Sparco
Sparco Sky RF-7W Carbon Fiber Helmet SA2020
$1,099.00
Sparco Sky RF-7W Carbon SA2020
The Sparco Sky RF-7W has a carbon fiber outer shell reinforced with layers of carbon-Kevlar. It includes a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase circulation to a redesigned interior. The interior has channels which not only cool the driver, but has additional channels which route air towards the visor, which reduces the chance of visor fogging. Sky RF-7W has removable, washable padding that can be repositioned for a comfortable fit. All interior seams have been removed from areas where greater pressure is exerted on the head.
The Sparco Sky RF-7W has been designed to accommodate a drink tube and an intercom system. Available in sizes XS to XL (including new M/L size using Sparco's smaller, lighter shell) with a red or black interior. Sky RF-7W has HANS posts pre-installed. SNELL 2020 and FIA 8859-2015 approved.
ADDITIONAL SPARCO SKY RF-7W HELMET SHIELDS AVAILABLE HERE
SPARCO SKY RF-7W CARBON FIBER HELMET FEATURES
Choose red or black interior color
Light weight carbon fiber with carbon-kevlar base layers
New "Medium/Large" size uses the lighter and more compact shell
HANS posts pre-installed
Anodized aluminum chin strap hardware
Removable, washable lining
Wind tunnel optimized venting with anti-fog air channels
Pre-molded interior to accommodate drink tubes and an intercom system (sold separately).
SNELL SA2020 and FIA 8859-2015 approved
Don't forget to check out the Competition Motorsport Performance Racing Helmet Bag, the perfect way to keep your new Sparco Sky RF-7W auto racing helmet safe and secure throughout each race weekend.
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
Arai
Arai GP-7 Helmet SA2020
from $1,069.95
Arai GP-7 SA2020 Helmet
A driver favorite, the Arai GP-7 SA2020 helmet combines the most popular Arai features with new, improved upgrades. The Arai GP-7 is constructed with Arai’s own PBcLc (Peripherally Belted Complex Laminate) shell construction and the same shell shape as the Formula One-grade GP-7SRC model. New ventilation, a soft EPS liner, and a wider eye port for optimized peripheral vision are part of this new shell which gives the driver notable strength and flexibility. Replaceable cheek pads make racing comfortable for any driver, as do the three larger, closeable intake vents and two larger exhaust vents on the ventilation system.
The Arai GP-7 helmet is Snell SA2020 certified with factory-installed M6 washers/nuts. Drivers of any skill level can install their own Head and Neck Restraint system using a 6mm bolt. The FIA-8859-2015 certification sticker is applied to the interior liner of the helmet.
THE ARAI GP-7 AUTO RACING HELMET POSITIVE SHIELD LATCH
Simple yet effective, the positive latch mechanism on the Arai GP-7 SA2020 helmet gives the driver solid shield latching, but is seamlessly integrated into the standard shield system for ease of use.
NEW SHIELD PIVOT HARDWARE FOR THE ARAI GP-7 HELMET
The Arai GP-7 SA2020 features new shield pivot hardware with improved aerodynamics based on the updated track slider design. An increased peripheral field of view is featured on the 6 series, which surpasses the 5 series in visibility. The wider eye port, shield, and pivot hardware were all developed on the RC and adapted to the Arai GP-7 SA2020 helmet.
Additional Arai GP-7 shields in various tints and colors available here.
ARAI GP-7 AUTO RACING HELMET VENTILATION
Increased airflow is key to the GP-7 SA2020 helmet’s design. This includes bigger, closeable intake vents with large 10mm holes in both front and rear. Larger rear vents also provide better airflow.
M6 ANCHORS FOR THE ARAI GP-7 HELMET
Drivers of all skill levels will appreciate the integrated, pre-installed M6 threaded washer/nut with 6mm threads which accepts a range of Head and Neck Restraint devices. A flat surface area around the mounting nut will let the anchor post base to rest flush along the surface of the helmet and around the full perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.
NEW CHINBAR FOR THE ARAI GP-7
The Arai GP-7 SA2020’s new, ergonomic chinbar and ridge at the bottom edge of the shell lowers the center of gravity and increases the structural integrity of the helmet. Additional improvements include a rise in the shell above the shoulders for increased clearance.
EJECT READY CROWN PAD OF THE ARAI GP-7 HELMET
Arai's optional Eject system can be easily accommodated via a pre-cut pocket under the helmet’s crown pad.
ARAI GP-7 HELMET SIZES
XS (54cm) - L (60cm)
ARAI GP-7 HELMET COLORS
Gloss White and Matte Black
Be sure to check out the Competition Motorsport Performance Racing Helmet Bag to keep your new Arai GP-7 safe and secure throughout each race weekend.
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
Bell
Bell Europe MAG-10 Rally Pro Open Face Helmet
$999.95
Bell MAG-10 Rally Pro Open Face Helmet
Elevate Your Rally Game with the Bell Europe MAG-10 Rally Pro
Experience the pinnacle of motorsports protection with the Bell open face helmet, fully compliant with FIA 8856-2015 homologation standards. Crafted from a lightweight yet robust fiberglass-carbon composite shell, this helmet promises durability without compromising on comfort. Key features include the state-of-the-art ZeroNoise® intercom set, a built-in Nexus socket with a removable cover, and the detachable Half Chin Bar (HCB) is designed specifically for the microphone arm.
For added convenience, it comes with easily removable cheek pads. The adjustable sun peak paired with an integrated anti-scratch Dark Smoke sun screen ensures excellent vision in varying conditions. Plus, for enhanced safety, it's fitted with HANS post anchors, making it a top choice for motorsports enthusiasts who prioritize both style and safety.
Benefiting from the extensive research & development program undertaken for the HP10 Rally, the Mag-10 Rally Pro is a sophisticated, lightweight modern design giving discerning drivers a high performance open-face rally helmet. Its extremely comfortable, professional fit combined with outstanding sound-insulation makes the Bell Mag-10 Rally Pro the helmet of choice for rally drivers and co-drivers looking for a premium product.
Bell MAG-Pro Rally Helmet Features
Complies with FIA 8859-2015 homologation standards
Lightweight fiberglass-carbon composite shell
ZeroNoise® intercom set integrated into the helmet
Features high-quality speakers, sound-isolating ear cups, and a noise-canceling mic for clear communications
Built-in Nexus socket with removable cover
Detachable chin bar for microphone arm flexibility
Easily removable cheek pads for comfort customization
Adjustable peak for varied lighting conditions
Integrated anti-scratch dark smoked sunscreen
Equipped with HANS anchors for enhanced safety
Designed for elite motorsports enthusiasts
Bell MAG-10 Rally Pro Helmet Options
Exterior: Gloss White or Offshore Orange
Interior: dark grey high-strength Comfort FR® fabric
Adjustable visor screens available in various colors and two lengths for optimal visual comfort
Sizes (in cm): 54, 55, 56, 57, 58, 59, 60, 61, and 61+
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 FN Composite Helmet SA2020
$999.00
$999.00
Stilo ST5 FN Composite Racing Helmet
The Most Customizable Helmet in the World
The Stilo ST5 FN Composite helmet is an iconic helmet used in a variety of race types. Crafted from a Multi Sandwich Fiberglass layup and exceeding the Snell SA2020 and FIA 8859 rating, this helmet is predominantly used in open cockpit environments and features an array of improvements from the ST4 Helmet. Weighing in at 3.39lbs in the small shell size and 3.63lbs in the large shell size this helmet comes standard with a sleek white color with blue interior. The ST5 FN helmet most often is use in the top level racing where every ounce matters.
The FN (Formula Naked) helmet line was designed for open cockpit environments and features an aerodynamic design, while still featuring an array of features making it the go-to helmet for racing professionals. The ST5 builds upon our ST4 design with a larger eye port which opens past the line of sight and includes an 3mm clear visor coming standard with our anti-fog coating. Improvements also have been made to the interior design with removable cheek & top pads allowing drivers to obtain the perfect fit.
Helmets come standard with removable earmuff cushions which provide a significantly quieter environment for the driver by isolating the ear.
Other Features: All Stilo closed faced helmets come in two separate shell sizes allowing us to craft a better fitting helmet that is lighter weight. Ready for non-integrated electronics, air supply, and hydration or any combination of the three this helmet is one of the top helmets on the IMSA grid. M6 nuts pre-installed for easy FHR installation Additional accessories available such as aero, top air kits, and an array of visor options.
Stilo FN Composite Helmet Features
Made in Italy and assembled by hand by skilled craftsmen
Although updated to meet the newest Snell SA2020 certification, the Stilo ST5 FN retains its FIA 8858-2015 homologation as well. This makes the helmet legal for nearly all road race usage (although some sanctioning bodies require FIA 8860 homologated helmets.)
Flexibility and Functionality Built In
The Stilo ST5 FN Composite is unsurpassed in built-in flexibility. Its two side ports can be fitted with 3 different types of integrated communication electronics, forced air, helmet eject system, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the Stilo ST5 FN is sleek and seamless. When not in use, you don't even know the features are there.
Additional shields in many tints and colors can be added in the dropdown above.
Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use.
Note: We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the larger shell. Please order accordingly.
Stilo ST5 FN Racing Helmet Details
Noise attenuating earmuffs are included to reduce exterior noise.
Seamlessly integrate communications, forced air, hydration and/or eject options into your Stilo ST5 FN helmet.
Snell SA2020 certification offers increased protection at higher g-forces and speeds than SA2015.
Existing Stilo ST5 visor shields and accessories work on ST5 SA2020 helmets.
Sizes shown in centimeters
Other Stilo ST5-Series Helmets Available
Stilo Helmets ST5.1 GT Carbon Helmet
Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet
Stilo Helmets ST5 GT 8860-2018 Carbon Helmet
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5.1 GT Composite Helmet SA2020
from $999.00
$999.00
Stilo ST5.1 GT Composite Racing Helmet
The Most Customizable Helmet in the World
The Stilo ST5.1 GT Composite is Stilo's Snell SA2020 version of their best-selling kevlar-carbon composite helmet. With an autoclave molded shell, the Stilo ST5.1 GT Composite auto racing helmet offers superior safety and protection compared to fiberglass and composites of competitors helmets. You get all this without sacrificing comfort or features, as Stilo continues to focus on minimizing weight and maximizing flexibility.
With its large eye port, the Stilo ST5.1 GT Composite offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves.
Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT retains its FIA 8858-2015 homologation as well. This makes the helmet legal for nearly all road race usage (although some sanctioning bodies require FIA 8860 homologated helmets.)
Flexibility and Functionality Built In
The Stilo ST5.1 GT Composite is unsurpassed in built-in flexibility. Its two side ports can be fitted with 3 different types of integrated communication electronics, forced air, helmet eject system, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the Stilo ST5.1 GT is sleek and seamless. When not in use, you don't even know the features are there.
Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo offers simply the best modular racing helmet on the market.
Additional shields in many tints and colors can be added in the dropdown above.
Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use.
Note: We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the larger shell. Please order accordingly.
Stilo ST5.1 GT Racing Helmet Details
Noise attenuating earmuffs are included to reduce exterior noise.
Seamlessly integrate communications, forced air, hydration and/or eject options into your Stilo ST 5.1 GT helmet.
Snell SA2020 certification offers increased protection at higher g-forces and speeds than SA2015.
Existing Stilo ST5 visor shields and accessories work on ST5.1 SA2020 helmets.
Sizes shown in centimeters
Other Stilo ST5-Series Helmets Available
Stilo Helmets ST5.1 GT Carbon Helmet
Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet
Stilo Helmets ST5 GT 8860-2018 Carbon Helmet
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
Bell
Bell RS7 Pro Helmet SA2020
from $899.95
Bell Racing Helmets RS7 Pro SA2020 Helmet
Based on the BELL HP7 design and featuring a lightweight carbon composite shell using Bell’s high-pressure proprietary molding system, the BELL RS7 auto racing helmet uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capabilities. The sleek, modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake covers (available separately). The BELL RS7 helmet double screen anti-fog (DSAF) visor and rubber gasket seal ensured air, water and dust will not enter the eyeport.
BELL RS7 AUTO RACING HELMET CERTIFICATIONS
Snell SA2020
FIA 8859-2015
BELL RS7 AUTO RACING HELMET FEATURES
Lightweight carbon composite shell.
Advanced multi-density, multi piece liner maximizes energy absorption and impact performance.
Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor.
Powerful top and chin bar ventilation system with 14 air intake and extraction channels.
Shell and shield design optimized to improve aerodynamic performance.
Integrated channels offer multiple options to install drink tube and radio systems.
Air intake, side air extractors, rear spoiler, top and chin bar gurneys available separately.
Top-air attachments available separately for use with external cooling systems.
Factory installed HANS posts.
Synthetic rubber gasket seal prevents dirt and water entering the helmet.
Shield and pivot kit: SE07, SV(SE07).
ADDITIONAL BELL RS7 PRO HELMET SHIELDS AVAILABLE HERE
BELL RS7 AUTO RACING HELMET COLORS
Solid colors: White or Matte Black.
Graphics colors: Stamina Grey or Stamina Red.
BELL RS7 AUTO RACING HELMET AVAILABLE SIZES
Sizes: 54cm (6 3/4) to 61cm+ (7 5/8)
IN THE BELL RS7 AUTO RACING HELMET BOX:
Bell RS7 Pro SA2020 auto racing helmet
Clear SE07 DSAF shield
Draw string helmet bag
HANS post anchors installed
Don't forget to check out the Competition Motorsport Performance Racing Helmet Bag, the perfect way to keep your new Bell RS7 Pro auto racing helmet safe and secure throughout each race weekend.
This helmet will ship with signature required for delivery.
Arai
Arai GP-5W Helmet SA2020
$849.95
Arai Auto Racing GP-5W SA2020 Helmet
The Arai Auto Racing GP-5W SA2020 Helmet is perfect for stock car, sedan, and rally drivers. The GP-5W Helmet is a favorite because of its wider, 90mm (approx 3.5” top to bottom) eye port opening. The GP-5W uses its own exclusive shield with this larger opening.
The ARAI GP-5W is Snell SA2020 certified with M6 washer/nuts installed at the factory. Drivers of any experience level will be able to easily install their Head and Neck Restraint system anchor posts (sold separately). The Arai Auto Racing GP-5W SA2020 also comes with the FIA-8859-2015 certification sticker found on the shell’s interior lining.
ARAI GP-5W AUTO RACING HELMET SCLC CONSTRUCTION
The ARAI GP-5W Helmet SA2020 is built with Arai's exclusive, very-lightweight SCLC (Super Complex Laminate Construction) shell technology. This ensures a low overall weight to balance the added weight of the helmet’s larger shield.
ARAI GP-5W AUTO RACING HELMET SHELL SHAPE
The Arai Auto Racing GP-5W Helmet SA2020 helps reduce fatigue for the driver due to its more natural head shape, smaller shell size, and lower center of gravity to assist with balance and stability.
INTERIOR FIT OF THE ARAI GP-5W
The Arai Auto Racing GP-5W Helmet SA2020 is designed to closely match the shape of the human head, allowing for a snug, yet comfortable, fit. Arai has developed this “natural” shape over more than 50 years of helmet design research and refinement.
WIDER EYE PORT OF THE ARAI GP-5W
Sedan drivers will appreciate the larger, 90mm eye port, top to bottom. A visor peak is available for drivers not needing a shield on the The Arai Auto Racing GP-5W Helmet SA2020.
ARAI GP-5W REMOVABLE/REPLACEABLE CHEEK PADS
Low maintenance, easy-to-clean cheek pads are removable, washable, and replaceable with pads of varying thickness to provide a snug, safe fit.
M6 ANCHORS
The FIA-8859-2015 certified GP-5W helmet has M6 threaded washer/nuts with 6mm threads pre-installed. This convenient feature lets the driver use the anchor system that works best with their Head and Neck Restraint. The anchor posts are made to rest flush on the helmet surface, accepting a variety of HNR anchor systems.
ARAI GP-5W VENTILATION
Closed-cockpit drivers need greater airflow when racing. The upper ventilation system of the GP-5W SA2020 helmet incorporates two exhaust vents and two large intake ducts to help keep the driver cool and comfortable.
AVAILABLE VISOR SHIELDS FOR THE ARAI GP-5W
Available shields for the Arai GP-5W are available here. Arai anti-fog shields are available in clear, light tint and dark smoke. Standard shields also come in clear, light tint and dark smoke.
Also, don't forget to check out the Competition Motorsport Performance Racing Helmet Bag to keep your new GP-5W safe and secure throughout each race weekend.
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship to you with signature required for delivery.
HJC
HJC H10 Carbon Fiber Helmet SA2020
$799.99
HJC H10 Carbon Fiber SA2020 Helmet
The HJC H10 Carbon Fiber SA2020 helmet is the ideal helmet for all types of racing. From the your local track day to the starting line at SCCA Nationals, its comfortable fire-resistant, moisture-wicking Comfort-Carbon interior and Advanced Ventilation System keep you cool and comfortable. The HJC H10 Carbon is an affordable alternative to more expensive carbon fiber helmets without sacrificing fit, feel or safety.
HJC H10 CARBON FIBER AUTO RACING HELMET FEATURES
Snell SA2020 approved
HJC H10 carbon fiber Helmet weight (size L): 3.2 lbs (1.45 kg)
Carbon fiber composite weave shell is extremely light weight
Superior fit and comfort using advanced CAD technology
ACS (Advanced Channeling System) provides front-to-back airflow flushing heat and humidity up and out
Optional shields available: Amber, Dark Smoke, Dark Blue, and Black Chrome
Optional clear spoiler is available
Polycarbonate anti-fog shield with tear-off posts
Pre-installed M6 terminals for head and neck restraints
Improved front ventilation
Double D-ring retention system
HJC H10 CARBON FIBER AUTO RACING HELMET SIZES
Sizes XS-XXL
ADDITIONAL HJC H10 CARBON FIBER HELMET SHIELDS AVAILABLE HERE
Also, check out the Competition Motorsport Performance Racing Helmet Bag, the best way to keep your new HJC H10 Carbon safe and secure throughout each race weekend.
SIZE CHART
SIZE
CENTIMETER
HAT SIZE
INCHES
XS
54-55
6 3/4 – 6 7/8
21 1/4 – 21 5/8
S
56-57
7 – 7 1/8
22 – 22 1/2
M
58-59
7 1/4 – 7 3/8
22 7/8 – 23 1/4
L
60-61
7 1/2 – 7 5/8
23 5/8 – 24
XL
62-63
7 3/4 – 7 7/8
24 3/8 – 24 3/4
XXL
64-65
8 – 8 1/8
25 1/4 – 25 5/8
Bell
Bell GT6 Pro Helmet SA2020
$799.95
Bell Racing GT6 Pro Helmet SA2020
The Bell Racing GT6 Pro auto racing helmet features the same modern and aggressive design as HP6, developed for racers in closed-car environments and featuring a wide eyeport for extended vision with a lightweight Premium carbon glass shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional ear cups providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in GT6 RD Titanium version).
Bell GT6 Pro Auto Racing Helmet Features
Lightweight premium carbon/fiberglass composite shell
FIA 8859-2015 and Snell SA2020 homologated
Wide eye port for excellent vision in closed-cockpit cars
Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance
Integrated channels in face piece offer multiple options to install drink tube and radio systems
Extraction vents maximize cooling and air circulation
Factory-installed HANS anchors
Optional top forced-air intake can be installed on the left or right top side vents for use with an external cooling system
Optional ear cups increase noise insulation
Interior: Dark Grey high-strength, high comfort FR fabric
Additional Bell Racing GT6 Pro Helmet Visors Are Available Here
Bell GT6 Pro Auto Racing Helmet Colors
The Bell GT6 Pro is availabile in your choice of Gloss White or Matte Black.
Bell GT6 Pro Auto Racing Helmet Sizes
Available in Sizes: 54cm (63/4 in) to 61cm+ (75/8 in)
What Comes in the Bell GT6 Pro Box?
Bell Racing GT6 Pro auto helmet
Clear SE06 3mm DSAF shield (installed)
Drawstring helmet pouch
Plastic tear-off posts (installed)
Hex wrench key
Finally, add the Competition Motorsport Performance Racing Helmet Bag to your order to keep your new Bell GT6 Pro auto racing helmet safe and secure going to and from the track, and throughout each race weekend.
Bell
Bell GTX.3 Helmet SA2020
$799.95
Bell Racing GTX.3 SA2020 Helmet
With its refined, aerodynamic design and lightweight carbon composite shell, the Bell Racing Helmets GTX.3 Composite SA2020 helmet provides the best performance and pro features for open wheel, open compartment, karting, formula and dirt track racers. This Bell GTX.3 Composite SA2020 has an integrated shield and dual screen anti-fog (DSAF) visor with rear-facing vents which are ideal for these forms of racing, allowing for air exchange and unobstructed vision without worrying about dust and dirt.
Bell Racing GTX.3 Auto Racing Helmet Features
Snell SA2020 and FIA 8859-2015 homologation
Includes clear SE03 3mm DSAF shield (SV SE03/05 pivot system) with DSAF anti-fog insert
Sleek aero styling with integrated wing
Front chin bar Gurney ("duckbill") improves high-speed aerodynamic performance
Venturi airflow system lets fresh air in, hollow synthetic rubber gasket seal keeps dirt, water and dust out
High-strength, lightweight carbon-composite construction using new high-pressure molding system
Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection
Ultra-plush grey Comfort-Max FR® interior fabric wicks away moisture
Install integrated drinking tube and radio microphone systems with the integrated face piece channels
Multi-density foam interior and contoured cheek pads offer a professional fit
Standard-sized eye port
M6 terminal hardware and hex wrench for Head and Neck Restraint devices
Additional visor shields for the Bell Racing GTX.3 available here.
Add a Competition Motorsport Performance Racing Helmet Bag and keep your new Bell Racing GTX.3 racing helmet safe and secure throughout each race weekend.
Bell
Bell Racing Star Classic Vintage Helmet
$699.95
Bell Racing Star Classic Vintage Helmet
Reviving 1970s Formula One Heritage: The Bell Star Classic Racing Helmet
The Bell Star Classic harkens back to the famous Bell Star helmet design worn by Formula One drivers in the seventies. Fast-forward 50-odd years and Bell is re-launching this iconic helmet to the delight of true classic-car enthusiasts and historic-car racers around the world. The same shape as the iconic original Bell Helmets has been re-introduced while being fully updated to the latest safety standards of FIA 8859-2015 and Snell SA2020. By using the innovative modern production techniques and high-tech materials, Bell gives today's racing drivers a chance to experience the look of yesterday's pro driver heroes with modern comfort, safety, and features. Perhaps best of all is the stunning exterior in a specially-produced Bell Heritage White color with a gloss finish, complemented by the plush tan Comfort FR® interior.
Bell Star Classic Vintage Helmet Features and Design
Homologations: FIA 8859-2015 and Snell SA2020
Fiberglass composite shell
Exterior: Bell Heritage White
Interior: tan high-strength Comfort FR® fabric
Shield and pivot kit: clear Star Classic
Advanced single-density liner for excellent energy absorption and impact performance
M6 terminals for use with your FHR anchor attachment
Homologated for use with approved head-and-neck devices
Synthetic rubber gasket seal to prevent dirt and water entering the helmet
Dark Smoke shield available as an accessory
Sizes: Small through XL
For racers who refuse to compromise on style, comfort, or safety, the Bell Star Classic Helmet stands out as the ultimate helmet for circuit use.
Bell
Bell Racing MAG-10 PRO Helmet
$699.95
Bell Racing MAG-10 PRO Helmet
Introducing the MAG-10 PRO, a symbol of sophistication in the world of racing helmets. Crafted for those who seek a blend of modern aesthetics and high performance, this open-face helmet is tailored specifically for racetrack use. With its lightweight carbon-glass composite shell, it promises not only durability but also a feather-light feel. The adjustable peak, paired with a newly integrated adjustable sunscreen, ensures you're shielded from both glare and debris. Prioritizing comfort, the MAG-10 PRO offers a snug professional fit, making it the preferred choice for racers who demand a premium open-face helmet for circuit racing.
Bell MAG10-Pro Helmet Features & Options:
Design & Material: Open-face design with a lightweight Premium carbon-glass composite shell.
Safety & Impact Protection: Advanced multi-density, multi-piece liner ensures maximum energy absorption.
Sun Protection: Adjustable sun peak and integrated anti-scratch dark smoked sunscreen (M10S-Short).
Comfort: Removable cheek pads crafted from advanced multi-density materials.
Additional Features: Factory-installed Hans anchors, a variety of adjustable sunscreens in different colors and lengths, and a sleek white finish.
Sizes & Certifications: Available in sizes ranging from 54 to 61+. Certified with FIA8859-2015 & SNELL SA2020 standards.
For racers who refuse to compromise on style, comfort, or safety, the MAG-10 PRO stands out as the ultimate helmet for circuit use.
In The Box of Your Bell Mag-Pro Helmet
MAG-10 PRO
M10S-Short
HP Helmet Bag
Hans Anchors Installed
Bell
Bell BR8 Helmet SA2020
$699.95
Bell Racing BR8 Helmet SA2020
Designed for dirt track and other forms of off-road racing, the versatile Bell Racing BR8 can be used in multiple configurations including standard, left- or right-side forced air, left- or right-3/4 top forced air, or top forced air. Bell has developed an innovative system (the kit is included with the helmet) so racers can customize the BR8 to adapt to different forms of racing and seat configurations, providing the ultimate flexibility in one auto racing helmet model. The Bell Racing BR8 features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive visor seal that prevents shield fogging, and rear-facing venturi airflow vents to prevent dust from entering the helmet while still allowing forced air to flow in. The Bell Racing BR8 features a unique air chamber system that evenly distributes airflow around the head regardless of the top air configuration used. The helmet can be used with or without ear cups.
Bell BR8 Auto Racing Helmet Colors & Sizes
The Bell Racing BR8 helmet comes in Gloss White and Matte Black in the following sizes:
57-58cm
58-59cm
60cm
61cm+
Bell BR8 Auto Racing Helmet Details
Construction: Lightweight composite shell
Safety Technology: Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Comfort Technology: Integrated channels in face piece offer multiple options to install drink tube and radio system
Aero: +Includes front duckbill to enhance aerodynamic performance
Ventilation: Comes standard with rear facing vents that create a Venturi effect allowing air to exchange and circulate in the helmet white preventing dust and dirt from entering
Interior: Black High Strength/High Comfort FR Fabric
Colors: Gloss White or Matte Black
Homologation: Snell SA2020
Forced air kits available for aftermarket including quick lock (V10) and are fully compatible with Maglock
M6 terminals pre-installed for FHR/HANS anchor attachment
Additional Bell Racing BR8 Visor Shields Available Here
Add a Competition Motorsport Performance Racing Helmet Bag to your order and keep your new Bell Racing BR8 helmet safe and secure throughout each race weekend.
Bell
Bell GP.3 Sport Helmet SA2020
$699.95
Bell GP.3 Sport SA2020 Helmet
The Bell GP3 combines traditional Formula 1 styling, a versatile air intake system, a Double Screen Anti-Fog (DSAF) visor shield, and a lightweight carbon composite shell with leading-edge aerodynamic performance. A great option for open-wheel racers and karters who demand professional features, performance and comfort, the GP3 Sport gives you maximum ventilation and a clear view even in the toughest track conditions.
BELL GP.3 SPORT AUTO RACING HELMET FEATURES
Lightweight composite shell
Homologations: Snell SA2020 and FIA 8859-2015 approved
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Optical grade injection molded Double Screen Anti-Fog (DSAF) visor
Versatile ventilation system featuring lower front chin bar ventilation and upper manual lever air intake
Vents can be open or closed
Front duckbill (chin spoiler) for improved aerodynamic performance
Compatible with Bell’s rear spoilers, top gurney, and chin bar gurneys (available separately) for enhanced stability at high speeds
Integrated channels in face piece offer multiple options to install drink tube and radio system
M6 terminals for FHR anchor attachment, homologated for use with approved head and neck devices
Synthetic rubber gasket seal to prevent dirt and water entering the helmet
Shield and pivot kit: SE03, SV(SE03/SE05)
ADDITIONAL HELMET SHIELDS FOR THE BELL GP.2 HELMET AVAILABLE HERE
BELL GP.3 SPORT AUTO RACING HELMET COLORS AN SIZES
Colors: White or Matte Black
Sizes: S, M, L, XL
Add a Competition Motorsport Performance Racing Helmet Bag and keep your new BELL GP.3 racing helmet safe and secure throughout each race weekend.
Bell
Bell Europe 500 TX Open Face Helmet
$599.95
Bell Europe 500 TX Open Face Helmet
New release of the 500 TX helmet
Designed in accordance with current FIA and Snell standards
Interior made of fire-resistant material
Removable sun-peak fitted
HANS clips are NOT included
Features and Design Bell Europe 500 TX Open Face Helmet
Colour: Heritage White
Material: fiberglass
Homologation:
FIA 8859-2015
Snell SA2020
