All

Molecule Matte Helmet Detailer MSHMD41 Image

Molecule Molecule Matte Helmet Detailer $8.95

Molecule Matte Helmet Detailer Spray Molecule Matte Helmet Detailer cleans and details matte ﬁnish helmets in one easy step. Speciﬁcally formulated to keep the low luster of matte helmets intact and maintain a uniform flat finish. Cleans and details matte finish helmets in one easy step Safely removes bugs, oils, dirt and grime Apply and allow to dry sku: MSHMD41

Porsche Alignment Camber Shims - Competition Motorsport

Competition Motorsport Porsche Alignment Camber Shims from $8.95

Anodized Aluminum Porsche GT3 Control Arm Shims Porsche GT3 And Similar Two-Piece Lower Control Arms Precision laser-cut from 6061-T6 aluminum and anodized for durability, these shims are used to adjust camber by changing length of your Porsche OEM or similarly configured lower control arm (such as these RSS units). Thickness in millimeters is silk screened on each shim for easy sorting. One degree of negative camber is approximately a 5mm shim. Competition Motorsport Shims Available in the Following Sizes: 1 mm 3 mm 5 mm Package Savings: Enthusiast (two of each shim) save 10% Racer (four of each shim) save 15% Team (eight of each shim) save 20% These fit all two-piece Porsche lower control arms (except 991 GT3/GT3RS rear and 992 front and rear, which use a different shim shape). Shims are priced individually (other than packages). They are typically used in pairs or in multiple-shim combinations. Also fits 981 and 718 Cayman models. Competition Motorsport Performance shims are used on FRONT and REAR of any Porsche 986/987/996/997 fitted with two-piece lower control arms (commonly referred to as "GT3" control arms) and ONLY FRONT of 991s with two-piece lower control arms.

Paragon Paragon Everlast Ice $6.99

Paragon Everlast Ice Paragon’s Everlast Ice allows for longer cooling periods when added to ice and water in any Paragon cooler or Paragon cooler bag. Paragon Everlast Ice should be kept in a freezer until you're ready to use it. Compatible with non-Paragon coolers. Paragon Everlast Ice is the perfect solution for keeping the water in your Paragon Viking cooler ice-cold at the track. No more running to the store for more ice! Paragon Everlast Ice Details Manufacturer: Paragon Weight: 1 lb. Reusable and economical Leakproof, non-toxic gel Long lasting cold Efficient transfer of energy

Cambox Cambox Ultra Grip Velcro Helmet Fasteners from $6.00

Cambox Ultra Grip Velcro Helmet Fasteners Compatible with all Cambox camera models, these are the same Ultra Grip fasteners that came with your Cambox camera. They make it super-easy to move your Cambox camera from one helmet to another. The Cambox Ultra Grip Velcro Fasteners come in singles or packs of five or ten. The strong adhesive keeps your Cambox camera securely in place. Not for temporary use.

Sold out

Competition Motorsport Decals (4-pack) - Competition Motorsport

Competition Motorsport Competition Motorsport Decals (4-pack) from $6.00

Competition Motorsport Decals (pack of 4 in the size selected) Sizes Available: 6"x1.5" / 9"x2" / 12"x3" Show your support for Competition Motorsport and grab some high-quality, fade-resistant Competition Motorsport decals. They're perfect for cars, trucks, trailers, laptops, and the walls at Siebkens (if you don't understand this joke, you owe it to yourself to go to Elkhart Lake and enjoy a steak sandwich at Siebkins while reading the walls for a while).

Racing Radios Racing Radio Velcro Earpiece Mount Tab Kit $3.00

Racing Radio Earpiece Mount Tab Kit Racing Radio Earpiece Mount Tab Kit uses a hourglass shaped tab to wrap around your earbud jack that secures to a matching tab (included) that you mount inside your helmet against the inside shell. This kit allows for securely mounting your Racing Radios ear bud jack to your helmet with no drilling. Racing Radio Earpiece Mount Tab Kit Details: Manufacturer: Racing Radios Manufacturer part number: VELCRO-TAB

CMS Transponder Decal - Competition Motorsport

Competition Motorsport CMS Transponder Decal $2.99

CMS Transponder Decal with Write-On Area Some sanctioning bodies require this decal to mark the location of your transponder. Our 3 inch diameter red-on-white "T" decal has a special area for you to write in your transponder number, if desired. Just write your transponder number using a ball point pen or Sharpie and you're good to go. Make sure the ink is waterproof if the decal will be exposed to the elements. If in doubt, we suggest you protect the write-on area with clear tape to keep the transponder number from smearing or washing away. 3" diameter Die-cut vinyl decal

Competition Motorsport CMS Tow Decal $2.99

CMS Tow Decal All professional sanctioning bodies require tow hooks on race cars if the roll cage is not easily accessible, and the tow hooks must be clearly marked for quick identification by safety crews. 3" by 2" Die-cut vinyl decal

CMS Fire Extinguisher Decal - Competition Motorsport

Competition Motorsport CMS Fire Extinguisher Decal $2.99

CMS Fire Extinguisher Decal Our CMS Fire Extinguisher Decal meets the standards of NASA, SCCA and IMSA for marking your fire system actuator location. 3" diameter Die-cut vinyl decal

Competition Motorsport CMS Master "OFF" Decal $2.99

CMS Master "OFF" Decal Our CMS Master "OFF" Decal meets the standards of NASA, SCCA and IMSA for the "international marking of a spark in a blue triangle" to mark your vehicle's kill switch location. 3.375" by 2" wide Die-cut vinyl decal

Sabelt GT-AM Pad Set: NO PRICE SOLD ONLY WITH SEAT $0.00

Sabelt GT-AM Racing Seat Pad Set PAD SET ONLY One of the many great things about the Sabelt GT-AM Racing Seat is the ability to install customized pad kits. This lets you tailor the look and fit of your Sabelt GT-AM to your individual needs by utilizing different size pads. Choose between Medium, Large or Extra Large pads to get a great-fitting and great-looking racing seat! One pad kit weighs about 3.5 lbs (1.7 kg).

Sabelt GT-Pad Pad Set: NO PRICE SOLD ONLY WITH SEAT $0.00

Sabelt GT-Pad Racing Seat Pad Set PAD SET ONLY One pad kit weighs about 3.5 lbs (1.7 kg).

INTERNAL: AiM Solo 2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) - Competition Motorsport

AiM Sports INTERNAL: AiM Solo 2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) $0.00

AiM Solo 2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) Moving your Solo2 DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo DL into an older vehicle and need a power supply cable, use this and use only the + and - wires and fold back the can inputs. The AiM V02569050 harness connects your Solo 2 DL to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector to fit the Solo 2 DL, and the other has 6 non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground). Does not fit original AiM Solo DL. AiM Solo2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) Details: Manufacturer: AiM Manufacturer part number: V02589050 Fits Solo DL: No Fits Solo 2 DL: Yes Fits Solo Base Model: No Fits Solo 2 Base Model: No Pins on AiM Solo DL Side: 7 Pin Thread on connector Vehicle Chassis Ends: 6 Non terminated wires Vehicle Chassis Ends Break Out: Red=12VDC, Black=Ground, Blue=ECU RS232TX, Blue=ECU RS232 CAN-, Gray ECU RS232 RX, Gray CAN+ AiM Solo 2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) Wiring Codes: Red: 9-15VDC Black: Ground Grey: CAN+ Blue: CAN- Black: ECU RS232 RX Blue: ECU RS232TX Both blue wires are the same color, but each wire has an identifier tag stating the connection type

INTERNAL: AiM Solo 2 DL to OBD-II Connector (new Solo 2 DL) - Competition Motorsport

AiM Sports INTERNAL: AiM Solo 2 DL to OBD-II Connector (new Solo 2 DL) $0.00

AiM CAN 7-Pin to OBD-II (K-Line Connector) Cable for Solo 2 DL AiM Solo 2 DL to OBD-II Port Connection Cable On Your Car For Easy Addition of RPM and other vehicle data. One end has the K-Line (OBD-2) plug to fit the diagnostic port, and the other end has a 7-pin 712 (screw-in) connector for the Solo 2 DL. OBD-II is also known as K-Line This is the same cable supplied with the original AiM Solo 2 DL for OBD-II. Does not fit the original Solo DL. AiM CAN 7-Pin to OBD-II (K-Line Connector) Cable for Solo 2 DL Details: Manufacturer: AiM Manufacturer part number: V02589040 End 1: AiM 7 Pin 712 (thread on) End 2: OBD-2 (K-Line) Fits AiM Solo: No Fits AiM Solo DL: No Fits AiM Solo 2: No Fits AiM Solo 2 DL: Yes

INTERNAL: AiM Solo 2 & Solo 2 DL RPM and Power Wiring Harness - Competition Motorsport

AiM Sports Solo 2 DL RPM and Power Wiring Harness $0.00

AiM Solo 2 & Solo 2 DL Vehicle Power Wiring Harness Now you can power your AiM Solo 2 and Solo 2 DL for your entire endurance race without the need to charge the battery. The power cable that comes with the AiM Solo 2 in the package is set up for a cigarette lighter connection, but this is a hard wire connection for true race cars. This harness connects your AiM Solo 2 DL to your vehicle's fuse box wiring. One end has a 5-pin 712 (screw-in) connector to fit the Solo, and the other has 2 non-terminated wires (Power and Ground). Solo 2 DL Vehicle Power Wiring Harness Details: Manufacturer: Aim Manufacturer part number: V02589020 Fits Solo DL: No Fits Solo 2 DL: Yes Pins on AiM Solo Side: 5 Pin Thread on connector Vehicle Chassis Ends: 2 Non terminated wires Vehicle Chassis Ends Break Out: Power, and Ground If you are putting a Solo2 into an older vehicle and need a direct to battery/fuse box power supply cable, use this harness for an easy install.

Sabelt GT-Spine Pad Set: NO PRICE SOLD ONLY WITH SEAT $0.00

Sabelt GT-Spine Racing Seat Pad Set PAD SET ONLY One of the many great things about the Sabelt GT-Spine Racing Seat is the ability to install customized pad kits. This lets you tailor the look and fit of your Sabelt GT-Spine to your individual needs by utilizing different size pads. Choose between Medium, Large or Extra Large pads to get a great-fitting and great-looking racing seat! One pad kit weighs about 3.5 lbs (1.7 kg). This is the pad set only. Sabelt GT-Spine Racing Seat sold separately.