All

D1-268 Girodisc Front Rotor Rings REPLACEMENT ROTOR RINGS ONLY. INCLUDES NEW INSTALLATION HARDWARE. DOES NOT INCLUDE ALUMINUM HATS. Competition Motorsport is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most Girodisc products the same or next business day to ensure we meet your delivery deadline. These Girodisc replacement rotor rings are direct replacements for the iron discs on your Girodisc two-piece rotors, and no modifications are necessary. New cap screws and washers are included with these replacement rotors. We do not recommend re-using the old hardware. These rings will not work with factory center hats. They are designed to work with Girodisc hats only. The replacement rotor rings and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor ring-only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/priced per pair.

The Meru IDS (Impact Damping System) is the most advanced head restraint system available, engineered to dramatically reduce the forces drivers experience during high-speed impacts. Whether you're competing wheel-to-wheel or logging laps on a test day, the IDS transforms safety expectations by managing head movement like no other system on the market. Meru Ascent IDS Carbon Head Restraint System Unmatched Head Control. Unrivaled Force Reduction. Unlike traditional systems that simply brace the head, the Meru IDS actively controls head motion—reducing both linear and angular acceleration during an impact. Through a proprietary speed-sensitive valve system, the IDS absorbs energy intelligently, offering exceptional comfort under normal conditions and maximum protection when it matters most. Key Features: Impact Reduction Like No Other: In a 70G impact, the IDS lowered head force from over 300 lbs (competitor) to just over 60 lbs—a near 80% reduction. Superior Neck Protection: Falls hundreds of pounds below both SFI and FIA upper neck tension thresholds. Engineered for Elite Safety: Custom CNC’d titanium hardware and a carbon fiber/Kevlar shell with a proprietary burst panel ensure durability and performance. Durability Built In: Withstands thousands of impacts without degradation in performance. Universal Fit: Adjustable moving headrest works in all seating positions—GT, formula, or prototype. Technology That Works With You The Meru IDS is built around a proprietary dampener system featuring speed-sensitive valving. This allows it to adapt in real-time—offering a soft feel during regular use and firm, controlled motion under extreme load. It's not just safe—it’s confidence-inspiring. If you're serious about racing and refuse to compromise on safety or comfort, the Meru IDS is your competitive edge. The forces to the head in the majority of auto racing accidents come from rotational energy which promotes angular acceleration. It has become rare to have a direct linear impact to the head. Traditional FHR's solid construction and tethering prevent the ability to mitigate angular acceleration forces. With traditional FHR’s in an impact the brain and head immediately speed up and then come to an immediate stop when the tether stops the helmet, which has a similar effect to hitting your head on a wall despite not leaving a scratch on the helmet.IDS technology immediately begins slowing the impact down, controlling the helmet's movement forward, thereby reducing the transfer of angular acceleration forces to the head and brain. Low Threshold Energy Recent medical research has provided alarming conclusions surrounding the causes, severity, and long-term effects of concussions. Even seemingly minor concussions may have much more serious long-term effects on the brain, especially when frequency is increased. The current crop of head restraints focus on limiting upper neck tension and leaving concussion prevention up to the helmet companies. With this well noted, the vast majority of impacts one might experience in auto racing qualify as low-threshold energy impacts. That is, impacts well below the pass/fail velocities of the certification standards, but severe enough to cause a concussion or a traumatic brain injury (TBI). Bumpy tracks, a big cushion in dirt cars, or a string of small crashes can do enough jarring to sustain a concussion or TBI without any obvious carnage to pair it with. IDS starts working the instant an impact begins and the speed sensitive valving makes the technology more compliant and progressive over a broad range of impact velocities common in real world racing while still exceeding the global standard pass/fail requirements. High Velocity Impacts Across the entire range of potential impact velocities, the Meru Ascent FHR with IDS technology consistently outperforms competitive designs. Meru meticulously engineers the collar, headrest, hardware, guards and IDS to provide the best possible impact mitigation performance across all impact velocities for both angular and linear accelerations. In a 70G force impact at the cape crash testing lab in Indianapolis, the Meru Ascent FHR with IDS reduced the concussion causing forces through the head from over 300 pounds with our best competition to just 63 pounds with our restraint. They were able to make those gains without giving up low-threshold energy protection or sacrificing neck safety. Time To Peak (TTP) Time-to-Peak (TTP) is how long it takes the energy of an impact to reach maximum g-force. Deceleration time is the single most beneficial component in reducing the severity and magnitude of any impact — the more time, the less energy transferred.Because of Meru's proprietary IDS technology, their speed sensitive dampener progressively lowers the head's velocity and almost triples the time to peak, spreading their already drastically reduced load over nearly triple the time. Upper Neck Tension The original FHR’s were designed to limit upper neck tension. At the time auto racing's biggest problem was basal skull fracture. Caused by the whiplash motion in an impact, basal skull fracture often severed spinal cords, resulting in death. The original FHR designs did wonders for limiting how far forward the helmet could travel in an impact eliminating the finished whipping motion. In testing to see how well FHR’s do at preventing basal skull fracture, Meru look at upper neck tension. This number is the main pass/fail standard for the safety organization.In Meru's mission of concussion prevention, the original FHR goal of lowered upper neck tension was not lost and they were able to come in several hundred pounds below the set standard either matching or besting the current industry leaders.

BBS CI-R Performance Series Wheels Not all finish options may be available on all fitments. Please call and talk to a Competition Motorsport custom wheel specialist at 844-438-7244. We'll make sure you get the set of wheels you've always wanted at a price no one can beat. These Performance Line wheels by BBS are a one-piece pressure cast wheels with a flow-formed rim and a spun inner rim using a proprietary BBS flow-forming process. All BBS wheels offer weight savings through industry-leading FEM analysis without compromising design or build quality. Available in a wide range of sizes, finishes and bolt patterns the BBS Performance Series has something for everyone. WHEEL WEIGHTS 19-inch: 23.1 to 26 lbs. 20-inch: 26.3 to 29 lbs. PLEASE NOTE While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Check with a Competition Motorsport wheels specialist for a complete quote and estimated lead time. "PFS" centerbore designation means the wheel comes with the BBS Precision Fitment System. Prices and weights are per wheel.

FITMENT (REAR): Ford GT Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. REPLACEMENT ROTOR RINGS ONLY. Need new rings for your Girodisc (or Brembo or Stoptech) two-piece rotors? We've got them. Replacement rings come complete with new hardware and full instructions for re-assembly. Or, if you like, you can send us the hats and we will do all the re-assembly for only the cost of shipping.  This service is available for the life of your rotors.Price is for a pair of rings and two hardware kits.

D1-043 Girodisc Front Replacement Rotor Rings FITMENT (Front): Ford GT Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. Need new rings for your Girodisc (or Brembo or Stoptech) two-piece rotors? We've got them. Replacement rings come complete with new hardware and full instructions for re-assembly. Or, if you like, you can send us the hats and we will do all the re-assembly for only the cost of shipping.  This service is available for the life of your rotors.Price is for a pair of rings and two hardware kits.

Lifeline Zero 360 FIA 2.25kg FK 5-1-12 Fire Marshal System The Lifeline Zero 360 FIA 2.25kg FK 5-1-12 Fire Marshal System delivers championship-winning motorsport fire safety in a compact and lightweight package. Developed through extensive research and FIA testing by the British Standards Institute, this system convincingly meets the highest standards of racing fire suppression. With FIA homologation EX.028.08, it provides proven performance for club racers and professionals alike. Lightweight, Compact, FIA-Approved Protection Using FK 5-1-12 suppressant (the advanced replacement for Novec 1230), the Zero 360 Fire Marshal offers superior fire knockdown capability while being safe for electronics and residue-free. At just 2.25kg, it is significantly smaller and lighter than foam-based FIA systems, making it easier to package inside modern competition cars. This system is trusted by world championship-winning constructors and now available at a competitive price under the Fire Marshal brand. Key Features & Benefits FIA homologation EX.028.08 – compliant with international motorsport regulations. Compact 2.25kg bottle size, typically accepted as equivalent to a 5 lbs system (check series rules). Uses FK 5-1-12 clean agent suppressant (replaces Novec 1230) – lightweight, effective, and safe for electronics. Constant discharge in any orientation for reliable performance. Two-year service cycle for long-term convenience. Proven fire knockdown and fire-out capabilities. High-quality components and construction for durability and reliability. Kit Includes 1x 6m 8mm Tube 1x Bracket and Straps 2x Straight Inlet Nozzles 3x Double Z Nozzles 1x 8mm Equal T Connector 1x 8mm Bulkhead Fitting 5x Tube Clips 1x 4-Way Connector 1x Decal Pack 1x 2m (6ft) Pull Cable 1x 4m (12ft) Pull Cable 1x Cable Nipple Why Choose the Lifeline Zero 360 FIA 2.25kg Fire Marshal? This system combines FIA-approved safety, compact dimensions, and exceptional fire suppression performance. Ideal for drivers looking to upgrade from traditional foam systems, the Zero 360 Fire Marshal offers the lightweight benefits of FK 5-1-12 suppressant with the reassurance of proven FIA certification. It’s the perfect entry point into Lifeline’s world-class fire suppression technology at an accessible price point. Note: This 2.25kg system is typically accepted as equivalent to a 5 lbs bottle. Please check your series’ regulations for confirmation. Lifeline Fire Suppression System FAQs Is the Lifeline Zero 360 FIA 2.25kg Fire Marshal FIA approved?Yes. This system carries FIA homologation EX.028.08 and has passed FIA fire suppression testing conducted by the British Standards Institute and observed by the MSA. It is fully legal for use in international motorsport competition. What suppressant does this system use?The system uses FK 5-1-12 clean agent, the advanced replacement for Novec 1230. It is highly effective at suppressing fires, completely safe for sensitive electronics, and leaves no residue behind compared to powder or foam extinguishers. How does the 2.25kg size compare to other FIA fire suppression systems?The 2.25kg bottle is significantly smaller and lighter than traditional foam-based FIA systems, making it easier to install in modern race cars. It is typically accepted as the equivalent of a 5 lbs system, though competitors should confirm their series’ specific requirements. What is included in the Fire Marshal kit?The complete kit includes the FIA-approved 2.25kg aluminum cylinder, 6m of 8mm tubing, bracket and straps, two straight inlet nozzles, three double Z nozzles, connectors, bulkhead fitting, tube clips, a decal pack, and both 2m and 4m pull cables for installation. Who is this system best suited for?The Lifeline Zero 360 FIA 2.25kg Fire Marshal is ideal for club racers and teams upgrading from foam systems, as well as competitors in FIA-regulated events seeking a compact, lightweight, and cost-effective fire suppression solution.

Sparco Extrema S Driver Race Suit Save $750 Off The Suggested Retail Price! The Sparco Extrema S racing suit takes the same patented Hocotex® material used in Sparco's successful Eagle line and incorporates it into a classically-styled fire suit. Three times as breathable as a traditional multi-layered racing suit, 360º fully-floating arm gussets on the Sparco Extrema S are combined with a stretchable mesh back panel for maximum flexibility and comfort. Extra-flat seams provide additional comfort, while traditional design touches such as classic Sparco epaulettes and seamless ankle/wrist cuffs make this suit a perfect platform for sponsor logos! How Does Sparco Hocotex® Work? Racing suits are traditionally constructed using multiple layers of fabric sewn together with an embroidered quilted pattern. This quilting creates air pockets between the layers which expand when exposed to extreme heat and flames, creating a thermal protection barrier for the driver. Sparco Hocotex® uses a honeycomb structure with over 60,000 internal air cells, compared to 300 quilted chambers in a traditional suit. The result is a 10% to 12% increase in protection from heat versus the traditional quilting method. Sparco Extrema S Driver Race Suit Details: FIA 8856-2000 approved Weight: 290 to 320 g/m2 Pre-curved arms and legs Strategically-placed mesh stretch panels Seamless arm and leg cuffs Available in white or black Available in EU sizes 48 to 66

AP Racing 345x30mm Replacement J Hook Front Floating Racing Brake Rotors Fit The Following Cars (w/ OEM Iron Rotors)- Center hat Excluded, rotor discs and hardware only. Replacement Disc Only For AP Racing 13.01.20042 Fit The Following Cars (w/ OEM Iron Rotors) Corvette C8 Z51  AP Racing by Essex 2-piece Competition J Hook front disc pair for Corvette C8 Z51 with iron discs 345mm x 30mm (13.59" x 1.18") 72 Vane, D66 Huge increase in airflow, cooling capacity, and durability vs. OEM discs Saves 2 lbs. unsprung weight per side vs. OEM iron discs Designed for: club racing, time trial, auto-x, HPDE Works with OEM calipers, no modifications required Ultralight, fully floating, anodized billet aluminum hat with float control/anti-rattle clips Sold/priced per pair of rotor rings (including hardware). AP Racing J Hook Brake Rotors – The Gold Standard in Track Day & Racing Performance Engineered for professional motorsport, HPDE, and dedicated track day use, AP Racing’s J Hook Brake Rotors deliver uncompromising performance, thermal stability, and consistent braking power. These two-piece, floating rotors are built to handle the extreme demands of road racing, with design features derived from over 50 years of elite competition—including Formula 1, NASCAR, and IMSA. Unlike conventional one-piece rotors, AP Racing’s two-piece floating design features a billet aluminum hat mated to a cast iron disc via precision-engineered bobbins. This setup allows for controlled radial expansion under high heat, minimizing distortion and coning. The result? More even pad wear, a firmer pedal feel, and longer component life, even during extended lapping sessions or endurance racing. Floating hardware includes anti-knockback spring clips that reduce piston retraction while eliminating common NVH issues like rattling. Why Choose AP Racing J Hook Rotors? Advanced Cooling, Superior Bite, Unmatched Durability At the heart of every rotor is AP Racing’s proprietary high-carbon iron alloy, developed to withstand repeated thermal cycling without cracking or warping. Internally, directional vanes—far superior to OEM pillar or straight vane designs—maximize airflow and cooling. With 60 to 84 vanes per rotor, AP Racing achieves faster heat evacuation, reduced brake fade, and a more consistent friction surface. These rotors are left/right-specific for optimal airflow and balance. The exclusive J Hook slot pattern offers enhanced initial bite and promotes uniform heat distribution across the rotor face, reducing pad deposits and vibration. Unlike drilled rotors or straight-slot competitors, the J Hook design provides cleaner pad transfer during bed-in and superior modulation under braking—ideal for serious drivers who demand feedback and control. Yes, you might hear a little more whirr, but you’ll gain the stopping power, consistency, and longevity your lap times demand. Premium Components, Affordable Performance The rotor hats are CNC-machined from 6061-T6 billet aluminum and hard anodized for strength and heat resistance. Scalloped edges under the hat further assist heat dissipation. All hardware is U.S.-made to AP Racing spec, the same quality found on pro-level racing platforms. And while these rotors are race-proven, they’re also surprisingly cost-effective to replace. Don’t settle for cheap rotors that crack after a weekend—AP’s J Hook rings offer better durability and real long-term value. Fewer replacements mean more track time, less downtime, and peace of mind knowing you're running the best. Used by Champions. Trusted by Experts. From endurance racers to HPDE enthusiasts, AP Racing brake rotors are trusted worldwide for their reliability, longevity, and performance under pressure. Whether you're shaving seconds off your lap time or building a dedicated track car, the J Hook delivers a professional-grade solution that won’t let you down.   AP Racing J Hook Brake Rotors for Auto Racing, Track Days & HPDE Why Rotor Design Matters: Heat Expansion and Floating Technology As with most metals, iron brake discs expand significantly under heat. When temperatures rise, the disc grows radially—expanding in both diameter and circumference. Traditional one-piece rotors struggle to accommodate this natural expansion. As the outer edge pulls away from the center under heat stress, it creates a condition called “coning”—a distortion that compromises pad-to-rotor contact. This distortion can lead to uneven pad wear, brake tapering, and an inconsistent, long brake pedal. AP Racing two-piece floating brake rotors are purpose-built to eliminate these issues. Engineered with “float” built into the disc or hat assembly, these rotors feature oblong-shaped mounting holes that allow the hardware to slide as the disc heats up. This flexibility ensures the disc runs true within the caliper under high-temperature loads, effectively reducing distortion, minimizing pad taper and stress cracks, and promoting longer component life. Custom Mounting Hardware & Anti-Knockback Spring Clips AP Racing rotors utilize application-specific, U.S.-made mounting hardware—not generic bolts. These premium components are the exact parts used in AP’s professional motorsport products, engineered to withstand the rigors of competitive racing. To manage lateral disc motion that can push caliper pistons backward (known as knockback), AP Racing integrates anti-knockback spring clips on alternating bobbins—five on a ten-bolt setup, six on a twelve-bolt disc. These clips keep the aluminum hat and iron disc ring properly aligned while still allowing for radial float. Bonus: they eliminate annoying rattles and vibrations, ensuring a quieter, more refined braking experience. High-Performance Hat Design for Heat Isolation The disc hats in AP Racing’s two-piece floating rotors are CNC-machined from 6061-T6 billet aluminum and finished with a hard anodized coating. This high-strength aluminum alloy was selected for its ability to maintain structural integrity even at elevated temperatures. AP adds scalloped channels beneath the hat to further encourage airflow and heat evacuation from the outer disc face, minimizing thermal transfer to hubs and wheel bearings—helping reduce maintenance costs on these expensive components. Internal Vane Engineering: Airflow Optimization & Thermal Stability AP Racing’s internal vane design sets them apart from OEM and most aftermarket competitors. While many factory brake discs use non-directional pillar vanes (low-cost and NVH-focused), AP Racing rotors use directional vanes engineered for maximum airflow. These rotors are side-specific—meaning you’ll receive a unique left and right disc in each set—ensuring optimized cooling through strategic vane orientation and shape. Beyond that, AP Racing rotors feature a superior vane count, typically ranging from 60 to 84 vanes, compared to 30–48 in most aftermarket rotors. After extensive CFD and thermal analysis, this high vane count was proven to: Increase airspeed and thermal transfer Reduce recirculation and deflection at the disc face Minimize coning, cracking, and brake fade Deliver more even pad contact and extended rotor life J Hook Slot Pattern: Exclusive to AP Racing Slots and drill holes may improve initial bite, but they also introduce “cool spots” in the rotor face—areas of uneven heating that can lead to stress risers, cracks, and pad vibration. OEM rotors often avoid this by leaving the disc face blank, but that compromises bite and brake feel. AP Racing’s patented J Hook design, developed through rigorous R&D, solves this problem. The hooks are meticulously spaced around the disc’s circumference and from hat to edge, forming a continuous distortion path that ensures even heat distribution. This encourages uniform pad deposits during bed-in, helps reduce judder and cracking, and improves consistency under repeated high-load braking. In addition, the J Hook slots provide more leading edges for pads to grip than traditional curved slots or blank rotors. While this might generate a mild whirring sound during braking, the benefits—more bite, cleaner bedding, better pedal feel—make it the top choice for committed racers and serious track day drivers. Metallurgy Backed by 50+ Years of Motorsport Leadership AP Racing's reputation is built on performance, and their proprietary iron alloy used in J Hook rotors is no exception. Drawing from over five decades of elite motorsport experience, including 750+ Formula 1 wins and widespread use across NASCAR, AP’s engineers have developed a disc alloy that excels under sustained racing temperatures and stress. Where OEM discs focus on affordability and mass production, AP Racing’s J Hook rotors are purpose-built for motorsport durability and heat resistance. Affordable Replacement Cost: Serious Value for Serious Drivers Even the best brake rotors are consumables. When you drive hard—especially at the track—your discs will eventually wear out. That’s why AP Racing designed their replacement iron rings to be cost-effective, allowing you to replace worn parts without breaking the bank. Compare that to constantly buying cheap $150 rotors every weekend—rotors that can't handle the heat and need to be swapped frequently. With AP Racing’s J Hook rotors, you get longer service intervals, less downtime, and better performance over time, making them an incredibly smart long-term investment. Proven on Track. Trusted by Champions. Top-tier racing teams rely on AP Racing J Hook rotors for one reason: they perform under pressure. Whether you're running time trials, attending HPDE events, or competing in wheel-to-wheel racing, these rotors offer professional-grade reliability, safety, and performance. Bedding and preparation of AP Racing J Hook Disc Properly preparing your new brake discs before heavy use is extremely important. The goal of bedding-in your brake pads and discs is to mate them together properly and prepare them for heavy use.  When prepared properly, or bed-in, your pads will transfer a thin layer of material to the disc face (transfer layer).  The pads in your caliper will then actually ride on that thin layer of pad material you’ve put down on the rotor, rather than rubbing directly on the iron rotor face.  A good transfer layer is going to give you superior brake pedal feel, less noise, superior pad wear, and lower the chances of cracking your discs. Important Notes- PLEASE READ! First, make sure you are on a closed course to perform a proper bed-in.  Do NOT perform the procedure on public roads.  You need a stretch of asphalt with long straights, good visibility, and no potential obstructions.  Make sure you are in a position to safely and repeatedly attain the necessary speeds to perform the bed-in procedure.  A controlled racetrack is the best place to perform this procedure.  AP Racing and Competition Motorsport in no way suggest or condone speeding on public roads or breaking the law in your car, nor do we take responsibility for any damage or injury that occurs as a result of using our product or these procedures.  You are performing the bed-in procedure at your own risk.  During these procedures, it’s critical that you never come to a complete stop with your foot on the brake pedal.  If you have brake ducts on your car, you may want to block them off to allow your brake system to heat up easily. The procedure outlined below is a generic procedure for most types of mild race pad.  Please check your pad manufacturer’s recommended bed-in procedure. Accelerate to approximately 60mph and then decelerate down to 5 mph.  If your car has ABS, you should try to hold the brakes at a point just before ABS intervention.  Once the car slows to 5mph, immediately accelerate back up to about 60mph, and brake again to roughly 5mph.  Repeat this series of stopping and accelerating 8 to 10 times.  Again, do not come to a complete stop with your foot on the brake pedal. Cool the brake system down by cruising at 45mph+ for 5 to 10 minutes. Visually inspect your discs.  They should be a blue/grey color (instead of shiny silver), and have an even layer of pad material across and around the entire rotor face. If the AP Racing rotors don’t have a layer of pad material on them, perform another series of stops in the manner outlined above.

Race Technologies RE10 Front Brake Pad - 2466.20.RE10 FITMENTS: BMW M2 G87 (2023+), front w/ iron rotors BMW M3 G82 (2021+), front w/ iron rotors BMW M4 G82 (2021+), front w/ iron rotors RE10 COMPOUND Race Technologies RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust. Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.

Motorola CM200D Digital/Analog Two-Way Radio The Motorola CM200D Digital/Analog Two-Way Radio offers clear and reliable driver communications for race teams needing the flexibility of both digital and analog communications capabilities. With a versatile 16 channels, a big bright, high-contrast display, up to 45W of power (VHF) and two user-programmable function buttons in its face, the Motorola CM200D gives you reliable race communications that have never been more clear. Motorola CM200D Digital/Analog Two-Way Radio Details: Manufacturer: Motorola Manufacturer part no.: RR-CM200DAD Channels: 16 Power: up to 45W VHF or 40W UHF Display: High-contrast digital Waterproof rating: IP54 Mounting bracket: Included Power wiring harness: Included IMSA car harness: Not included

Motorola CM300D Digital/Analog Two-Way Radio The Motorola CM300D is a reliable and versatile two-way radio that excels in race communications. Designed with durability and functionality in mind, this radio offers clear and crisp audio, ensuring effective communication between race officials, pit crews, and drivers. With its wide coverage range and strong signal strength, the CM300d allows seamless communication across the entire race track, even in challenging environments. Its compact size and intuitive controls make it easy to operate, enabling quick and efficient communication during fast-paced races. Whether it's relaying crucial information, coordinating strategy, or providing real-time updates, the Motorola CM300d is a trusted companion for race teams, enhancing safety and efficiency on the track. With 99 channels, four user-programmable function buttons accommodating eight features each (32 total!),  and a bright, high-contrast alphanumeric display, the Motorola CM300d Digital/Analog Two-Way Radio gives you excellent race communications that have never been more clear. Motorola CM300D Digital/Analog Two-Way Radio Details: Manufacturer: Motorola Number of channels: 99 Power: 1-25W (low), 25-40 (high) UHF Frequencies: 136-174 MHz (VHF), 403-470 MHz (UHF) Compliance: 12.5khz narrowband compliant Display: Alpha numerical Waterproof rating: IP54 Mounting bracket: Included Power wiring harness: Included MSA car harness: Not included Note: If your antenna lead terminates in a standard BNC connector, you will need a Motorola Adapter to connect it to the CM300D threaded antenna port.

Sparco Sprint Pro Race Suit The Sparco Sprint Pro race suit is the latest evolution of the legendary Sprint, redesigned to incorporate significant upgrades. The Sparco Sprint has always offered tremendous fire protection, style and value. The new two-layer construction is lighter and more breathable than the previous model. The Sprint Pro has pre-curved, fully-floating sleeves and multiple stretch panels throughout for better breathability, mobility and comfort. The Sparco Sprint Pro is designed as a classic mono-color suit with dynamic contrasting colors on the side. It is available in sizes EU46 to EU66. Sparco Sprint Pro Race Suit Details: SFI 3.2A/5 and FIA 8856-2018 approved Fully-floating sleeves Pre-curved arms Ultra-soft knit arm and leg cuffs (under the outer fabric on the boot cuff) Multiple stretch panels for comfort Available in standard or boot cuff

Sabelt Challenge TS-2 Racing Driver Suit Amazingly, the Sabelt Challenge TS-2 race suit is even lighter than its predecessor at only 360g/m2! The new Challenge TS-2 features a classic racing look with Sabelt's renowned high-quality tailoring. A lower neck collar, pre-curved arms, full-floating sleeves (for complete range of motion), and an anti-bubbling twill external layer are a few of the features you’ll enjoy in this Nomex fire-retardant driver suit. Hidden shoulder handles under the embroidered Sabelt logo (even that's fire retardant) make hanging and storing the Challenge TS-2 easier than ever. Available in sizes EU46 – EU66 (US36 - US56). Colors available are Black/White, Black/Yellow, Red, White, and Blue. If you have any questions on models or sizing, contact us at (844) 438-7244. Sabelt Challenge TS-2 Driver Suit Details: FIA 8856-2018 certified Fabric weight 360 g/m² Nomex fire-retardant, anti-bubbling external layer Low-profile collar Internal elastic waist band, outer waist belt External pockets EU sizes 46 to 66 (US 36 to 56)

Race Technologies RE10 Front Brake Pad - 2450.18.RE10 FITMENTS: Porsche 991.2 GT3, GT3RS, and GT2RS, Front w/ iron rotors Porsche 991 Turbo/Turbo S, Front w/ iron rotors Porsche 981/718 Cayman GT4, Front w/ iron rotors Race Technologies RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust. Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.

Pagid 8091 Racing Brake Pads Pagid 8091 Racing Brake Pad (16)mm Fits The Following Vehicles: Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 15 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 09 - 13 X Chevrolet Corvette C6 Brembo 6 piston non ceramic 09 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 15 - X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 07 - 10 X Ferrari 458 Italia [ceramic brakes] 10 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 16 - X Ferrari 599 GTB Fiorano 06 - 12 X Ferrari Several ceramic brakes CCM X McLaren 570S [ceramic brakes] 15 - X McLaren 650S / Spyder [ceramic brakes] 14 - 17 X McLaren 675LT [ceramic brakes] 15 - X McLaren MP4-12C [ceramic brakes] 11 - 14 X PAGID RSL 1 COMPOUND Pagid RSL 1 has a high ceramic content with superior thermal insulation and higher heat resistance than metallic pad compounds. They feature excellent pad wear under endurance conditions, excellent rotor life, and are less aggressive than RST pads with excellent brake balance and modulation. RSL 1E and RSL 1 are low metallic resin bonded materials containing steel and aramid fibers RSL 1E is perfect as front axle application for long endurance GT and touring car racing. with very high heat resistance. They maintain a constant friction level over a wide range of temperatures. Their reduced wear rate and disc friendliness make these materials appropriate for endurance races. RSL 1E is further improved in terms of pad life and modulation as well as friction stability at high temperatures and pad life. As a benefit, RSL 1E provides the lowest pad wear rate in the PAGID Racing portfolio for highly thermally loaded applications. PAGID Racing RSL compounds are developed to comply with the latest requirements in endurance racing and meet or surpass all current ecological standards of the automotive industry.   PAGID RSC1 COMPOUND RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage.  Race and track day compound for all known types of ceramic brake discs.   PAGID RSC2 COMPOUND RSC 2 is a low metallic resin bonded material a high content of fibers in the friction surface for sprint and endurance circuit racing. applications. Special race compound for ceramic discs with medium-high friction coefficient offering excellent fade resistance and long pad life.   PAGID RSC3 COMPOUND RSC 3 is a low metallic resin bonded material for sprint and endurance circuit racing. containing steel fibers. This material is specifically developed for above mentioned applications.  Special race compound for ceramic discs with low content of fibers in the friction surface.  High Friction coefficient with excellent fade resistance.  

A1-171 Girodisc Two-Piece 340mm Front Brake Rotors (Discontinued Design) FITMENT (FRONT): Audi S3 VW Golf R Discontinued New old stock rotor.  These have the straight grooves as images show, not the new curved grooves.  Final Sale, no returns or exchanges. Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. The Girodisc front rotors are approx. 20.3 lbs. vs. 23.8 lbs. for the stock VW/Audi units. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.