Brand

Chillout Pro Sport Dual Layer Balaclava FIA and SFI Rated Heat and Fire Resistance Chillout Pro Sport underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to 8º F which will quicken your reflexes and reaction time on the track. Thermo Regulating The ultra-lightweight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need Chillout Pro Sport underlayers in your gear bag. Chillout Pro Sport Balaclava Details FIA Homologation Standard: FIA 8856-2018 SFI Homologation Specification: SFI 3.3 Sizes: one size Colors: black, charcoal, or white Composition: 42% M-Aramide, 42% Viscose FR, 16% EA Sizing and Usage Please ensure that your Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Appendix L (Chapter III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. Maintenance of Chillout Pro Sport Underlayers Chillout Pro Sport flame resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. Embroidery/Labels on Chillout Pro Sport Underlayers Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. Cleaning/Maintenance of Chillout Pro Sport Underlayers The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments. EEC Certification/Guarantee of Chillout Pro Sport Underlayers Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.

Complete Chillout Pro Sport Racing Underwear Package Build a complete fire-resistant racing underlayer system with the Chillout Pro Sport Racing Underwear Bundle. This package combines the Pro Sport underlayer shirt, pants, dual-layer balaclava, and racing socks into one coordinated FIA 8856-2018 and SFI-rated setup. Chillout Pro Sport underlayers are engineered around lightweight construction, breathability, thermal regulation, and driver comfort. The technical fabric helps manage heat and moisture inside the cockpit while maintaining the fire-resistant protection required for competitive motorsport. Available in multiple colors and sizes, the Pro Sport system makes it easy to configure a complete head-to-toe underlayer package for track days, club racing, endurance events, and professional competition. What's Included 1x Chillout Pro Sport Dual Layer Balaclava – FIA 8856-2018 and SFI-rated fire-resistant head and neck protection 1x Chillout Pro Sport Underlayer Shirt – Lightweight fire-resistant long-sleeve racing top 1x Chillout Pro Sport Underlayer Pants – Lightweight fire-resistant racing bottoms 1x Chillout Pro Sport Socks – Fire-resistant racing socks designed to complete the Pro Sport system Chillout Pro Sport Bundle Features FIA Homologation: FIA 8856-2018 approved components SFI Rated: Designed to meet applicable SFI fire-resistant apparel requirements Complete Underlayer System: Shirt, pants, balaclava, and socks included Thermal-Regulating Fabric: Designed to help manage driver body temperature in demanding cockpit conditions Ultra-Lightweight Construction: Helps minimize bulk underneath a racing suit High Breathability: Technical materials promote airflow and moisture management Stretch Construction: Provides a close, comfortable fit with freedom of movement Antibacterial Technology: Integrated fabric technology helps control odor during extended use Multiple Colors: Shirt, pants, and balaclava options are available in black, charcoal, and white depending on inventory Chillout Pro Sport Underlayer Shirt The Chillout Pro Sport Shirt uses an ultra-lightweight fire-resistant fabric engineered to improve airflow and comfort underneath a racing suit. Its stretch construction provides a close fit without unnecessarily restricting driver movement. The shirt is made from a technical blend of 42% M-Aramide, 42% Viscose FR, and 16% EA and is homologated to FIA 8856-2018 and applicable SFI standards. Chillout Pro Sport Underlayer Pants The Pro Sport Pants use the same lightweight, breathable construction as the shirt to create a coordinated lower-body layer. Their stretch fabric allows the garment to sit smoothly underneath a fire suit while helping manage heat and moisture during long sessions. The pants are available in sizes XS through XXL and in multiple colors depending on availability. Chillout Pro Sport Dual Layer Balaclava The Chillout Pro Sport Dual Layer Balaclava provides additional fire-resistant protection around the driver's head and neck while maintaining the lightweight and breathable characteristics of the Pro Sport system. The balaclava is FIA 8856-2018 homologated and SFI 3.3 rated, with a stretchable one-size design available in black, charcoal, or white depending on inventory. Chillout Pro Sport Socks Chillout Pro Sport racing socks complete the underlayer system with lightweight fire-resistant protection for the feet and lower legs. Their technical knit construction is designed to maintain comfort and pedal feel while helping manage moisture inside racing shoes. The socks are available in Small, Medium, and Large with black and white color options depending on inventory. Sizing Chillout Pro Sport shirts and pants are available in sizes XS through XXL. Select the appropriate size and color for each garment when configuring your bundle. The balaclava is one size, while Pro Sport socks are available in Small, Medium, and Large. Each component should be selected independently for the best overall fit. For maximum protection and comfort, Chillout recommends that garments should fit properly without being excessively tight. The shirt and pants should maintain appropriate overlap at the waist, while the balaclava and shirt should provide continuous coverage around the neck. FIA 8856-2018 & SFI Racing Protection The Chillout Pro Sport collection is designed for racers who want certified fire-resistant protection with an emphasis on lightweight construction, airflow, and cockpit comfort. Combined with an approved racing suit, gloves, shoes, and helmet, the Pro Sport system creates a complete foundation for competitive motorsport apparel.

Chillout Pro Sport Fire Resistant Socks The Chillout Pro Sport underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track.  The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to 8º F which will quicken your reflexes and reaction time on the track. The ultra-lightweight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body.  The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint.  If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.  Chillout Pro Sport Socks Details FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: S / M / L Colors: BLACK, WHITE Composition:28% Aramide, 28% Viscose FR, 22% Modacrylic, 18% Cotton, 4% Elastane Performance Chillout Pro Sport Socks Sizing and Usage Ensure that your Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles. The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. Maintenance of Chillout Pro Sport Socks Chillout Pro Sport Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear.  Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. Embroidery/Labels on Chillout Pro Sport Socks Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. Cleaning/Maintenance of Chillout Pro Sport Socks The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.  EEC Certification/Guarantee for Chillout Pro Sport Socks Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.

Chillout Pro Sport Fire Resistant Pants Chillout Pro Sport underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to 8º F which will quicken your reflexes and reaction time on the track. The ultra-lightweight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need Chillout Pro Sport underlayers in your gear bag. Chillout Pro Sport Pants Details FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: XS to XXL Colors: black, charcoal, or white Composition: 42% M-Aramide, 42% Viscose FR, 16% EA Sizing and Usage Please ensure that your Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Appendix L (Chapter III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. Maintenance of Chillout Pro Sport Underlayers Chillout Pro Sport flame resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. Embroidery/Labels on Chillout Pro Sport Underlayers Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. Cleaning/Maintenance of Chillout Pro Sport Underlayers The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments. EEC Certification/Guarantee of Chillout Pro Sport Underlayers Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.

Chillout Pro Sport Fire Resistant Shirt Chillout Pro Sport underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to 8º F which will quicken your reflexes and reaction time on the track. The ultra-lightweight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need Chillout Pro Sport underlayers in your gear bag. Chillout Pro Sport Shirt Details FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: XS to XXL Colors: black, charcoal, or white Composition: 42% M-Aramide, 42% Viscose FR, 16% EA Sizing and Usage Please ensure that your Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Appendix L (Chapter III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. Maintenance of Chillout Pro Sport Underlayers Chillout Pro Sport flame resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. Embroidery/Labels on Chillout Pro Sport Underlayers Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. Cleaning/Maintenance of Chillout Pro Sport Underlayers The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments. EEC Certification/Guarantee of Chillout Pro Sport Underlayers Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.

Chillout Remote Control For AirCon Helmet Cooler Engineered for Performance on the Track When your Chillout AirCon Helmet Cooler is mounted out of reach—like in the trunk or behind your seat—you need a smart way to control it. Enter the Chillout Remote Control: a compact, dash-mountable controller with a full-color digital display and a generous 10-foot cord. With this unit, you can power the system on and off, adjust temperature settings, and stay cool without ever having to reach around mid-session. This isn't just a convenience—it's essential for drivers who value control, comfort, and staying in the zone during hot sessions on track. Features: • Built specifically for the Chillout AirCon Helmet Cooler • Full-color digital display for quick at-a-glance settings • 10-foot cord offers flexible mounting anywhere in the cockpit • Lightweight, compact, and easy to install on your dash or console FAQs: Will this work with any Chillout system? No, this remote is designed exclusively for the Chillout AirCon Helmet Cooler. Where can I mount the remote? The 10-foot cord allows you to mount it on your dashboard, center console, or roll bar. Does it require tools for installation? Basic mounting tools may be needed, but setup is very simple. What’s included in the box? The remote unit and a 10-foot connection cord are included. Take full control of your in-car cooling system with this essential remote. A smart upgrade for any serious racer running the Chillout AirCon Helmet Cooler.

Chillout Systems 1.5 Liter Coolant Formula 1.5 liters of coolant lasts a racer an entire season! Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system. Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused. We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.

Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system. The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED: 3" Air Duct Plenum

Chillout Systems 3" Carbon Fiber NACA Duct Chillout Systems 3" NACA duct is manufactured in lightweight carbon fiber with the intention of reduced parasitic drag while providing cooling air for Chillout Systems coolers, driver helmets, oil coolers and more.  Chillout Systems 3" Carbon FIber NACA Duct Details: Manufacturer: Chillout Systems Manufacturer part number: CO-NP-3 Material: Carbon Fiber Hose Outlet Diameter: 3" Color: Carbon Fiber NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn't separate and cause turbulence and drag. Chillout Cooler sold separately.

Chillout Systems 3" Neoprene Air Duct Hose Chillout's Neoprene Air Duct Hose is extremely flexible, pliable and structurally strong thanks to a coated spring-steel wire helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. With a temperature tolerance between -45° F and 330° F (7º C and 165º C), the Chillout Neoprene Air Duct Hose is ideal for most racing applications, including channeling fresh, cool air to your Chillout Quantum Cooler. It's also perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can't be avoided. Under-hood applications such as connecting an air intake to an airbox, or an airbox to a throttle body are also great uses. Choose 6-foot or 12-foot overall length. Chillout Neoprene Air Duct Hose Features: 3 inch interior diameter High strength and flexibility Up to 330º F (165º C) heat resistance Product SKU: CH-ADH3

Chillout Systems 3" Ultra Transparent NACA Duct For racers who demand maximum airflow and minimal drag, the Chillout Systems 3" Ultra Transparent NACA Duct is the real deal. Engineered with wind tunnel precision and made from durable crystal-clear injection-molded plastic, this is the duct that doesn’t cloud, crack, or compromise performance. Built for Airflow Dominance and Visual Clarity Features: Crystal-Clear Injection Molded Construction: Unlike cloudy, brittle vacuum-formed ducts, Chillout's ultra-transparent NACA duct is built to stay clear and structurally solid, even under harsh heat and UV exposure. 3-Inch Opening for Maximum Flow: Perfectly matched to Chillout's Uber3 275 CFM blower, 3” tubing, and 3” plenum for an airflow system that’s efficient and track-proven. IMSA Compliant: Fully legal for IMSA applications, giving you confidence in compliance without sacrificing performance. Drag-Reducing Design: The graceful widening arc of the NACA duct shape increases flow without disturbing boundary layers—so you get the air you need without the aerodynamic penalty. Track-Ready Durability: Injection molding ensures the duct retains its shape at speed, resists warping, and maintains optical clarity for the long haul. Chillout Systems 3" Ultra Transparent NACA Duct FAQs: Is this 3" NACA duct compatible with any blower system?No, it's specifically optimized to work with Chillout’s Uber3 275 CFM blower and 3-inch ducting and plenums for best results. Does the plastic stay clear over time?Yes. Unlike vacuum-formed plastic, the injection-molded construction resists heat and UV damage, maintaining its crystal-clear appearance. Is this legal for use in IMSA races?Yes. This NACA duct meets IMSA regulations and is designed with competition use in mind. Can this be mounted on fiberglass or carbon fiber panels?Absolutely. The duct is lightweight and easy to mount to fiberglass, carbon fiber, or metal body panels using standard installation techniques. When every bit of airflow counts and clarity is key, step up to the Chillout Systems 3" Ultra Transparent NACA Duct. It’s not just another intake—it’s a smarter way to cool your rig while keeping drag in check. Chillout Cooler sold separately.

Chillout Systems 4-Inch 285 CFM Blower An ultra-efficient and lightweight design, the Chillout 4-inch 285 CFM blower offers high air output and low amp draw. This is the most powerful and reliable blower in its class. Chillout Systems 4" 285 CFM Blower Featrues 285 cubic feet per minute (CFM) 4.7 Amps 12 Volts Lightweight, durable, and ultra-reliable

Chillout Systems 4" Carbon Fiber NACA Duct Ultralight weight and wind tunnel tested, the Chillout 4-inch NACA duct provides over 55% more airflow than a standard 3-inch NACA duct. Used in conjunction with 4-inch Neoprene Air Duct Hose and a 4-inch Chillout Carbon Fiber Plenum (both available in the drop downs above), the Chillout Carbon Fiber NACA Duct results in maximum cooling efficiency for your cooling system.NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn’t separate and cause turbulence and drag. FEATURES: Dry carbon fiber for light weight and durability. Wind tunnel tested. 55% more airflow than 3" NACA duct. Chillout Cooler sold separately.

Chillout Systems 4" Carbon Fiber Dual NACA Duct The Chillout Systems 4" Dual NACA Duct is extremely lightweight and wind tunnel tested, providing over 55% more airflow than standard 3" NACA ducts. Chillout Systems 4" Carbon Fiber NACA Duct (Dual) Details Manufacturer: Chillout Systems Manufacturer Part Number: CO-NP-42 Material: Carbon Fiber Hose Outlet Diameter: 3" Color: Black

Chillout Systems Carbon Fiber 4-Inch Air Duct Plenum Forcing fresh air to your Chillout Systems cooler is the most efficient way to increase cooling performance and reduce amp draw on your electrical system. The Chillout Systems Carbon Fiber Air Duct Plenum fits perfectly to the intake side of your Quantum V3 or Quantum Pro Cooler, allowing cool outside air to be forced through the cooler. Add a Chillout Neoprene Air Duct Hose and Carbon Fiber NACA Duct, and you have a highly-effective system forcing cool air across your Quantum Cooler's internals. A minimum 150 CFM blower (sold separately) can be used in conjunction with the plenum for added control of cool air flow. Makes Your Quantum Cooler...Cooler! The Chillout Systems Carbon Fiber Air Duct Plenum attaches via automotive-grade high bond double-sided tape, creating a firm seal to force cool air all the way through the system and back out the exhaust side of the cooler, the most efficient way to reach maximum cooling capacity. Coupling the Chillout Systems Air Duct Plenum with your Quantum Cooler ensures no cool air is wasted, maximizing the effectiveness of the system.

Chillout Systems Club Series Cooling Shirt   The goal with the Club Series cooling shirt is to provide drivers with most comfortable driver cooling shirt on the market, maintaining safety and comfort at an affordable price. Chillout nailed it! The Club Series is an entry level cooling shirt, but don't let that fool you. It's made from dual layers of soft stretch cotton concealing a strategically structured layer of thermal conductive cooling veins that target the most vital region of the body – the core.  They are designed to work with Chillout's incredible refrigerant-based Quantum Cooling system but work equally well with icewater-based systems like Coolshirt or F.A.S.T.  The Club Series shirt has cooling efficiency similar to other brands, but in a high-quality, custom designed shirt with the cooling veins hidden between two ultra thin layers of stretch fabric. The stretch fabric is crucial to holding the cooling veins close to the body where heat exchange takes place. With cooling veins constructed of a matte fire-resistant, self-extinguishing compound developed by the US military, this cooling shirt is rugged and durable, perfect for racing, HPDE, or test days..  Featuring dry-release hose connectors, spillage isn’t an issue because the fluid stops when disconnected. ADD CONNECTORS For maximum adaptability, Chillout shirts do not come with connectors. Choose the Chillout Dual Prong connector to connect to a Chillout Systems Quantum Cooler. You can purchase Coolshirt male connectors (sold separately) to hook up to your Coolshirt cooler.