Driver Cooling & Hydration

Coolshirt Red Female Bulkhead Fittings Bulkhead fittings for your Coolshirt cooling system. Two (2) are required for each cooler. FEATURES Female bulkhead fittings to replace broken fittings on your Coolshirt cooler Sold individually

Coolshirt Maintenance Additive was developed by Coolshirt technicians as the best way to keep Coolshirt driver cooling systems, tubing in your car, and your Coolshirt garments clean and clear of mold. This non-toxic, biodegradable solution contains a fungicide, yet it's safe to use in all Coolshirt cooling systems. Regular use of Coolshirt Maintenance Additive will not only help clean your system, it will also improve the performance and life of the system pump. Use 2 oz. of additive every time your Cooling system is used (6 oz. for the large multi-person pit cooling systems).

Chillout Systems Replacement O-Rings (10-Pack) This complete O-ring kit consists of ten universal ringed seals that prevent spillage.

Coolshirt Hose Connectors FEATURES: 5/16" connectors that work with your Coolshirt system as well as others. Sold individually, you'll need two to adapt a garment properly. Choose connector style: Male or Female. SYSTEM COMPATIBILITY (Coolshirt/Momo/F.A.S.T.): Coolshirt MALE connectors work with any FEMALE connector (Coolshirt, Momo or F.A.S.T.). So no matter which system you have, a Coolshirt Coolwater shirt will work with it because of the MALE connector on the shirt. If you own a Momo or F.A.S.T. cooling shirt and want to use it with a Coolshirt system, simply purchase two Coolshirt MALE connectors, snip off the connectors on your shirt, and replace them. That's it! Because the Coolshirt male connectors are universal, your shirt will now be usable with all three major cooling systems. Even if you’ll be racing in another car which uses a F.A.S.T. or Momo system, the new Coolshirt MALE connectors you just pushed on will work with it.

Coolshirt Endurance Ice The perfect solution for keeping the water in your Coolshirt cooler ice-cold at the track. Endurance Ice contains a specially formulated, leakproof, long-lasting viscous gel refrigerant made with non-toxic ingredients. No more running to the store for more ice! Endurance Ice is the ultimate in refrigerant cold packs. Choose from 12-, 24-, or 32-oz. cold packs. FEATURES Long lasting cold Efficient transfer of energy Leakproof, non-toxic gel Re-usable and economical

FluidLogic Wave The new WAVE of hydration is here!  The Fluidlogic WAVE is a complete hydration system that keeps your drink of choice cold and secure for your entire ride. Magnetic nozzle dock ensures quick one handed hydration with the flick of the wrist.  Features & Benefits Kitchen grade stainless steel is roost and rust resistant.  Quick release bottle mount secures to any roll bar for convenient filling.  Available in 32oz and 64oz capacity for short and long rides  Keeps your drink cold for up to 8 hours  Keep your eyes on the road ahead with quick one-handed megentic operation  Stay hydrated outside your vehicle when parked at your favorite spot Dust resistant silicone bite valve prevents dust and sand from sticking to the bite-valve Insulated dairy-grade tubing keeps your drink cold in route to you     Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day  Includes: 32oz or 64oz stainless steel bottle Roll bar quick release mount & hardware 7.5ft of Dairy grade insulated draw tube Magnetic draw hose dock Dust & drip resistant silicone bite valve Varying length straps for securing draw tube to roll bar

FluidLogic Containment Bottle (Bottle and Mount Only) The new WAVE of hydration is here!  The Fluidlogic WAVE is a complete hydration system that keeps your drink of choice cold and secure for your entire ride. Features & Benefits  Kitchen grade stainless steel is roost and rust resistant.  Quick release bottle mount secures to any roll bar for convenient filling.  Available in 32oz and 64oz capacity for short and long rides  Keeps your drink cold for up to 8 hours  Stay hydrated outside your vehicle when parked at your favorite spot    Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day  Includes: 32oz or 64oz stainless steel bottle Roll bar quick release mount & hardware

FluidLogic 360 Helmet Side Kit Everything needed to completely set up any helmet to connect with the FluidLogic Flush 360 System Includes: Helmet Side Flush 360 Aquacom Pro (smaller mic size) Aquacom Baja (larger mic size) 4mm tubing

FluidLogic Coaxial Helmet Side Kit Everything needed to completely set up any forced air helmet to connect with the FluidLogic Coaxial System.  Includes: Coaxial Helmet Side Maglock Aquacom Pro (smaller mic size) Aquacom Baja (larger mic size) 4mm tubing

Maglock Air Hose **Maglock Air hose side NOT included** Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend our hose to be paired with Maglock Air.

Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system. The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED: 3" Air Duct Plenum

Chillout Carbon Top Air for Stilo Designed for performance, the Chillout Carbon Fiber Top Air Aplliqué for Stilo directs air via the rear intake barb and through small holes located on all ST5 helmets.  Constructed from ultra light weight and incredibly resilient, pre-impregnated, dry carbon fiber, the front deflector improves vision by directing air towards the visor and away from the eyes. Old air flows out of the rear holes and from the bottom of the helmet, forcing out hot air and CO2 build-up.  FEATURES Constructed from 1mm dry 3k 2x2 twill weave carbon fiber Connects directly to the Maglock or FluidLogic Helmet air system  Compatible with most Stilo helmets Ultra lightweight and durable  One piece carbon fiber construction, no glue or plastic used. **Maglock & helmet NOT included** **Shown on helmet for refence only**

BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet, clear   Kit consist of:1 Pcs FORCED LOW PROFILE NOZZLE1 Pcs COVER PLATE2 Sets* SEAL KIT *Each SEAL KIT set contains 2 pieces of 20 x 80mm and 2 pieces of 20 x 120mm.

Sparco Ice Vest Introducing the Sparco Ice Vest: Unleash Your Full Potential with Advanced Driver CoolingTake your racing performance to new heights with the Sparco Ice Vest, a cutting-edge solution designed to optimize driver cooling before and after races. Engineered with precision and backed by extensive research, this vest is a game-changer for drivers who prioritize peak performance and recovery. The Sparco Ice Vest was originally developed for Sparco’s professional drivers in Formula 1 and INDY Car. The Ice Vest is designed to be used before and after racing. Cooling the body core temperature before driving has proven to help driver performance. The Ice Vest uses eight reusable medical grade ice packs placed strategically in the vest. The Ice Vest has internal mesh pockets for maximum cold transfer and a waterproof membrane. The medical ice packs are non-allergenic and reusable. Available in X-Small - XXX-Large.Key Features of the Sparco Ice Vest:Advanced Cooling Technology: The Sparco Ice Vest employs state-of-the-art cooling technology to regulate body temperature effectively. By utilizing advanced materials and innovative design, it ensures rapid cooling and heat dissipation, allowing you to maintain focus and perform at your best.Pre-Race Cooling: Before stepping into the cockpit, it's crucial to prepare your body for the demanding race ahead. The Sparco Ice Vest offers superior pre-race cooling, helping to lower core body temperature and optimize your physical and mental readiness. Experience heightened concentration and stamina from the moment the race begins.Post-Race Recovery: Racing can take a toll on your body, leading to heat buildup and fatigue. The Sparco Ice Vest provides exceptional post-race cooling, aiding in the recovery process. By reducing inflammation and promoting efficient heat dissipation, it accelerates recovery time, allowing you to bounce back faster and be ready for the next challenge.Ergonomic Design for Maximum Comfort: The Sparco Ice Vest is meticulously designed for a comfortable and ergonomic fit. Its lightweight construction ensures unrestricted movement, while adjustable straps allow for a personalized and secure fit. Stay cool and comfortable throughout the race, with no compromise on performance.Durable and High-Quality: Built to withstand the rigors of motorsport, the Sparco Ice Vest is made from premium materials, guaranteeing long-lasting performance. The vest's durability ensures it can withstand the demands of intense racing environments, providing reliable cooling support race after race.Be sure you can continue to operate at your full potential on the track with the Sparco Ice Vest. Engineered for optimal driver cooling before and after races, this innovative gear is a must-have for serious racers seeking a competitive edge.Don't let heat hinder your performance or delay your recovery. Invest in the Sparco Ice Vest today and experience the power of advanced driver cooling.

Chillout Chill Station - Pit Cooler Every team wants to win the race, make sure your team is equipped to and is performing at their very best by staying cool under the heat and pressure of competition.  Pre-cool your drivers while keeping your crew comfortable and focused with our extremely powerful and light weight pit cooler system. The Chill Station easily keeps 6 adults cool (or up to 12 adults with 6 x Y split hoses) thanks to 3 super powerful 1,870 BTU rotary micro-compressors on board. A sizable 40 liter per minute pump system maintains 20 psi at all times ensuring everyone connected remains cool.A real game changer, the Chill Station creates a micro-climate inside that keeps you sweat free while out of the car. Perfect for endurance teams with multiple drivers and teams that are operating in intense climates on track.CHILLOUT CHILL STATION PIT COOLER FEATURES: 3 x 1,870 BTU rotary micro-compressors Connect up to 12 adults (using our Y-split hoses) Pumps 40 L per minute at 20 psi CHILLOUT CHILL STATION PIT COOLER INCLUDES: Chill Station Power Cable