Sparco Racing Seats ADV Elite Carbon Seat The Sparco ADV Elite Carbon is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the Sparco ADV Elite Carbon seat has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the Sparco ADV Elite Carbon seat was specially designed with an upright driving position preferred by Rally drivers. In addition to the Rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the Sparco ADV Elite carbon seat can withstand over 6,600 lbs. of lateral force. The Sparco ADV Elite carbon seat has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. The Sparco ADV Elite carbon seat is FIA approved when mounted with the Sparco #004988ADV side-mount brackets. Sparco Racing Seats ADV Elite Carbon TECHNOLOGY Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire retardant fabric Special non-slip fabric Sparco Racing Seats ADV Elite Carbon DIMENSIONS

Sparco ADV XT Carbon Racing Seat   The Sparco ADV XT is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating, FIA 8862-2009. This means the  Sparco ADV XT has been tested to an impact of approximately 70G. This rating is required for GT racing, and the Sparco ADV XT was specially designed with a more relaxed, comfortable driving position for GT cockpits. With strength at the top of its class, the Sparco ADV XT can withstand over 6,600 lbs. of lateral force. The Sparco ADV XT has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric, plus a special non-slip fabric in the shoulders and seat area. The Sparco ADV XT is FIA approved when mounted with the Sparco #0049605 side-mount brackets. Sparco ADV XT Carbon Racing Seat TECHNOLOGY Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for GT cockpits and driver position HANS device compatible Fire retardant fabric Special non-slip fabric Sparco ADV XT Carbon Racing Seat DIMENSIONS

Sparco SPX Reclining Seat (non-FIA)  The SPX is handcrafted in Italy using the same technology and materials used for OEM super cars.  In fact, the SPX is the first carbon fiber reclining seat available to the public that meets the same specifications required by the OEM manufacturers and weighs only 28 pounds. What this means is that the attention to detail and quality put into the SPX cannot be matched by any other seat manufacturer on the market today.  The Sparco SPX seat represents the ultimate evolution of the sport seat. The SPX uses a combination of carbon fiber and advanced composites that give the driver both comfort and performance in a lightweight package. With the ergonomic shape of the carbon fiber backrest and the seating position of the RTM composite lower, the SPX holds the driver during extreme lateral forces and is comfortable for long road trips.  The SPX is covered in a combination of beautiful perforated and smooth Italian leather. The center of the SPX is covered in Alcantara suede to allow you to gain absolute control of your vehicle and enhance your driving experience. To finish off the performance look, all hand stitching is done in tone-on-tone black with the Sparco logo embroidered in matching black. The gloss finished carbon fiber backrest features a leather pull strap which releases the backrest to fold forward to allow access to a backseat or storage area. The backrest also features a micro adjustment knob that allows you to dial in the perfect driving position.  The SPX is sold in driver and passenger versions (left and right). TECHNOLOGY Lightest carbon fiber reclining seat on the market Gloss carbon fiber back rest RTM composite lower (an advanced composite with strength and weight similar to carbon fiber) Covered in hand-stitched Italian leather and Alcantara suede Leather pull for seat back release Sold in driver (left) and passenger (right) versions SPX DIMENSIONS A LITTLE HISTORY Sparco has designed and engineered some of the most advanced sport seats in the world, including the first-ever adjustable carbon fiber seat in 1998 for the Lamborghini Diablo. Since then, countless super cars such as the Bugatti Veyron and Lamborghini Aventador have used Sparco design and technology in their vehicles. In addition to seats, Sparco also produces carbon fiber body panels, bumpers, roofs and aerodynamic pieces, in addition to structural carbon fiber parts like stressed-member engine cradles and other chassis parts.  Supplying OEM manufacturers requires every part to pass demanding safety and durability tests. Sparco’s extensive expertise in carbon fiber technology is why they're a Tier One supplier for Alfa Romeo, AMG, Aston Martin, Audi, Bentley, Bugatti, Ferrari, Koenigsegg, Lamborghini and Lotus to name a few. 

Sparco Prime RF-10 8860 Supercarbon The Sparco RF-10 Supercarbon: The Supercar of Helmets! Hey, racetrack royalty! Ever feel like your current helmet is more of a tortoise than a hare? Time to trade that old noggin-protector in for something more... speedy. Introducing the Sparco Prime RF-10 8860 Supercarbon Helmet - the crown jewel of racing gear. Imagine the union of sheer beauty and beastly strength - that’s the Sparco Supercarbon for you. This carbon-fiber-crafted beauty isn't just for show – it’s certified to the highest FIA standards. That means, whether you're pulling G's on the track or casually setting lap records, this bad boy is ready to rumble. Speaking of rumble, ever had your visor fog up during an intense lap? Annoying, right? The RF-10's got you covered with a crystal-clear view, thanks to its brilliant chin ventilation system. Plus, the center visor locking mechanism is like Fort Knox for your face—secure and safe. Thirsty mid-race? No worries! It's prepped to accommodate a drinks system. Yeah, you heard right. It's like a mini fridge, but for your head. This helmet isn’t just about the outside though. Inside, it's plush and comfortable. After a sweaty race, you can pop out that interior lining and give it a wash. Talk about staying fresh!  Sparco Prime RF-10 8860 Supercarbon Product Highlights: Strong visor game: comes with a clear visor. Looking for that mysterious racer vibe? Opt for the dark smoke visor (sold separately). The visor (FIA approved) can also be infinitely adjusted. Approved and certified: FIA 8860-2018 & Snell SA2020 approved. Wash and wear: Removable interior lining, because who doesn't love freshness? Stay hydrated: accommodates an optional drink system. Head and neck safety: comes with factory fitted FHR posts. Racers, it’s time to upgrade. Because while they say it’s not about the gear but the driver – well, a bit of Sparco Supercarbon magic doesn’t hurt either.  So, ready to be the envy of the track? Hit that 'Add to cart' button and let the Sparco Prime RF-10 8860 Supercarbon helmet take you to the finish line in style and safety! The Sparco Prime RF-10 8860 Supercarbon helmet is homologated to the latest and highest FIA standard currently available making this helmet ready to use in any motorsport discipline. The radically designed carbon fiber shell is lightweight yet extremely strong, engineered to withstand the most rigorous of accidents. A center visor locking mechanism ensures a positive and safe visor closure, while the chin ventilating system provides maximum air flow through the helmet ensuring the visor stays clear. The Sparco Prime RF-10 8860 Supercarbon helmets ventilation is provided by air intakes situated on the front of the race helmet that gives maximum air flow through the helmet ensuring the visor stays clear. The top ventilation acts as an exhaust to remove excess heat and condensation. The interior lining of the helmet is also removable which allows it to be washed very easily. FIA 8860-2018 and Snell SA2020 approved. Please note: Sparco Prime RF-10 8860 Supercarbon helmet is supplied with a clear visor. Pictured with an optional dark smoke visor. Sparco Prime RF-10 8860 Supercarbon Helmet Size Chart   Sparco Prime RF-10 8860 Supercarbon Helmet Frequently Asked Questions (FAQ): Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Consult the professionals at Competition Motorsport any time you have specific questions about your racing helmet. Why do I need a racing helmet? Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports. How do I choose the right size Sparco Prime RF-10 Supercarbon? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Competition Motorsport. What safety standards should I look for in a racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use. What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head. Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection. How often should I replace my Sparco Prime RF-10 Carbon Fiber auto racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately. Are expensive racing helmets safer than budget ones? In a word, yes. Safety standards dictate the minimum requirements a helmet must meet, so even budget-friendly helmets offer some protection. More expensive helmets typically exceed minimum standards and have much more R&D and engineering behind their design. They are usually lighter weight, constructed of superior materials, fitment is more customizable, and often come with additional features. How do I maintain and clean my Sparco Prime RF-10 Carbon Fiber racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Matte Helmet Care Kit. Do I need to wear a balaclava under my Sparco Prime RF-10 Carbon Fiber racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Competition Motorsport recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection. Is the SNELL SA rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance. Is the FIA helmet certification important? Yes, FIA (Fédération Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards. Can I wear glasses with my Sparco Prime RF-10 Carbon Fiber helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses. Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most. Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards. Can I buy replacement parts for my Sparco Prime RF-10 Carbon Fiber helmet, like visors or padding? Competition Motorsport carries Sparco helmet replacement parts, including visors and padding, to extend your helmet's lifespan. How can I prevent helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races. What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion. How do I store my Sparco Prime RF-10 Carbon Fiber helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Competition Motorsport Evo Helmet Bag Where can I buy a certified racing helmet? You should only buy from a professional, authorized dealer who has sold thousands of helmets. You can find all the best brands at Competition Motorsport online or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support. Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track. We take immense pride in offering a wide selection of Sparco auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Sparco has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world. Key Features of Sparco Racing Helmets: Unparalleled Safety: Sparco racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions. Premium Materials: Crafted with precision, Sparco helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection. Comfort and Fit: Sparco's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit. Aerodynamic Design: Sparco helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track. Frequently Asked Questions About Sparco Helmets: Where are Sparco helmets made? Sparco helmets are proudly manufactured in Italy, maintaining the highest quality standards. Is Sparco a good helmet brand? Yes, Sparco is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts. Are Sparco helmets Snell approved? Yes, many Sparco helmets are Snell approved, meeting rigorous safety standards. Are Sparco helmets FIA approved? Absolutely, several Sparco helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements. Do Sparco helmets run small? Sparco offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit. For racers who demand the best in safety and performance, Sparco auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Sparco Racing Helmets: Sparco Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Sparco Racing Helmet to suit your racing needs. Sparco Racing Helmet: Each Sparco Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Sparco Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Sparco Race Helmets: Sparco Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Sparco has race helmets tailored for your specific discipline. Sparco Race Helmet: Your Sparco Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Sparco Race Helmet helps reduce wind resistance, giving you a competitive edge. Sparco Helmet: A Sparco Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Sparco Helmets provide during intense racing conditions. Sparco Helmets: Sparco Helmets have a rich history of innovation and excellence. The extensive range of Sparco Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Sparco Carbon Fiber Helmet: Sparco Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Sparco's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Sparco Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Sparco Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Sparco Racing: Sparco Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Sparco Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Auto Racing Helmets: Auto racing helmets from Sparco are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.

Sparco SPR Reclining Seat (non-FIA) Drawing on our decades of racing history, Sparco has created an extensive line of street car seats that offer the ultimate in comfort and performance. Our ergonomic designs help cradle and protect the driver against even the most demanding lateral forces.The Sparco SPR is a top-level sport seat that holds the driver during spirited driving and is also comfortable for long road trips. It features the ergonomics as the Sparco SPX but at a more economical price. The SPR has a lightweight RTM composite shell along with an OEM derived recliner system with dual handles for multiple adjustment. The SPR is covered in synthetic leather with soft-touch micro-suede center. To finish off the performance look, the SPR is hand stitched in tone on tone black with the Sparco logo embroidered in matching black. The Sparco SPR seat represents the ultimate evolution of the sport seat. The  Sparco SPX uses a combination of carbon fiber and advanced composites that give the driver both comfort and performance in a lightweight package. With the ergonomic shape of the backrest and the seating position of the RTM composite lower, the Sparco SPR holds the driver during extreme lateral forces and is comfortable for long road trips.  Sparco SPR Reclining Seat TECHNOLOGY Lightweight RTM Composite shell Durable synthetic leather OEM Derived Recliner Accepts 4-point harness Ergonomic bolsters and padding provide support and comfort Soft touch Micro-suede and Synthetic Leather   Sparco SPR Reclining Seat DIMENSIONS A LITTLE HISTORY Sparco has designed and engineered some of the most advanced sport seats in the world, including the first-ever adjustable carbon fiber seat in 1998 for the Lamborghini Diablo. Since then, countless super cars such as the Bugatti Veyron and Lamborghini Aventador have used Sparco design and technology in their vehicles. In addition to seats, Sparco also produces carbon fiber body panels, bumpers, roofs and aerodynamic pieces, in addition to structural carbon fiber parts like stressed-member engine cradles and other chassis parts. Supplying OEM manufacturers requires every part to pass demanding safety and durability tests. Sparco’s extensive expertise in carbon fiber technology is why they're a Tier One supplier for Alfa Romeo, AMG, Aston Martin, Audi, Bentley, Bugatti, Ferrari, Koenigsegg, Lamborghini and Lotus to name a few.

Sparco QRT-C Performance Carbon Fiber Racing Seat The Sparco QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The Sparco QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. Sparco QRT-C Performance Carbon Racing Seat Sizing Large – up to a 36” waist (pants size) WHAT IS  Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Performance Carbon Racing Seat Technology Ultralight Carbon Fiber Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved SPARCO QRT-C PERFORMANCE CARBON DIMENSIONS

Sparco EVO Performance Carbon Fiber Racing Seats   The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track.  Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsLeather and Alcantara UpholsteryFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco Prime Driver Racing Suit   Developed for McLaren's Formula One team, the Sparco Prime suit is one of the lightest FIA 8856-2018 approved racing suits in the world. The Sparco Prime has unparalleled technological features created in the Sparco R&D laboratories. This project involved optimizing every single detail of the suit in terms of material and construction. This includes an ultra-slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, reduced neck and shoulder pads, and thinner thread used in the flattened stitching. The Sparco Prime driver suit features a three-layer construction using proprietary Sparco technology. The third outer layer is a double-faced mesh made from original DuPont Nomex Comfort, woven using the Kompact system. This specialized material contains a high percentage of anti-static fibers, providing extremely effective anti-static properties as well as excellent breathability. The Sparco Prime also features pre-curved arms and legs, and an inner-thigh stretch panel for the ultimate in racing comfort. The Sparco Prime Race Suit is available in three colorways in sizes EU48 - EU66. Sparco Prime Racing Driver Suit Details: FIA 8856-2018 and SFI 3.2A/5 approved Exclusive DuPont Nomex fibers provide superior fire protection and comfort Pre-curved arms and legs Lightweight zipper and collar Inner thigh stretch panel for comfort on long stints

Sparco Circuit / Circuit II Carbon Fiber Racing Seat The Sparco Circuit Carbon is the carbon fiber version of the Circuit QRT which is a competition seat designed to provide additional head and neck protection. It is constructed with light weight “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The Circuit Carbon includes integrated bolsters to protect the head from lateral impacts. This seat can be used with an FHR (frontal head restraint) device for even greater protection. The ultra-light shell is features impact-absorbing material surround on the headrest. It has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The Circuit Carbon is FIA 8859-1999 approved. SPARCO CIRCUIT CARBON FIBER RACE SEAT TECHNOLOGY Ultralight Pre-Preg Carbon Fiber shellExcellent fitment (for a head restraint seat) into smaller cockpitsExcellent ergonomicsFire-retardant fabricSpecial non-slip fabricFIA 8859-1999 The Sparco Circuit Carbon Fiber is an ultra-light competition seat specifically designed for circuit use. Made from carbon fiber, the Sparco Circuit Carbon Fiber has an ultra-light shell. The Sparco Circuit Carbon Fiber includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body.  The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit Carbon Fiber is FIA approved and available in two sizes: Circuit (Standard) and Circuit II (Large). The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear.  SPARCO CIRCUIT CARBON FIBER RACE SEAT SIZING Small / Narrow – up to a 32” waist (pants size)  SPARCO CIRCUIT II CARBON FIBER RACE SEAT SIZING Medium – up to a 36” waist (pants size)  

Sparco Martini Legend Kevlar Racing Seat Rev up your racing experience with the Sparco Martini Legend Kevlar race seat, a meticulously crafted seat with a winning combination of Kevlar and carbon fiber. Engineered for unparalleled performance, safety and style, this race seat is the pinnacle of motorsport excellence. With its exceptional construction and iconic design, it's no wonder this seat is at the top of every racing enthusiast's wishlist. SPARCO: UNRIVALED PERFORMANCE The Sparco Martini Legend Kevlar race seat boasts an innovative construction that combines lightweight Kevlar and dry carbon fiber. This fusion provides outstanding strength, rigidity, and durability while maximizing safety. The seat's ergonomic design ensures maximum comfort during intense races, allowing you to maintain full control of your vehicle at high speeds. SPARCO MARTINI LEGEND SUPERIOR SAFETY FEATURES Safety is of utmost importance in motorsports, and the Sparco Martini Legend Kevlar race seat excels in this aspect. It meets the stringent FIA 8855-1999 safety standard, guaranteeing optimal protection in an impact. The seat features integrated head and shoulder protection, bolstered side supports, and deep thigh cushions to minimize the risk of injury. With this seat, you can race with confidence, knowing that your well-being is prioritized. ICONIC SPARCO MARTINI RACING STYLE Stand out on the track with the legendary Martini Racing design adorning the Sparco Martini Legend Kevlar race seat. The iconic Martini Racing colors are proudly displayed on this seat, instantly recognizable by racing enthusiasts worldwide. This timeless aesthetic, combined with the impeccable craftsmanship of Sparco, creates a seat that not only performs but also captivates attention. Join the elite ranks of motorsport legends and elevate your racing to new heights with the Sparco Martini Legend Kevlar race seat. Immerse yourself in the race with its Kevlar and carbon fiber construction, delivering unrivaled performance, safety, and iconic style. Don't settle for anything less than the best – equip yourself with a seat that embodies the essence of motorsport excellence. Purchase yours today and experience the thrill of true racing mastery. Sparco Legend Kevlar Race Seat Sizing Medium / Large (up to 36” waist) Sparco Martini Legend Kevlar Race Seat Technology Ultra lightweight dry carbon/Kevlar shell Bottom mount only Excellent ergonomics FIA 8859-1999 approved Sparco Martini Legend Kevlar Race Seat Dimensions

Sparco EVO Performance Carbon Fiber Racing Seats 2029 Expiry   The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track.  Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsLeather and Alcantara UpholsteryFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco QRT-C Performance Carbon Fiber Racing Seat The Sparco QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The Sparco QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. Sparco QRT-C Performance Carbon Racing Seat Sizing Large – up to a 36” waist (pants size) WHAT IS  Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Performance Carbon Racing Seat Technology Ultralight Carbon Fiber Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved SPARCO QRT-C PERFORMANCE CARBON DIMENSIONS

Sparco EVO Performance Carbon Fiber Racing Seats 2028 Expiry   The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track.  Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsLeather and Alcantara UpholsteryFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco QRT-C Performance Carbon Fiber Racing Seat  2028 Expiry  The Sparco QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The Sparco QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. Sparco QRT-C Performance Carbon Racing Seat Sizing Large – up to a 36” waist (pants size) WHAT IS  Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Performance Carbon Racing Seat Technology Ultralight Carbon Fiber Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved SPARCO QRT-C PERFORMANCE CARBON DIMENSIONS