Racing Brake Pads

Pagid Racing Brake Pad Shape No. 8021 Fits the Following Vehicles: Make Model Build (Year) Front Rear BMW 1 Series M Coupe [E82] 2011 - 13 X BMW M3 [E90 / E92] 2007 - 13 X BMW M5 [E60] 2004 - 11 X BMW M6 [E63 / E64] 2006 - 12 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 4 Compound: RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Pagid Racing Brake Pad Shape No. 4349 Fits the Following Vehicles: Make Model Build (Year) Front Rear Caterham SP/300.R 2012 - X X Lotus Exige V6 Sport 360 Cup 2015 - X Lotus Exige Sport Cup 2006 - X Fits the Following Caliper: Make Type Remarks Shape No. AP Racing CP7600 D46 14.4mm,16mm 4349, 8076 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2 Compound The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pad Shape No. 1203 Fits the Following Vehicles: Make Model Build (Year) Front Rear Ferrari 348 GTB. GTS, Spider 89 - 94 X X Ferrari 355 Berlinetta. GTS 94 - 99 X X Ferrari 456 GT 94 - 96 X Ferrari 512 Testarossa 92 - 96 X Ferrari 575M Maranello 02 - 06 X Ferrari F512M & 550 X Maserati Spyder 4.2 & Coupe 3.2 02 - 07 X Porsche 911 3.3 SC Turbo / Turbo S 77 - 90 X X Porsche 928 5.4 GTS 32V 91 - 95 X Porsche 928 S & S4 & GT 85 - 95 X Porsche 944 2.5 Turbo 87 - 91 X Porsche 944 2.7 & 3.0 S2 88 - 91 X X Porsche 964 3.3 Turbo & Turbo S 88 - 91 X Porsche 964 3.3/3.6 Turbo & Turbo S 91 - 93 X Porsche 964 3.6 C4 88 - 94 X X Porsche 964 3.6 Carrera RS 91 - 93 X Porsche 964 C2 3.6 91 - 94 X X Porsche 968 3.0 Coupe 91 - 95 X X Porsche 968 3.0 Coupe Sport 91 - 95 X Porsche 968 3.0 Coupe Turbo S 93 - 95 X Porsche 993 3.6 Carrera & C4 93 - 97 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. RS 44 Compound: The Pagid RS 44 (Orange) is a carbon-based, highly controllable pad with a progressive friction curve. It has a medium initial bite and good low temperature response. A very versatile pad for use on both front and rear axles, or in conjunction with RS14 on the front axle in FWD cars. Particularly popular in Porsche club racing, fitted as OEM on the Porsche 993 RS and GT2. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 4 Compound: RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Pagid Racing Brake Pad Shape No. 2206 Fits the Following Calipers: Make Type Remarks Shape No. AP Racing CP8250 D51 20mm 2206 USA StopTech ST43 wide annulus 20mm 2206 USA Wilwood Superlite bridge bolt D51 20mm 2206 USA Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

PFC 5001.332.15.44 Rear Brake Pads Fits the Following Cars (Rear Axle): Make Model Year Notes Toyota Corolla GR 2023 - 2025 Rear Toyota Yaris GR Sport with red calipers only 2020 - 2025 Rear Race-Ready, High-Performance Brake Pads Performance Friction Corporation (PFC) Brake Pads 5001.332.15.44 deliver unmatched stopping power, precision control, and proven durability for sports car racing. Engineered with over 35 years of friction expertise, these premium brake pads are built to perform at the highest levels of motorsport competition. Each PFC brake pad is manufactured using proprietary friction materials and a zero-compromise design process to ensure consistent, fade-free braking under extreme track conditions. All PFC pad compounds are “Race Ready,” offering a fast and easy bed-in process with rotors for immediate performance gains. Trusted by Championship Teams Worldwide PFC Brake Pads are trusted by professional drivers and racing teams competing in some of the world’s most demanding series, including: NTT IndyCar Series IMSA Continental Tire SportsCar Challenge Porsche Cup Racing Pirelli World Challenge ...and many more! Why Choose PFC Brake Pads 5001.332.15.44? High-performance, race-proven friction materials Consistent pedal feel and fade resistance Quick, reliable burnishing with minimal downtime Used by winning teams with More Championships than Any Other™ When it comes to professional-grade racing brakes, PFC Brake Pads 5001.332.15.44 are the performance upgrade your car needs. Join the global community of champions who trust PFC for faster laps, better control, and superior stopping power. PFC 332 Compound 332 has been formulated with lower bite and torque for rear applications. With smooth release, the 332 offers excellent stability and control. The 332 has been designed to work with ABS applications, and has exceptionally low wear rates.

Performance Friction PFC Brake Pads 0548.XX.16.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the sports car market, we know they are quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs. The PFC 0548.11.16.44 and PFC 0548.08.18.44 have dominated the NASA Spec E46 class since its inception. The PFC 0548 pad shape fits the rear axle of the E46 (non-M) chassis and comes in three popular compounds: 08, 11, and brand new 332. PFC 332 Compound 332 has been formulated with lower bite and torque for rear applications. With smooth release, the 332 offers excellent stability and control. The 332 has been designed to work with ABS applications, and has exceptionally low wear rates. PFC 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. This PFC 0548 Pad Shape Fits the Following Cars (Rear): BMW 7 Series 1994-01 E38 BMW 8 Series 1994+ E31 BMW 330Cd / 330Ci 2003+ E46 BMW 330d / 330Xd 2000-06 E46 BMW 330i 2000-06 E46 BMW M3 2000-06 E46 BMW M3 CSL 2000-06 E46  BMW M5 1998-03 E39 BMW X3 2004+ E83 BMW X5 2000+ E53 BMW Z4M 2006+ E85 M Roadster & Coupé BMW Z8 2000+  

Pagid Racing Brake Pad Shape No. 8010 Fits The Following Vehicles: Make Model Build (Year) Front Rear Honda Civic Type R/ S2000/RSX 1999 - 2005 X Honda S2000 (AP1 & AP2) 1999 - 2009 X Acura RSX/RSX Type S 2002 - 06 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.

Pagid Racing Brake Pad Shape No. 8069 Fits the Following Vehicles: Make Model Build (Year) Front Rear Mitsubishi Lancer Evo X 2007 - 16 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo hp 2 piston 84.7x70 17mm 8069 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RS 42 Compound: RS 42 is a low metallic resin bonded material containing steel and aramid fibers. The characteristics make this material appropriate for small formula cars. Pagid RS 42 is regarded as a classic rally racing brake pad compound, as well as being very popular in small formula and touring cars.

Carbotech CT991B Performance & Racing Brake Pads 17.5mm Cobalt CT991B Fits The Following Vehicles:   Porsche 997 GT3 Cup Car  (2006-2012) Porsche 996 GT3 Cup Car (2000-2005) Porsche 997 Turbo (2007-2012 Porsche 997 GT3/GT3RS/GT2/GT2RS (2007-2012) Porsche Carrera GT Front and Rear Pads Precision braking starts here. The Carbotech CT991B brake pads offer world-class stopping power across a range of compounds engineered for HPDE, club racing, time trials, and daily driving. Whether you're shaving tenths at a national event or building consistency during weekend track days, there's a Carbotech compound tailored to your performance goals. Manufactured in the USA using Carbotech’s proprietary ceramic and metallic formulations, these pads deliver unmatched modulation, rotor friendliness, and fade resistance. Friction materials have evolved significantly over the years. Brake pads were originally made with organic ingredients such as asbestos and carbon, held together by a strong resin. Most brake pads sold today are considered semi-metallic, semi-metallic brake pads use brass, copper, and steel wool shavings held together by a resin. Unfortunately, the main drawback about the use of steel strands, iron, graphite, and small amounts of filer and friction modifiers (used to provide strength and conduct heat away from the rotors) is that the metal shavings and iron must rub against steel rotors every time the brakes are applied. This generates more noise and is a lot more abrasive on the rotors. It also creates corrosive dust that can damage your braking system as well as the paint on your wheels and car. Friction materials that contain Ceramic Kevlar formulations have become recognized for their desirable blend of traits. This allows the Ceramic Kevlar pads to handle higher brake temperatures with less heat fade, and provide faster recovery after heavy braking. It also reduces brake dust and makes wheel maintenance easier! Ceramic Kevlar compounds extend brake life compared to most other semi-metallic and organic materials, and at the same time they outlast other premium pad materials by a significant margin, without compromising in noise control, pad life, and all around braking performance. The CT991B shape fits a variety of high-performance applications, making it a go-to solution for drivers looking for track day brake pads that match their skill level and intensity. Carbotech CT991B Brake Pad Highlights Multiple compounds available to match driving style and track conditions Fade-resistant ceramic-metallic formulations designed for extreme temperature stability Rotor-friendly design ensures longer disc life and reduced operating costs Made in the USA with race-proven quality and compound development Perfect for HPDE, time trials, autocross, club racing, and pro-level motorsports Available Compounds for the Carbotech CT991B Brake pad 1521: street compound designed for spirited street driving. Low dust and quiet operation with high initial bite.  1521 friction coefficient rated at 0.47. AX6: Autocross-focused compound offering more initial bite than 1521. Great for Solo and light-duty track use where cold bite matters. AX6 friction coefficient rated at 0.50. RP2: Ideal for racers seeking durability and rotor life in endurance club racing. Very low wear rates and excellent release characteristics. RP2 friction coefficient rated at 0.50. XP8: Entry-level race compound perfect for advanced HPDE and club racing. Consistent torque and excellent modulation under high heat. XP8 friction coefficient is rated at 0.56. XP10: Mid-tier race pad with higher bite and fade resistance than XP8. Excellent for time trials, wheel-to-wheel racing, and aggressive HPDE. XP10 friction coefficient is rated at 0.60. XP12: Designed for heavier cars or high-speed tracks. High torque levels and consistent performance across wide temperature ranges. XP12 friction coefficient is rated at 0.65. XP20: Ultra-high torque and friction. For drivers who demand maximum stopping power in pro-level racing environments.  XP20 friction coefficient rated at 0.68. XP24: Highest friction compound in the Carbotech lineup. Built for pro racing applications requiring peak performance and extreme heat tolerance. XP24 friction coefficient rated at 0.70. Carbotech 1521 The Carbotech™ 1521™ is a high-performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a low dust and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for track use. Carbotech AX6 The AX6™ is specifically engineered for Autocross applications. A high-torque brake compound delivering reliable and consistent performance over a wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. NOT FOR STREET USE! Carbotech RP2 The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has a strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. NOT FOR STREET USE! Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is their first racing compound. It provides good initial bite at race temperatures, high coefficient of friction, excellent modulation, and release characteristics. XP8™ offers extremely high fade resistance and is very rotor friendly. It's perfect for track day use with any tire.  NOT FOR STREET USE! Carbotech XP10 When Carbotech™ unleashed the XP10™ it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly-praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. NOT FOR STREET USE! Carbotech XP12 Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has a temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™ but compared to the competition the XP12™ is still very rotor friendly. NOT FOR STREET USE! Carbotech XP20 XP20™ is the latest iteration of the highly successful XP™ series of compounds.  With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is a major step in a progression of the XP™ series of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful.  NOT FOR STREET USE! Carbotech XP24 XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with an open wheel, closed wheel, sprint, and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). NOT FOR STREET USE! Carbotech CT1741 Frequently Asked Questions (FAQ) 1. Which Carbotech compound is best for daily driving? 1521 is ideal for spirited street use with minimal dust and noise.. 2. What’s the best compound for beginner HPDE drivers? XP8 is a great starting point for advanced HPDE, offering strong bite and fade resistance without being overly aggressive. 3. Can I mix Carbotech compounds front and rear? Yes, many drivers use a more aggressive compound in the front (e.g., XP12) and a slightly less aggressive one in the rear (e.g., XP10) to fine-tune balance. 4. Are Carbotech pads hard on rotors? No. All Carbotech compounds are known for being rotor-friendly, helping reduce rotor wear and operating costs. 5. Which compound is best for endurance racing? RP2 is engineered specifically for long-distance events where pad and rotor life are just as important as torque output. 6. Do Carbotech pads require special bedding procedures? Yes. A proper bedding-in process is critical for optimal performance. Carbotech provides detailed bedding instructions with every set of pads. Carbotech Brake Pad Bedding Procedures The bedding process transfers friction material from the pads into the pores of the brake rotor. It also matches the microscopic contours of the pads and rotors to increase surface contact. Proper bedding of pads & rotors will result in greater performance, longer pad life & less rotor wear. Failure to properly bed in your pads could lead to friction materials chunking and breaking up. This could also lead to overheating your pads and causing them to glaze over resulting in the car not being able to stop or slow fast enough. All new brake pads require a bedding process. The proper way to bed your brake pads and brake discs (rotors) is to bed them on the racetrack, NOT on the street. Start this process by pumping your brakes a few times to assure proper installation. Once on track perform several moderate (medium) near stops (to a very slow rolling speed) to thoroughly warm up the pads and rotors. This should take 1-2 laps. This allows a thin layer of the pad material to be transferred into the micro-grooves of the rotor. After the pads/rotors are warm, perform a series of hard near stops (to a slow rolling speed) until some brake fade is felt. This process should take about 2-4 laps (depending on the track). Once this occurs, then stay off the brakes (as much as possible) and bring your car into the pits/paddock to completely cool. Do not lock the tires during this operation. Allow brake pads and/or rotors cool down to ambient temperatures; no less than 30 minutes. The total bedding procedure should not take more than 5-6 laps or about 10-15 minutes. Failure to properly bed in your pads could cause friction material to chunk and break up resulting in poor pad performance and pad life. Improper bedding can also lead to overheating your pads and causing them to glaze over, resulting in the car not being able to stop or slow properly.

Pagid Racing Brake Pads No. 1285 Fits the Following Vehicles Make Model Build (Year) Front Rear BMW 318is - 325i [E36] 90 - 98 X BMW 320i - 325i [E46] 98 - 05 X BMW M3 [E30] EVO I & II 86 - 92 X BMW M3 [E36] 3.0 & 3.2 92 - 99 X BMW M5 [E34] 88 - 97 X BMW Z1 88 - 91 X BMW Z3 M Coupe [E36] 98 - 03 X BMW Z3 M Roadster 3.2i 97 - 03 X BMW Z4 05 - 09 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.

Pagid Racing Brake Pad Shape No. 1144 Fits the Following Vehicles: Make Model Build (Year) Front Rear BMW M3 [E30] EVO I & II 1986 - 92 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.

Pagid Racing Brake Pads Shape No. 1544 Fits the Following Vehicles: BMW 318is - 325i [E30] 1982 - 1993 Front BMW Z1 1988 - 1991 Front Citroën ZX 2.0 16V 1996 - 1997 Front Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.

Pagid Racing Brake Pad Shape No. 2406 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 996 Carrera 3.4 & 3.6 1997 - 2005 X Porsche 718 Boxster 2.0  2016+ X Porsche 718 Boxster S 2.5 2016+ X Porsche 986 Boxster 1996 - 2005 X Porsche 987 Boxster 2005 - 12 X Porsche 981 Boxster 2.7 2012+ X Porsche 981 Boxster GTS 3.4 2014+ X Porsche 986 Boxster S 1999 - 2005 X Porsche 987 Boxster S 2005 - 12 X Porsche 981 Boxster S 3.4 2012+ X Porsche Cayenne Turbo [18" wheels] 2002 - 10 X Porsche 718 Cayman 2.0 2016+ X Porsche 718 Cayman S 2.5 2016+ X Porsche 987 Cayman 2009 - 12 X Porsche 981 Cayman 2.7 2013+ X Porsche 981 Cayman GTS 3.4 2014+ X Porsche 987 Cayman R (non-ceramic) 2010 - 12 X Porsche 987 Cayman S 2006 - 12 X Porsche 987 Cayman S 3.4 2013+ X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RS 44 Compound: The Pagid RS 44 (Orange) is a carbon-based, highly controllable pad with a progressive friction curve. It has a medium initial bite and good low temperature response. A very versatile pad for use on both front and rear axles, or in conjunction with RS14 on the front axle in FWD cars. Particularly popular in Porsche club racing, fitted as OEM on the Porsche 993 RS and GT2. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Carbotech CT28907CRR Performance & Racing Brake Pads Fits the Following Vehicles: Corvette C8 Z06 w/ Z07 CCB Rotors (Rear) 2023+ Corvette C8 E-Ray (Rear) 2024+ Precision braking starts here. The Carbotech CT28907CRR brake pads offer world-class stopping power across a range of compounds engineered for HPDE, club racing, time trials, and daily driving. Whether you're shaving tenths at a national event or building consistency during weekend track days, there's a Carbotech compound tailored to your performance goals. Manufactured in the USA using Carbotech’s proprietary ceramic and metallic formulations, these pads deliver unmatched modulation, rotor friendliness, and fade resistance. Friction materials have evolved significantly over the years. Brake pads were originally made with organic ingredients such as asbestos and carbon, held together by a strong resin. Most brake pads sold today are considered semi-metallic, semi-metallic brake pads use brass, copper, and steel wool shavings held together by a resin. Unfortunately, the main drawback about the use of steel strands, iron, graphite, and small amounts of filer and friction modifiers (used to provide strength and conduct heat away from the rotors) is that the metal shavings and iron must rub against steel rotors every time the brakes are applied. This generates more noise and is a lot more abrasive on the rotors. It also creates corrosive dust that can damage your braking system as well as the paint on your wheels and car. Friction materials that contain Ceramic Kevlar formulations have become recognized for their desirable blend of traits. This allows the Ceramic Kevlar pads to handle higher brake temperatures with less heat fade, and provide faster recovery after heavy braking. It also reduces brake dust and makes wheel maintenance easier! Ceramic Kevlar compounds extend brake life compared to most other semi-metallic and organic materials, and at the same time they outlast other premium pad materials by a significant margin, without compromising in noise control, pad life, and all around braking performance. The CT28907CRR shape fits a variety of high-performance applications, making it a go-to solution for drivers looking for track day brake pads that match their skill level and intensity. Carbotech CT28907CRR Brake Pad Highlights Multiple compounds available to match driving style and track conditions Fade-resistant ceramic-metallic formulations designed for extreme temperature stability Rotor-friendly design ensures longer disc life and reduced operating costs Made in the USA with race-proven quality and compound development Perfect for HPDE, time trials, autocross, club racing, and pro-level motorsports Available Compounds 1521: street compound designed for spirited street driving. Low dust and quiet operation with high initial bite.  1521 friction coefficient rated at 0.47. AX6: Autocross-focused compound offering more initial bite than 1521. Great for Solo and light-duty track use where cold bite matters. AX6 friction coefficient rated at 0.50. RP2: Ideal for racers seeking durability and rotor life in endurance club racing. Very low wear rates and excellent release characteristics. RP2 friction coefficient rated at 0.50. XP8: Entry-level race compound perfect for advanced HPDE and club racing. Consistent torque and excellent modulation under high heat. XP8 friction coefficient is rated at 0.56. XP10: Mid-tier race pad with higher bite and fade resistance than XP8. Excellent for time trials, wheel-to-wheel racing, and aggressive HPDE. XP10 friction coefficient is rated at 0.60. XP12: Designed for heavier cars or high-speed tracks. High torque levels and consistent performance across wide temperature ranges. XP12 friction coefficient is rated at 0.65. XP20: Ultra-high torque and friction. For drivers who demand maximum stopping power in pro-level racing environments.  XP20 friction coefficient rated at 0.68. XP24: Highest friction compound in the Carbotech lineup. Built for pro racing applications requiring peak performance and extreme heat tolerance. XP24 friction coefficient rated at 0.70. Carbotech 1521 The Carbotech™ 1521™ is a high-performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a low dust and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for track use. Carbotech AX6 The AX6™ is specifically engineered for Autocross applications. A high-torque brake compound delivering reliable and consistent performance over a wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. NOT FOR STREET USE! Carbotech RP2 The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has a strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. NOT FOR STREET USE! Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is their first racing compound. It provides good initial bite at race temperatures, high coefficient of friction, excellent modulation, and release characteristics. XP8™ offers extremely high fade resistance and is very rotor friendly. It's perfect for track day use with any tire.  NOT FOR STREET USE! Carbotech XP10 When Carbotech™ unleashed the XP10™ it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly-praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. NOT FOR STREET USE! Carbotech XP12 Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has a temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™ but compared to the competition the XP12™ is still very rotor friendly. NOT FOR STREET USE! Carbotech XP20 XP20™ is the latest iteration of the highly successful XP™ series of compounds.  With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is a major step in a progression of the XP™ series of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful.  NOT FOR STREET USE! Carbotech XP24 XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with an open wheel, closed wheel, sprint, and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). NOT FOR STREET USE! Carbotech CT28907CRR Frequently Asked Questions (FAQ) 1. Which Carbotech compound is best for daily driving? 1521 is ideal for spirited street use with minimal dust and noise.. 2. What’s the best compound for beginner HPDE drivers? XP8 is a great starting point for advanced HPDE, offering strong bite and fade resistance without being overly aggressive. 3. Can I mix Carbotech compounds front and rear? Yes, many drivers use a more aggressive compound in the front (e.g., XP12) and a slightly less aggressive one in the rear (e.g., XP10) to fine-tune balance. 4. Are Carbotech pads hard on rotors? No. All Carbotech compounds are known for being rotor-friendly, helping reduce rotor wear and operating costs. 5. Which compound is best for endurance racing? RP2 is engineered specifically for long-distance events where pad and rotor life are just as important as torque output. 6. Do Carbotech pads require special bedding procedures? Yes. A proper bedding-in process is critical for optimal performance. Carbotech provides detailed bedding instructions with every set of pads. Carbotech Brake Pad Bedding Procedures The bedding process transfers friction material from the pads into the pores of the brake rotor. It also matches the microscopic contours of the pads and rotors to increase surface contact. Proper bedding of pads & rotors will result in greater performance, longer pad life & less rotor wear. Failure to properly bed in your pads could lead to friction materials chunking and breaking up. This could also lead to overheating your pads and causing them to glaze over resulting in the car not being able to stop or slow fast enough. All new brake pads require a bedding process. The proper way to bed your brake pads and brake discs (rotors) is to bed them on the race track, NOT on the street. Start this process by pumping your brakes a few times to assure proper installation. Once on track perform several moderate (medium) near stops (to a very slow rolling speed) to thoroughly warm up the pads and rotors. This should take 1-2 laps. This allows a thin layer of the pad material to be transferred into the micro-grooves of the rotor. After the pads/rotors are warm, perform a series of hard near stops (to a slow rolling speed) until some brake fade is felt. This process should take about 2-4 laps (depending on the track). Once this occurs, then stay off the brakes (as much as possible) and bring your car into the pits/paddock to completely cool. Do not lock the tires during this operation. Allow brake pads and/or rotors cool down to ambient temperatures; no less than 30 minutes. The total bedding procedure should not take more than 5-6 laps or about 10-15 minutes. Failure to properly bed in your pads could cause friction material to chunk and break up resulting in poor pad performance and pad life. Improper bedding can also lead to overheating your pads and causing them to glaze over, resulting in the car not being able to stop or slow properly.

Pagid Racing Brake Pad Shape No. 2959 Fits the Following Vehicles: Make Model Build (Year) Front Rear BMW Mini Cooper 2002 - 06 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.

Performance Friction PFC Brake Pads 0396.XX.17.44 0396.11.17.44 (11 Compound) A new generation sprint and medium distance friction compound, offering the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of a stop while giving more cold and hot bite than the endurance-oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. 0396.08.17.44 (08 Compound) One of PFC's most popular compounds, the 08 came to fame in Endurance Sports Car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, with excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of competitors' endurance materials but with much higher bite and more consistent performance across a broad temperature range. 0396.332.17.44 (332 Compound) 332 has been formulated with lower bite and torque for rear applications. With smooth release, the 332 offers excellent stability and control. The 332 has been designed to work with ABS applications, and has exceptionally low wear rates This Pad Shape Fits the Following Vehicles: BMW E30 M3, rear BMW E36 M3, rear