Side Brackets & Sliders

Sabelt Fixed Brackets For GT-635 Ferrari Challenge Seat This FIA 8862-2009 certified fixed (non-sliding) steel mounting bracket set is compatible with the Sabelt GT-635 Ferrari Challenge Racing Seat in both the M and L/XL sizes. Mounting bolts are included. For use with Sabelt GT-635 Ferrari Challenge Racing Seat.

Sparco ADV Prime Side Mount Brackets The Sparco ADV Prime Side Mount Brackets (004990ADV) are specifically designed and FIA-approved for use with the Sparco ADV Prime Carbon Racing Seats. These precision-engineered brackets ensure proper installation and homologation compliance with FIA 8862-2009 standards when mounting the ADV Prime and ADV Prime Competition Pad seats. Compatibility Compatible with Sparco ADV Prime Carbon Racing Seat | FIA 8862-2009 Compatible with Sparco ADV Prime Competition Pad Carbon Racing Seat | FIA 8862-2009 For use in competition vehicles requiring FIA 8862-2009 approved mounting systems FIA-Compliant Mounting Solution These side mount brackets are engineered from high-strength materials and tested to meet FIA 8862-2009 regulations. Proper use of the 004990ADV brackets is required to maintain the seat’s homologation. Featuring precise hole spacing and reinforcement for M12 mounting bolts, they ensure maximum rigidity and correct installation geometry. Features FIA-approved side mount brackets for ADV Prime seats Required for maintaining FIA 8862-2009 homologation High-strength steel construction for durability and rigidity Precise hole spacing for M12 mounting hardware (290 mm) Compatible with professional GT, Touring, Endurance, and prototype race vehicles Sparco ADV Prime Side Mount Brackets FAQs: Are these brackets required for FIA homologation? Yes. The 004990ADV brackets are the only mounts approved for use with Sparco ADV Prime seats under FIA 8862-2009. What seats do these brackets work with? They are specifically designed for the Sparco ADV Prime and ADV Prime Competition Pad Carbon Racing Seats. What size hardware is used? These brackets use M12 mounting bolts with 290 mm lateral spacing as required by FIA 8862-2009. Can I use aftermarket brackets? No. Using non-approved brackets voids FIA homologation and may compromise safety. Are these brackets vehicle-specific? No. They are universal for competition vehicles equipped with FIA-compliant mounting points. Pair your Sparco ADV Prime seat with the 004990ADV Side Mount Brackets to ensure a fully FIA-compliant installation and uncompromised safety performance on track.

Recaro XL Size Aluminum Side Mounts This Mount Set Fits the Following Seats: Recaro Pro Racer SPA XL Recaro Pro Racer SPG XL Recaro Profi SPA  XL Recaro Profi SPG  XL Recaro Pole Position Recaro Pole Position ABE FIA Approved Racing Seat Flexibility These Recaro Aluminum Sidemount brackets for the P 1300 GT advanced racing shell provide a lightweight, high-strength FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG XL, or Pole Position racing seat. Strong, rigid, and made specifically for your Recaro XL racing seat, these aluminum side mounts are for drivers who demand the highest quality in their safety gear. Sold in pairs. The Recaro aluminum side mounts can be used with Recaro Pole Position, ABE, Profi XL, Pro Racer SPA XL (FIA Certified) side mounted bucket seats or most other brands as well. Recaro Aluminum Side Mount Features: One pair of aluminum side mounts Lightweight, high-strength construction FIA certified For use with the Recaro Profi SPA/SPG XL, Pro Racer SPA/SPG XL, Pole Position, or Pole Position ABE racing seats

Easily Install OMP HTE Seats In Your Porsche The Brey Krause R-9751 Driver-side Racing Seat Side Mount Bracket (for passenger-side, see R-9752) allows for the easy installation of OMP HTE Racing Seats into Porsche 996, 997, Boxster, and Cayman models using the OEM factory non-power sliders. It can also be used with BK's R-9044 assembly. Designed to keep the seat as low as possible, the four mounting positions provide a wide range of recline options. An inboard threaded seat belt mount is integrated into the adapter. Brey Krause R-9751 OMP HTE Seat Adapter Details Manufacturer: Brey Krause Manufacturer part no.: R-9751 Fitment: all Porsche 996, 997, 986, 987 models with non-power seats. Racing seat: fits OMP HTE Racing Seats. Material: 11 gauge, Type 304, stainless steel. Finish: powder coated black wrinkle-finish. Weight: 4.0 lbs. Note: Factory non-power (manual) slider assembly from the 996/986 (and some 997/987s) required for installation. Will not fit sliders with power option.

Recaro Podium Steel Side Mounts by CMS Performance THIS MOUNT SET FITS THE FOLLOWING SEATS: Recaro Podium Medium Recaro Podium Large PODIUM RACING SEAT MOUNTING These CMS Performance Steel Side Mount brackets for the Recaro Podium seat fits both the medium and large size seats.  Strong, rigid, and made specifically for your Recaro Podium seat, this simple side mount system is for drivers who demand the highest quality in their safety gear.   Sold as pair for one seat.The Recaro Podium steel side mounts by CMS Performance are designed to be used exclusively with Recaro Podium seats. RECARO PODIUM STEEL SIDE MOUNT DETAILS: Manufacturer: CMS Performance Manufacturer part no.: CMSP-SeatMount-Recaro-Podium-BLACK One pair of side mounts Steel construction For use with the Recaro Podium seats

Recaro Steel Side Mounts for the Pole Position N.G. FIA Approved Racing Seat Side Mounts These Recaro Steel Side Mount brackets for the Recaro Pole Position N.G. racing seat provide an FIA-approved mounting system for your Recaro seat. Strong, rigid, and made specifically for your Recaro, this simple side mount system is for drivers who demand the highest quality in their safety gear. Recaro Steel Side Mount Details Manufacturer: Recaro Manufacturer part no.: 7223825 One pair of side mounts Steel construction FIA certified For use with the Recaro Pole Position N.G. racing seat

Recaro Pro Racer/Profi Steel Side Mounts (XL Size) This Mount Set Fits the Following Seats: Recaro Pro Racer SPA XL Recaro Pro Racer SPG XL Recaro Profi SPA XL Recaro Profi SPG  XL Recaro Pole Position Recaro Pole Position ABE FIA Approved Racing Seat Flexibility These Recaro Steel Sidemount brackets for the P 1300 GT advanced racing shell provide an FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG XL, or Pole Position racing seat. Strong, rigid, and made specifically for your Recaro XL racing seat, this simple side mount system is for drivers who demand the highest quality in their safety gear. These Recaro universal steel side mounts can be used with Recaro Pole Position, Pole Position ABE, Profi XL, Pro Racer SPA XL (FIA Certified) side mounted bucket seats or most other brands as well. Check out the standard-size version here. Sold in pairs. Recaro Steel Side Mounts Details: Manufacturer: Recaro Manufacturer part no.: 7207450ANA One pair of side mounts Steel construction FIA certified For use with the Recaro Profi SPA/SPG XL, Pro Racer SPA/SPG XL, or Pole Position

Recaro Pro Racer/Profi Steel Side Mounts (Standard Size) This Mount Set Fits the Following Seats: Recaro Pro Racer SPA Recaro Pro Racer SPG Recaro Profi SPA Recaro Profi SPG FIA Approved Racing Seat Flexibility These Recaro steel side-mount brackets for the P 1300 GT advanced racing shell provide an FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG. Strong, rigid, and made specifically for your Recaro racing seat, this simple side mount system is for drivers who demand the highest quality in their safety gear. This side mount system only works with the Recaro Pro Racer and Profi SPA/SPG standard-size seats. Check out the XL version here. Sold in pairs. Recaro Steel Side Mount Details: Manufacturer: Recaro Manufacturer part no.: 360942 Contents: one pair of side mounts Material: steel Homologation: FIA certified For use with the Recaro Profi SPA/SPG and Pro Racer SPA/SPG racing seats

Recaro Seat Slider Outside Bar Without Tabs Double locking slider kit with outside release actuator without tabs Recaro Locking Sliders are made of high quality materials, offering strength and peace-of-mind when installing a Recaro or other seat in your vehicle. The mechanism is actuated by a steel bar outside of the two seat rails. This bar is attached directly to the release mechanism, giving you a direct feel on the seat release. It's a much more positive system than traditional mushy cable releases. For use with Recaro Ergomed ES. Recaro Seat Slider Features: Right hand & left hand tracks with 220 mm of fore/aft travel M6x20mm bolts to secure the upper track to the seat frame M8x20 hex head bolts and/or 4 M8x20 Allen bolts to secure the lower track to an adapter/base frame/floor structure Washers for the bolts are included Kit includes outside release bar without tabs What's In The Box? (1) Right Hand Track(1) Left Hand Track(1) RH Track Cover(1) LH Track Cover(1) Outside release bar(6) M6x20mm Bolts(4) M8x20 Allen Head Bolts(6) Washers for M6 Bolts(4) Washers for M8 Bolts

Recaro Seat Slider No Tabs Inside Bar Double locking slider kit with inside release actuator without tabs Recaro Locking Sliders are made of high quality materials, offering strength and peace-of-mind when installing a Recaro or other seat in your vehicle. The mechanism is actuated by a steel bar between the two seat rails. This bar is attached directly to the release mechanism, giving you a direct feel on the seat release. It's a much more positive system than traditional mushy cable releases.For use with the Specialist, Expert, Classic seats. Recaro Seat Slider Features: Right hand & left hand tracks with 220 mm of fore/aft travel M6x20mm bolts to secure the upper track to the seat frame M8x20 hex head bolts and/or 4 M8x20 Allen bolts to secure the lower track to an adapter/base frame/floor structure Washers for the bolts are included Inside release lever What's In The Box? (1) Right Hand Track(1) Left Hand Track(6) M6x20mm Bolts(4) M8x20 Allen Head Bolts(6) Washers for M6 Bolts(4) Washers for M8 Bolts

Brey Krause R-9052 Porsche Race Seat Side Mounts The Brey Krause R-9052 Seat Side Mount Adapters are designed to help install a multitude of side-mounting racing seats directly to the factory manual sliders1 used on many Porsche 991 and 981 cars. (Porsche OEM sliders are not included.) They also fit some later 997 & 987 Porsches equipped with similar tabbed sliders. Porsche factory sliders are known for their quality and strength. Along with their longer travel versus aftermarket sliders, they help retain the factory feel in your car. Brey Krause's innovative design allows the side mounts to be installed in four different positions. Combined with included spacers, they are compatible with a multitude of racing seats that are between 390 and 430mm wide. Slightly slotted side-mounting holes allow for fitment to the most popular seat manufacturers (Sparco, Recaro, OMP, Cobra, and more). The R-9052 is compatible with the Brey Krause R-9259 sub strap mount (available as an option) for use with a five- or six-point racing harness. Brey Krause R-9052 Side Mount Bracket Details Made from 11-gauge T304 stainless steel Powder-coated in satin black Weight 5 lbs (2.3 kg) Fits all Porsche 991 & 981 cars with OEM manual seat sliders (also fits some late 997 & 987 cars with similar tabbed sliders)  Fits side-mount racing seats between 390-430mm wide Maintains factory seat belt mount Download installation instructions here 1 Porsche OEM manual seat sliders (not included) are required for seat installation. The R-9052 is not compatible with Porsche power seat sliders. Not compatible with race seat sliders.

Racetech RT1009M Aluminum Side Mounts Lightweight and Strong Racing Seat Side Brackets Racetech mill-finish 5mm (5083 grade) aluminum brackets for side-mounting a racing seat. Five slots and five holes in each bracket provide plenty of height and tilt adjustment for the optimal driving position. Sold as a pair. Racetech RT1009M Brackets Fit the Following Seats: RT4009, RT4009W RT4009HR, RT4009THR, RT4009WHR, RT4009WTHR RT4100, RT4100WT, RT4100HR, RT4100WTHR RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR RT4129HRW, RT4129WHR, RT4129WTHR RT9009, RT9009HR RT9119HR, RT9119THR, RT9119WTHR RT9129HRW, RT9129THR, RT9129WHR, RT9129WTHRL Racetech RT1009M Specs and Details: Weight: 2.74 lbs (1.24 kg) per pair Materials: 5mm 5083 aluminum alloy Seat hole spacing: nominal 295mm; min 290mm; max 300mm

Sparco HD Aluminum Side Mount Seat Brackets Far and away our most popular side mount seat bracket, the Sparco HD Aluminum seat mounts have multiple side holes making it easy to customize your seating position. The Sparco HD Aluminum side mounts have the added benefit of being able to mount with the legs facing either in or out, giving you more vehicle mounting options. These heavy duty side mounts are larger than the standard Sparco aluminum side mounts. All aluminum construction makes them lightweight, with an anodized silver finish for durability. Sparco HD Aluminum Side Mount Details Manufacturer: Sparco Manufacturer part no.: 004903 Material: aluminum Finish: anodized silver Weight: 3.4 lbs (1.5 kg) per set Multiple mounting positions Reverse mount option

Sparco QRT-R Side Mount Seat Brackets Sparco QRT-R side mounts are specifically designed for the QRT-R and other QRT performance seats. These QRT side mounts are designed for the unique bottom shape of QRT seats. Multiple side holes allow your QRT seat to be mounted low in the vehicle and with the proper amount of recline or rake. Available in black. Sparco QRT-R Side Mount Details Manufacturer: Sparco Manufacturer part no.: 600QRT, 600QRTAL Material: steel or aluminum Weight: 6.5 lbs per set (steel), 3.2 lbs per set (aluminum) Designed for unique QRT bottom shell shape Allows for low mounting in vehicle and proper recline or rake