C3 Carbon Products

C3 Carbon Porsche GT2 RS Wing End Plates FITS: 991.2 Porsche GT2 RS C3 Carbon GT2 RS 100% carbon fiber rear-wing end plates offer the uncompromising look, fitment, and finish to match the GT2 RS carbon rear wing perfectly.  C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are simply glorious. These really are the pieces Porsche should have put on the GT2 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in high-gloss or matte/satin clear automotive urethane top coat, or satin black top coat. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Available in gloss or matte/satin clear, or satin black top coat OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel FITS: 2016+ Ferrari F488 GTB Coupe only Stunning carbon fiber panel to add a bit of flair to your 488 GTB engine bay. This piece installs against the firewall under the glass backlight, replacing the stock flat-black plastic trim. C3 Carbon uses ultra-precise CNC-machined billet moulds to create this incredible pre-preg dry carbon fiber replacement with quality, fit, and finish equaling expensive factory Ferrari carbon pieces. C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship at a reasonable price. Installation is simple. This piece can be paired with C3 Carbon engine surrounds in the Engine Bay Carbon Kit for a stunning upgrade of your car's engine bay. FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon McLaren MP4-12C/650S Carbon Fiber Coolant Tank Cover (Ribbed) FITMENT: McLaren MP4-12C (2012-2014) McLaren 650S (2015-2016) Add visual flair to your McLaren's engine bay with a new carbon fiber coolant tank cover from C3 Carbon. A direct replacement for the factory part on the McLaren MP4-12C or 650S, this beautifully finished and easy to install carbon fiber piece adds a bit of drama that reflects the McLaren's racing heritage. C3's autoclaved, pre-impregnated dry carbon fiber cover is engineered for a perfect fit and is finished flawlessly. C3 has matched the OEM McLaren 3K, 2x2 twill weave for a factory-original McLaren appearance. Choose between brilliant high-gloss or satin clear finishes. This part can also be purchased as part of a complete McLaren Engine Bay Carbon Package! FEATURES: Autoclaved pre-preg dry 3K carbon fiber with 2x2 twill weave matched to McLaren OEM carbon fiber Clear-coated with premium automotive urethane OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Fiber Shift Paddles Enhance the beauty of your MP4-12C cockpit with C3 Carbon shift paddles. C3's autoclaved, pre-impregnated dry carbon cfiber shift paddles install easily and fit perfectly, bringing you the beauty of carbon fiber every time you drive your McLaren. C3 has matched the OEM McLaren 3K twill weave for a perfect original factory appearance. Easy installation using incredibly strong 3M VHB 5952 double-sided tape makes this a must-have for any 12C owner. All 2012-15 McLaren MP4-12C models Features Autoclaved pre-preg dry 3K carbon fiber with OEM McLaren-matched twill weave. Clear-coated with automotive urethane, hand polished to a mirror finish Precise fit without any modification Installs in minutes using 3M VHB (Very High Bond) double-sided tape Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds Stunning carbon fiber engine cover panels are an excellent upgrade for your 488 GTB! Ferrari displays the gorgeous 488 GTB V8 engine under a glass bonnet, but the stock flat-black plastic engine covers are a significant let down. C3 Carbon uses ultra-precise CNC-machined billet moulds to create incredible pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish equaling the incredibly expensive factory Ferrari carbon pieces! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship, but at a reasonable price. Straightforward installation makes this a favorite our 488 GTB customers. For the complete carbon treatment for your whole 488 GTB engine room, see our Complete 488 Engine Kit. FITS: 2016+ Ferrari F488 GTB Coupe (for Spider, click here). FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Huracan LP610 Carbon Fiber Engine Cover FREE SHIPPING! Beautiful carbon fiber replacement for the black plastic engine cover on the Lamborghini Huracan LP610. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber engine cover installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of this carbon fiber piece is the perfect upgrade to the Huracan engine room. Fitment: 2014+ Lamborghini Huracan FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products: Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Engine Oil/Latch Cover Stunning carbon fiber engine accessory cover sits front and center in your 488 engine bay. Ferrari displays the 488's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic oil fill/latch cover (front-and-center under the bonnet) is a significant let down. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber replacement fits and functions as perfectly as the factory piece (for which Ferrari charges a fortune) and brings the 488 engine bay up to standard. C3 matched the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Easy installation makes this a must-have for any 488 owner. FITS: 2016+ Ferrari F488 GTB and Spider FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Urus Carbon Fiber Engine Bay Panels FITS: Lamborghini Urus/Urus S/Urus Performante (2019+)   Spectacular carbon fiber replacements for the black plastic engine bay on the Lamborghini Urus. The quality, beauty, fit, and finish of C3 Carbon for your Lamborghini is unsurpassed. Unlike many competitors, C3 Carbon autoclaves pre-impregnated (pre-preg) dry carbon fiber -- not carbon over fiberglass -- bringing you true factory-level pieces at an affordable price. C3 matches the original Lamborghini 2x2, 3K twill carbon weave perfectly for a uniquely Lamborghini appearance. We have combined matte and gloss finish on the plenum cover to make your Urus truly stand out.  The C3 carbon fiber engine bay is the perfect upgrade to show off the Urus's one-of-a-kind engine. FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 2000 F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 Spider Carbon Fiber Engine Bay Stunning carbon fiber engine bay trim panels are a spectacular upgrade for your 488 Spider! Ferrari displays the 488 Spider's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic engine trim is a significant let down. C3 Carbon uses an autoclave to mould pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish that rival the factory carbon upgrade (for which Ferrari charges a fortune), bringing the 488 Spider engine room up to standard! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Straightforward installation makes this a very popular upgrade for our 488 Spider customers. FITS: 2016+ Ferrari F488 Spider FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Huracan LP610 Carbon Fiber Rear Vent Panels Beautiful carbon fiber replacement for the black plastic trim panels surrounding the Lamborghini Huracan LP610's rear engine hatch. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber panels install simply with no modification, bringing you the most accurate, beautiful fit and finish available anywhere. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of these carbon fiber piece adds so much flair to the engine cover of Lambo's one-of-a-kind Huracán. Fitment: 2014+ Lamborghini Huracán FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Install easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 458 Spider Engine Bay Trim Panels Ferrari displays the 458 Spider's beautiful turbocharged V8 engine under a glass rear bonnet, but the stock flat-black plastic trim panels let the side down. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber panels offer OEM factory fit and finish for a fraction of the Ferrari catalog prices, bringing your 458 Spider's engine bay up to standard. C3 matches the OEM Ferrari 3K plain 1x1 weave perfectly for a factory-original Ferrari appearance. Easy installation makes this a must-have for any 458 Spider owner. FITS: 2011-15 Ferrari F458 Spider FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to factory Ferrari carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Straightforward installation requires no modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Door Sills Gorgeous carbon fiber door sill plates for your Ferrari 488 GTB or Spider. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber Sill Plates install easily and fit perfectly, bringing you the beauty of carbon fiber every time you step into your 488. C3 matches the OEM Ferrari 1x1 3K plain weave for an original Ferrari factory appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. FITS: 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 812 Carbon Fiber Engine Kit When you open the hood of your 812, you see a beautiful 6.5L Ferrari V12 surrounded by dull-black plastic trim. Replace that trim with C3's autoclaved, pre-impregnated (pre-preg) dry 3k carbon fiber engine bay trim. Fit and finish are as perfect as the factory carbon pieces, bringsing the beauty of carbon fiber to your engine bay. C3 has matched the OEM Ferrari 1x1 weave for an original Ferrari appearance. Easy installation makes this a must-have for any 812 owner. Fits 2018-2023 Ferrari 812 Superfast and 812 GTS C3 CARBON FIBER 812 ENGINE KIT INCLUDES SEVEN PIECES; Left airbox cover Right airbox cover Right engine bay trim panel Left engine bay panel Right service panel Left service panel ECU Cover C3 CARBON FIBER 812 ENGINE KIT FEATURES: Autoclaved pre-preg dry 3k carbon fiber with 1x1 weave matched to Ferrari OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari F12 Carbon Fiber Shift Paddles Direct replacements for the factory fitted shift paddles on the Ferrari 812, these beautifully finished and easy to install carbon fiber shift paddles from C3 Carbon add style to your 812. C3's autoclaved, pre-impregnated dry 3k Carbon Fiber Shift Paddles install easily, fit perfectly, and perform flawlessly. C3 has matched the OEM Ferrari 1x1 weave for a perfect original Ferrari appearance. This a must-have for any 812 owner. All 2018-2024 Ferrari 812 and 812 GTS models FERRARI 812 CARBON FIBER SHIFT PADDLE FEATURES Autoclaved pre-preg dry 3k carbon fiber with 1x1 weave matched to Ferrari OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit "UP" and "DOWN" are silk-screened on the respective paddle Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.