All

AiM Sportline AiM Sports Karting Accelerator-Brake Pedal Position Sensor - Magnetic $155.00

AiM Magnetic Pedal Position Sensor For MyChron The accelerator/brake pedal position sensors is a crucial support device for kart drivers. They provide a precise indication of timing and intensity of braking and/or acceleration. This permits the team to understand whether the driver has accelerated or braked at the right moment, with the correct pedal strength, across multiple laps and overlaid with other critical data. This is a very important factor in evaluating driver behavior and improving his/her performance. Data can be acquired by your MyChron connected to a MyChron Expansion and analyzed on your PC. Made from anodized aluminum, these sensors are very robust and water-resistant. Calibration is immediate: once installed, connect the sensors to your MyChron Expansion and get pedal positions (in high position and zero position). After that the sensor will start getting acceleration or braking data.

Lifeline Fire & Safety Systems Lifeline AFFF Hand Held Extinguisher from $154.99

The Perfect Affordable Extinguisher For HPDE Cars Ground Shipping Only. Pressurized bottles cannot be shipped via air. For HPDE participants, there simply is no better affordable fire extinguisher to protect your valuable sports car if things go sideways at the racetrack. AFFF (Aqueous Film Forming Foam) fire extinguishers are suitable for use on Class A (wood, paper, material & cloth) & Class B (flammable liquids: gasoline, spirits, diesel, etc.) fires. This dual Class A & B rating makes the Lifeline Foam (AFFF) Fire Extinguishers far superior for use in your HPDE car and trailer vs. the typical big-box store extinguisher. Lifeline AFFF Hand Held Extinguisher Details Comes complete with a mounting bracket and two quick-release straps for easy access Sturdy mounting bracket strong steel clamps keeps your extinguisher secure even in harsh, vibration-prone environments. Extinguishers are refillable and should be serviced every two years Bottle capacity: 1.75 liters or 2.40 liters Bottle diameter: 4.25 in. (108 mm) Not approved or intended for use as motorsports-sanctioned fire suppression systems

Pagid Pagid Racing Brake Pads No. 8077 (Rear) from $152.75

Pagid Racing Brake Pad Shape No. 8077 Fits the Following Vehicles: Make Model Build (Year) Front Rear Fiat Abarth 124 Spider 2016 - 20 X Fiat Abarth 124 Spider [Brembo brakes] 2016 - X Mazda MX-5 Miata NC 2006 - 15 X Mazda MX-5 Miata ND 2016 + X Mazda MX-5 Miata ND [Brembo brakes] 2016 + X Mazda MX-5 Miata Global Cup Car 2016 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid R01 Compound: A new Pagid compound, R01 is a flat medium-torque, high performance friction compound offering good modulation, control, and fade resistance. Suitable for medium temperature range applications such as high performance street driving, autocross, track days, Club Racing an Rally. Specifically designed for the Mazda MX-5 ND. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RS 44 Compound: The Pagid RS 44 (Orange) is a carbon-based, highly controllable pad with a progressive friction curve. It has a medium initial bite and good low temperature response. A very versatile pad for use on both front and rear axles, or in conjunction with RS14 on the front axle in FWD cars. Particularly popular in Porsche club racing, fitted as OEM on the Porsche 993 RS and GT2.

Performance Friction Corporation PFC Brake Pads 7754.11.16.44 $151.66

PFC 7754.11.16.44 Brake Pads - 11 Compound One of PFC's newest offerings, Performance Friction 7754.11.16.44 (11 Compound) Pad is a competition pad set that fits many popular AP Racing and Wilwood bridge-bolt calipers. PFC 7754.11.16.44 Brake Pads Details: Manufacturer: Performance Friction Manufacturer part number: 7754.11.16.44 Copmpound: 11 Street or Race: Race Material thickness of backing plate and pad material: 16mm Quantity in box: 4 pads PFC 11 Compound Details: 11 Compound is a new generation sprint and medium distance friction —the ultimate in control, with superior disc conditioning. 11 compounds were developed from the 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Brake with confidence—brake with ultimate control and modulation. For many applications, 11 will replace the venerable 01 compound. 11’s wear is par with PFC’s legendary 01 compound. Virtually zero taper wear when raced in a properly designed race caliper. Performance Friction PFC 7754.11.16.44 Racing Pad - 11 Compound Common Fitments: Manufacturer: Model: AP Racing SC100 Mark Williams 81100 82100 Outlaw 2800 Bridge Wilwood Dynalite w/ Bridgebolt NDL w/ Bridgebolt

Spiegler Performance Parts Spiegler Stainless Brake Lines - Porsche 991 GT3 Cup Car Front 2 Line Kit $150.00

Spiegler Stainless Brake Lines - Porsche Front 2 Line Kit Fitments include 991 GT3 Cup Car Front Spiegler 100% stainless front brake lines for the Porsche 991 GT3 Cup Car. WHY SPIEGLER, AND NOT BRAND X?While we're not the first to create a six line kit, we have created the best one. The quality of the Spiegler components is a cut above the competition in all regards, and you can see the superior precision of the components in the pics below. Spiegler uses 100% stainless steel fittings machined from billet, and all fittings are attached with Spiegler's exclusive stress-free torsion system. That means the lines can be twisted or turned 360 degrees after they've been attached without placing any stress on the line or fitting. The components for Spiegler lines are imported from Switzerland, and the lines are assembled and tested in Dayton Ohio. The result is a brake line of unparalleled strength, durability, and reliability. For less than the price of a set of brake pads you can have the added convenience, feel, and confidence that Essex and Spiegler bring to the table. Features All components manufactured in USA and Europe Stress-free Torsion Fitting System. Abrasion resistant coating/sheath Aircraft quality stainless steel fittings and bolts. Heavy gauge, tightly woven stainless steel braid Stringent and consistent quality control Du Pont PTFE- Teflon® lining DOT compliant Full testing battery on all parts, with lifetime warranty Benefits Allows 360 degree rotation of banjo fitting for correct alignment and strain reduction Eliminates snagging and chafing Superior strength, longevity, and safety Eliminates line swell, more consistent feel Reduces line expansion and provides greater durability Quality assurance, road legal Allows for personalization Purchase and drive with confidence

Spiegler Performance Parts Spiegler Stainless Brake Lines - Porsche Rear 2 Line Kit $150.00

Spiegler Stainless Brake Lines - Porsche Rear 2 Line Kit Fitments include 992 GT3 / GT3RS Spiegler 100% stainless rear brake lines for the Porsche 992 GT3. WHY SPIEGLER, AND NOT BRAND X?While we're not the first to create a six line kit, we have created the best one. The quality of the Spiegler components is a cut above the competition in all regards, and you can see the superior precision of the components in the pics below. Spiegler uses 100% stainless steel fittings machined from billet, and all fittings are attached with Spiegler's exclusive stress-free torsion system. That means the lines can be twisted or turned 360 degrees after they've been attached without placing any stress on the line or fitting. The components for Spiegler lines are imported from Switzerland, and the lines are assembled and tested in Dayton Ohio. The result is a brake line of unparalleled strength, durability, and reliability. For less than the price of a set of brake pads you can have the added convenience, feel, and confidence that Essex and Spiegler bring to the table. Features All components manufactured in USA and Europe Stress-free Torsion Fitting System. Abrasion resistant coating/sheath Aircraft quality stainless steel fittings and bolts. Heavy gauge, tightly woven stainless steel braid Stringent and consistent quality control Du Pont PTFE- Teflon® lining DOT compliant Full testing battery on all parts, with lifetime warranty Benefits Allows 360 degree rotation of banjo fitting for correct alignment and strain reduction Eliminates snagging and chafing Superior strength, longevity, and safety Eliminates line swell, more consistent feel Reduces line expansion and provides greater durability Quality assurance, road legal Allows for personalization Purchase and drive with confidence

Diversified Electronics, Inc. Motorola to IMSA Helmet Cable with Built-In Push To Talk (PTT) $150.00

Motorola to IMSA Helmet Cable with Built-In Push To Talk (PTT) Racing Radios Motorola adapter cable that lets you plug directly into your Motorola hand held radio's two pronged connection to your IMSA helmet kit. Using the built in Push To Talk (PTT) you can also use this cable as an emergency car harness. It is shorter, but will work perfectly. Motorola to IMSA Helmet Cable with Built-In Push To Talk (PTT) Details: Manufacturer: Racing Radios Manufacturer part number: RHA-950 Connection 1: Motorola 2 prong male Connection 2: IMSA female Coli cord: Yes Weatherproof: Yes Momentary PTT: Yes Who would use this cable? Anyone who would like to communicate with their team captain, crew or other driver while fully suited. You will see this cable used with the driver getting into the car to get the final vehicle health updates before going out for their stint. The Motorola to IMSA Helmet Cable with Built-In Push To Talk (PTT) is a great track side item used by pros and amateur drivers alike. If You have a Motorolla 2 pin handheld radio and want to connect to your wired helmet, this is the adapter harness. Simply connect your IMSA (4C) cable from your helmet into the Racing Radios RHA-950 and have perfect communication. The built in PTT (push to talk) button mounted on the belt clip allows for easy transmit control. If your helmet cord is short, non-coiled, or other than IMSA 4C you may need an adapter or extension cable.

Spiegler Performance Parts Spiegler Stainless Brake Lines - Porsche Front 2 Line Kit $150.00

Spiegler Stainless Brake Lines - Porsche Front 2 Line Kit Fitments include 992 GT3 / GT3RS Spiegler 100% stainless front brake lines for the Porsche 992 GT3. WHY SPIEGLER, AND NOT BRAND X?While we're not the first to create a six line kit, we have created the best one. The quality of the Spiegler components is a cut above the competition in all regards, and you can see the superior precision of the components in the pics below. Spiegler uses 100% stainless steel fittings machined from billet, and all fittings are attached with Spiegler's exclusive stress-free torsion system. That means the lines can be twisted or turned 360 degrees after they've been attached without placing any stress on the line or fitting. The components for Spiegler lines are imported from Switzerland, and the lines are assembled and tested in Dayton Ohio. The result is a brake line of unparalleled strength, durability, and reliability. For less than the price of a set of brake pads you can have the added convenience, feel, and confidence that Essex and Spiegler bring to the table. Features All components manufactured in USA and Europe Stress-free Torsion Fitting System. Abrasion resistant coating/sheath Aircraft quality stainless steel fittings and bolts. Heavy gauge, tightly woven stainless steel braid Stringent and consistent quality control Du Pont PTFE- Teflon® lining DOT compliant Full testing battery on all parts, with lifetime warranty Benefits Allows 360 degree rotation of banjo fitting for correct alignment and strain reduction Eliminates snagging and chafing Superior strength, longevity, and safety Eliminates line swell, more consistent feel Reduces line expansion and provides greater durability Quality assurance, road legal Allows for personalization Purchase and drive with confidence

-25% sale

Alpinestars ZX EVO v2 Fireproof Shirt - Competition Motorsport

Alpinestars Alpinestars ZX EVO v2 Fireproof Shirt $150.00 $199.95

Alpinestars ZX EVO v2 Nomex Underlayer Shirt Alpinestars ZX Series EVO v2 layers are constructed with Lenzing FR®, an innovative natural viscose fiber that affords exceptional flame resistance and protection against heat transfer. This Formula 1 specification underwear is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a driving suit. ALPINESTARS ZX EVO V2 NOMEX SHIRT TOP PROTECTION Certified to the new FIA 8856-2018 homologation standard. ALPINESTARS ZX EVO V2 NOMEX SHIRT TOP CONSTRUCTION Stretchable construction under new homologation standard requirements Lightweight, seamless tubular construction for optimum comfort ALPINESTARS ZX EVO V2 NOMEX SHIRT TOP KEY FEATURES Fabric composition with a high percentage of Lenzing FR® fiber for enhanced garment performance Jaquard motif with Alpinestars knee logo for a unique design

Sparco S.p.A. Sparco QRT-R Side Mount Brackets (600QRT) from $150.00

Sparco QRT-R Side Mount Seat Brackets Sparco QRT-R side mounts are specifically designed for the QRT-R and other QRT performance seats. These QRT side mounts are designed for the unique bottom shape of QRT seats. Multiple side holes allow your QRT seat to be mounted low in the vehicle and with the proper amount of recline or rake. Available in black. Sparco QRT-R Side Mount Details Manufacturer: Sparco Manufacturer part no.: 600QRT, 600QRTAL Material: steel or aluminum Weight: 6.5 lbs per set (steel), 3.2 lbs per set (aluminum) Designed for unique QRT bottom shell shape Allows for low mounting in vehicle and proper recline or rake

Sparco S.p.A. Sparco Side Mount Brackets: Aluminum (600W) $150.00

Sparco Aluminum Side Mount Seat Brackets Sparco Aluminum side mounts lightweight and strong, used to mount Sparco competition seats in your vehicle. These Sparco side mounts have multiple side holes, making it easy to find a safe and comfortable mounting position. Sparco 600W Aluminum Side Mount Seat Bracket Details Manufacturer: Sparco Manufacturer part no.: 600W Material: aluminum Finish: black powder coating Weight: 2.5 lbs. (set of two mounts)

Sold out

Sabelt aluminum racing seat side mounts Standard Length

Sabelt S.p.A. Sabelt Aluminum Side Mount Brackets from $150.00

Aluminum Racing Seat Brackets by Sabelt Laser cut from high-strength aluminum, these lightweight seat brackets are ideal for mounting most side-mount style racing seats. Sabelt Aluminum Side Mount Bracket Details Manufacturer: Sabelt Material: 5mm thick aluminum Homologation: FIA compliant Finish: powder coated black Standard version: 15.5" length Extended version: 19.25" length

Stilo S.r.l. STILO ST5 CHEEK PADS W/USAFLAG $149.95

Stilo ST5 CHEEK PADS With USA FLAG Elevate your racing experience with the Stilo ST5 Cheek Pads, now featuring a patriotic touch with the American flag embroidered into each pad. Designed to offer unparalleled comfort and personalized fit, these cheek pads allow drivers to tailor their helmet for optimal performance on the track. Available in a range of thicknesses including 20mm, 25mm, 30mm, 33mm, and 35mm, these cheek pads provide the flexibility to accommodate different head shapes and comfort preferences. Whether you're aiming for a snug fit or a bit more room to maneuver, our cheek pads ensure maximum comfort and stability during every race. To ensure the best fitting experience, we highly recommend visiting one of our authorized Stilo dealers. Our expert staff will assist you in selecting the appropriate cheek pad size to complement your helmet size and enhance your overall racing experience. It's important to note that Stilo helmets are known for their snug fit, and our cheek pads offer the added benefit of adjustability even after purchasing your helmet. With the American flag embroidered into each pad, you can showcase your patriotism while enjoying customized comfort and performance on the track.

Bell Racing Helmets Bell HP77 Guanyu Zhou 1:2 Scale F1 Mini Helmet | Kick Sauber 2024 F1 Season $149.95

Bell HP77 Guanyu Zhou 1:2 Mini Helmet Kick Sauber 2024 Formula One Season Bell has teamed up with Formula 1 driver Guanyu Zhou to create this 1:2 scale replica special edition Mini Helmet featuring Guanyu Zhou's amazing helmet graphics with Kick Sauber for the 2024 F1 season. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of Zhou's original helmet. Guanyu worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Guanyu Zhou with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Bell Kevin Magnussen Haas F1 2024 Mini Helmet – 1:2 scale collectible

Bell Racing Helmets Bell HP77 Kevin Magnussen 1:2 Scale F1 Mini Helmet | Haas 2024 F1 Season $149.95

Bell HP77 2024 Kevin Magnussen 1:2 Mini Helmet Bell teamed up with Formula 1 driver Kevin Magnussen to create this 1:2 scale replica special edition Mini Helmet featuring Kevin Magnussen and Haas livery for the 2024 Formula 1 season. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of Kevin's original helmet. In fact, Magnussen worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Kevin Magnussen and Haas with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Bell Mini Helmet 2024 4100311 Esteban Ocon Left Three-Quarters 3Q Image

Bell Racing Helmets Bell HP77 Esteban Ocon 1:2 Scale F1 Mini Helmet | Alpine 2024 F1 Season $149.95

Bell HP77 2024 Esteban Ocon 1:2 Mini Helmet Bell has teamed up with Formula 1 driver Esteban Ocon to create this 1:2 scale replica special edition Mini Helmet featuring Esteban Ocon's helmet livery with BWT Alpine Racing for the 2024 F1 season. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of his original helmet. Esteban worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Esteban Ocon with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.