GiroDisc Racing Brakes & Technologies
A2-206 Girodisc 2pc Brake Rotors | McLaren 600LT & 720S (Rear)
$1,995.00
Girodisc McLaren 390mm Rear Rotors
These Girodisc 2-piece front rotors are a direct replacement for McLaren applications equipped with 390 mm front brakes. They reduce unsprung weight and improve cooling for repeatable performance on street and track.
A1-206 Vehicle Fitment
McLaren 600LT
McLaren 720S
Lightweight, High-Performance Rotor Assemblies
The rotor rings are machined from proprietary high-carbon iron to Girodisc specifications for durability and thermal stability. The 48 curved vanes act as a centrifugal pump, pulling air through the hub for excellent cooling under heavy braking. The serviceable two-piece design allows the aluminum hats to be reused with front replacement rings (D1-206).
A1-206 Features
Direct OEM replacement, no modifications required
2-piece floating rotor assemblies reduce unsprung weight
High-carbon iron rings for consistent braking performance
48 curved vanes for efficient cooling
Reusable 6061-T6 aluminum hats with black anodized finish
Manufactured and assembled in Bellingham, WA
Girodisc McLaren 390mm Front Rotors FAQs:
Are these rotors a direct fit? Yes, they bolt on with factory calipers and hardware for 390 mm front brake applications.
Do they work with OEM pads? Yes, and they are compatible with performance pad compounds.
Can I reuse the hats when the rings wear out? Yes, use D1-206 front replacement rings.
Are these suitable for track days? Yes, they are designed for repeated heat cycles with strong cooling.
Related Products
A1-206 Girodisc McLaren 390mm Front Rotors
D2-206 Girodisc McLaren 390mm Rear Replacement Rings
D1-206 Girodisc McLaren 390mm Front Replacement Rings
GiroDisc Racing Brakes & Technologies
D2-357 Girodisc Nissan Skyline GT-R (R32/33/34) Rear Replacement Rings
$600.00
Girodisc Nissan Skyline GT-R (R32 V-Spec, R33, R34) Rear Replacement Rings
These Girodisc D2-357 rear replacement rings are sold in pairs and include all necessary replacement hardware. They are designed to work exclusively with Girodisc aluminum hats. The hats are the only components that should be reused during installation. These rings are not compatible with OEM or other aftermarket hats.
Vehicle Fitment
• Nissan Skyline GT-R R32 V-Spec (Rear)• Nissan Skyline GT-R R33 (All models – Rear)• Nissan Skyline GT-R R34 (All models – Rear)
Serviceable Design, Track-Ready Materials
Machined from proprietary high-carbon iron castings formulated to Girodisc’s specifications, these replacement rings deliver excellent thermal stability and wear resistance under high-performance driving conditions. The 2-piece rotor design allows you to refresh the braking surface while retaining the original Girodisc hats, making maintenance both cost-effective and performance-oriented.
Features
• Sold in pairs with replacement hardware• Designed exclusively for Girodisc aluminum hats• Proprietary high-carbon iron rings for consistent braking• Cost-effective way to refresh worn rotors• High-quality construction made in the USA
Girodisc Nissan Skyline GT-R (R32 V-Spec, R33, R34) Rear Replacement Rings FAQs:
Do these include new hardware? Yes, all necessary replacement hardware is included with the rings.
Can these rings be used with OEM hats? No, they are only compatible with Girodisc aluminum hats for proper fit and safety.
Are these rings sold individually? No, they are sold in pairs.
What is the correct part number for the rear replacement rings? D2-357 is the part number for Nissan Skyline GT-R rear applications.
GiroDisc Racing Brakes & Technologies
D1-357 Girodisc Nissan Skyline GT-R (R32 V-Spec, R33, R34) Front Replacement Rings
$650.00
Girodisc Nissan Skyline GT-R (R32 V-Spec, R33, R34) Front Replacement Rings
These replacement rings are designed for the Nissan Skyline GT-R R32 V-Spec, R33, and R34 front brakes. They are sold as rings only and are intended to be used with Girodisc aluminum hats. For correct fitment and performance, do not use with OEM or other aftermarket hats.
D1-357 Vehicle Fitment
• Nissan Skyline GT-R R32 V-Spec (Front – 324mm)• Nissan Skyline GT-R R33 (All models – Front)• Nissan Skyline GT-R R34 (All models – Front)
Track-Proven Materials, Serviceable Design
The rotor rings are machined from a proprietary high-carbon iron casting formulated to Girodisc’s specifications for durability and heat resistance. The 48 curved vanes act as a centrifugal pump, drawing cooling air through the hub to manage temperatures under hard use. The serviceable two-piece design lets you reuse your Girodisc hats and refresh braking performance by installing new rings (part number D1-357) when the originals wear out.
D1-357 Features
• Replacement rings only; reuse your existing Girodisc hats• Proprietary high-carbon iron for consistent performance• 48 curved vanes for efficient cooling under track conditions• Direct fit for Girodisc two-piece front rotors on R32 V-Spec, R33, R34 GT-R• Typical spec: 324mm diameter, 30mm nominal thickness• Recommended replacement thickness: 28mm
Girodisc Nissan Skyline GT-R (R32 V-Spec, R33, R34) Front Replacement Rings FAQs:
Do these include hats or hardware? These are rings only and are intended to be used with existing Girodisc hats. Hardware kits may be sold separately depending on your previous kit; contact us if you need hardware.
Can I use these with OEM Nissan or other aftermarket hats? No. These rings are engineered specifically for Girodisc hats to ensure proper fit and performance.
What is the recommended replacement thickness? Replace the rings at 28mm or if cracks propagate to the edge of the ring.
GiroDisc Racing Brakes & Technologies
A2-357 Girodisc Nissan Rear Rotors
$1,100.00
Girodisc Nissan Skyline GT-R (R32 V-Spec, R33, R34) Rear Rotors
These Girodisc 2-piece rotors are a direct replacement for the Nissan R32 V-Spec, R33, and R34 Skyline GT-R rear brakes. Fitment note: these rotors require the backing plates on the rear pads to be trimmed flush to the pad material. Please contact us if you have any questions or if you would like to buy pre-trimmed pads.
Vehicle Fitment
• Nissan Skyline GT-R R32 V-Spec (Rear)• Nissan Skyline GT-R R33 (All models – Rear)• Nissan Skyline GT-R R34 (All models – Rear)
Lightweight, Race-Ready Rotor Assemblies
Weighing in at 15.8 lbs per rotor, these fully floating assemblies help shed unsprung weight and rotating mass from the rear axle. The rotor rings are machined from a proprietary high-carbon iron casting formulated to Girodisc’s specifications for durability and performance. The 48 curved vanes act as a centrifugal pump, pulling air in through the hub to effectively cool the rotors under hard use. The 2-piece design allows the aluminum hat to be reused with replacement rings (part number D2-357) when needed.
Features
• 2-piece floating rotor assemblies reduce unsprung weight• Proprietary high-carbon iron rings for superior heat capacity• 48 curved vanes for maximum airflow and cooling• Reusable 6061-T6 aluminum hats with black anodized finish• High-strength cadmium-plated steel drive pins• Fully manufactured and assembled in Bellingham, WA• Diameter: 300mm | Thickness: 22mm | Weight: 15.8 lbs per rotor• Minimum replacement thickness: 20mm
Girodisc Nissan Skyline GT-R (R32 V-Spec, R33, R34) Rear Rotors FAQs:
Do these rotors fit all R32 GT-Rs? These fit R32 V-Spec models only. They also fit all R33 and R34 GT-R models. Standard R32 GT-Rs require different rear rotors.
Do I need to modify my brake pads? Yes, the backing plates on the rear pads must be trimmed flush to the pad material. We can supply pre-trimmed pads if needed.
Can the hats be reused? Yes, the hats are designed to be reused with replacement rings (D2-357), making future maintenance more cost-effective.
When should I replace the rings? Replace them when thickness reaches 20mm or if cracks extend to the edge of the ring.
Related Products
Girodisc D2-357 Replacement Rear Rotor Rings – Nissan Skyline GT-R (R32 V-Spec, R33, R34)
Girodisc D1-357 Replacement Front Rotor Rings – Nissan Skyline GT-R (R32 V-Spec, R33, R34)
Girodisc A1-357 Front Rotors – Nissan Skyline GT-R (R32 V-Spec, R33, R34)
GiroDisc Racing Brakes & Technologies
A1-357 Girodisc Nissan Front Rotors
$1,100.00
Girodisc Nissan Skyline GT-R (R32 V-Spec, R33, R34) Front Rotors
These Girodisc 2-piece rotors are a direct replacement for the Nissan R32 V-Spec, R33, and R34 Skyline GT-R models. Fitment note: these are the 324mm front rotors found on R32 V-Spec cars, as well as all R33 and R34 GT-Rs. Designed to reduce unsprung weight and rotating mass, they deliver improved performance on both street and track.
A1-357 Vehicle Fitment
• Nissan Skyline GT-R R32 V-Spec (Front – 324mm)• Nissan Skyline GT-R R33 (All models – Front)• Nissan Skyline GT-R R34 (All models – Front)
Lightweight Performance with Racing Pedigree
The rotor rings are machined from a proprietary high-carbon iron casting formulated to Girodisc’s specifications. This superior metallurgy enhances durability and heat resistance, while the 48 curved vane design acts as a centrifugal pump to draw air through the hub for exceptional cooling under heavy braking. The 2-piece design allows the aluminum hat to be reused with replacement rings (part number D1-357) when needed.
A1-357 Features
• 2-piece floating rotor assemblies reduce unsprung weight• Proprietary high-carbon iron rotor rings for superior performance• 48 curved vanes for maximum cooling efficiency• Reusable 6061-T6 aluminum hat with black anodized finish• High-strength cadmium-plated steel drive pins• Fully manufactured and assembled in Bellingham, WA• Diameter: 324mm | Thickness: 30mm | Weight: 16.5 lbs per rotor• Minimum replacement thickness: 28mm
Girodisc Nissan Skyline GT-R (R32 V-Spec, R33, R34) Front Rotors FAQs:
Will these rotors fit all R32 GT-Rs? These rotors fit R32 V-Spec models only, as well as all R33 and R34 GT-Rs. They do not fit standard R32 GT-R front brakes.
Are these rotors a direct bolt-on? Yes, they are a direct replacement for the factory rotors with no modifications required.
Can the hats be reused when the rings wear out? Yes, the 2-piece design allows you to reuse the aluminum hats and simply replace the rotor rings with part number D1-357.
What is the recommended replacement thickness? Girodisc recommends replacing the rings when they reach 28mm thickness or if cracks extend to the edge of the ring.
Related Products
Girodisc D1-357 Replacement Front Rotor Rings – Nissan Skyline GT-R (R32 V-Spec, R33, R34)
Girodisc A2-357 Rear Rotors – Nissan Skyline GT-R (R32 V-Spec, R33, R34)
Girodisc D2-357 Replacement Rear Rotor Rings – Nissan Skyline GT-R (R32 V-Spec, R33, R34)
GiroDisc Racing Brakes & Technologies
Lotus Emira Front Caliper Rebuild Kit
$33.60
Lotus Emira Rear Caliper Rebuild Kit
Been to a few too many track days? If your rear calipers are feeling sticky or weak, this kit replaces the hard-worked piston seals and dust boots to get them operating like new.
Fitment
Lotus Emira rear caliper. If you are unsure about compatibility, compare your caliper’s piston count and dimensions to your factory service information.
Refresh your rear braking performance with a precise, track-tested kit
Each kit services one front caliper and includes new piston seals and high-temperature dust boots built to our spec. Pair rebuilt calipers with titanium pad shields to reduce heat transfer and extend service intervals.
CCRK2-388 Features
One kit services one front caliper
Includes piston seals and dust boots made to our specifications
Designed to withstand high brake temperatures common on track
Restores caliper feel, consistency, and pad release
Recommended with titanium pad shields for added heat protection
What’s included
Piston seals and dust boots sufficient to rebuild one Lotus Emira rear brake caliper.
Fitment
Lotus Emira front caliper. If you are unsure about compatibility, compare your caliper’s piston count and dimensions to your factory service information.
Installation notes
Clean all components thoroughly; avoid scratching piston surfaces
Use appropriate brake assembly lube and fresh DOT-rated brake fluid specified by the vehicle manufacturer
After assembly, bleed the system and verify a firm, consistent pedal
Follow torque specs and procedures in the factory service manual
Lotus Emira Front Caliper Rebuild Kit CCRK2-388 FAQs
Does one kit cover both front calipers?
No. One kit services one caliper. Order two kits to service both rear calipers.
How do I know my caliper seals need replacement?
Common signs include uneven pad wear, dragging brakes, fluid seepage, a soft pedal, or pistons that don’t retract smoothly after braking.
Can I install this at home?
Experienced DIYers can rebuild calipers with the right tools and a service manual. If you are unsure, consult a professional technician.
Do I need new brake fluid after the rebuild?
Yes. Always use fresh fluid that meets the manufacturer’s specification and fully bleed the system after service.
Will titanium pad shields really help?
They reduce heat transfer from pads to pistons, helping protect seals and fluid, especially during repeated high-temperature track use.
Ready to restore consistent braking performance? Add the Lotus Emira Rear Caliper Rebuild Kit to your cart, and consider titanium pad shields to keep your system cooler on track.
GiroDisc Racing Brakes & Technologies
Lotus Emira Rear Caliper Rebuild Kit
$33.60
Lotus Emira Rear Caliper Rebuild Kit
Been to a few too many track days? If your rear calipers are feeling sticky or weak, this kit replaces the hard-worked piston seals and dust boots to get them operating like new.
Fitment
Lotus Emira rear caliper. If you are unsure about compatibility, compare your caliper’s piston count and dimensions to your factory service information.
Refresh your rear braking performance with a precise, track-tested kit
Each kit services one rear caliper and includes new piston seals and high-temperature dust boots built to our spec. Pair rebuilt calipers with titanium pad shields to reduce heat transfer and extend service intervals.
CCRK2-388 Features
One kit services one rear caliper
Includes piston seals and dust boots made to our specifications
Designed to withstand high brake temperatures common on track
Restores caliper feel, consistency, and pad release
Recommended with titanium pad shields for added heat protection
What’s included
Piston seals and dust boots sufficient to rebuild one Lotus Emira rear brake caliper.
Fitment
Lotus Emira rear caliper. If you are unsure about compatibility, compare your caliper’s piston count and dimensions to your factory service information.
Installation notes
Clean all components thoroughly; avoid scratching piston surfaces
Use appropriate brake assembly lube and fresh DOT-rated brake fluid specified by the vehicle manufacturer
After assembly, bleed the system and verify a firm, consistent pedal
Follow torque specs and procedures in the factory service manual
Lotus Emira Rear Caliper Rebuild Kit CCRK2-388 FAQs
Does one kit cover both rear calipers?
No. One kit services one caliper. Order two kits to service both rear calipers.
How do I know my caliper seals need replacement?
Common signs include uneven pad wear, dragging brakes, fluid seepage, a soft pedal, or pistons that don’t retract smoothly after braking.
Can I install this at home?
Experienced DIYers can rebuild calipers with the right tools and a service manual. If you are unsure, consult a professional technician.
Do I need new brake fluid after the rebuild?
Yes. Always use fresh fluid that meets the manufacturer’s specification and fully bleed the system after service.
Will titanium pad shields really help?
They reduce heat transfer from pads to pistons, helping protect seals and fluid, especially during repeated high-temperature track use.
Ready to restore consistent braking performance? Add the Lotus Emira Rear Caliper Rebuild Kit to your cart, and consider titanium pad shields to keep your system cooler on track.
GiroDisc Racing Brakes & Technologies
D2-388 Girodisc Lotus Emira Rear Replacement Rings
$830.00
Girodisc Replacement Rear Rotor Rings for Lotus Emira
D2-388 Vehicle fitment
• 2022+ Lotus Emira (rear axle)
When the time comes to service your Lotus Emira’s rear brakes, the Girodisc D2-388 replacement rotor rings restore full performance without the cost of replacing the complete assembly. Designed to mount directly onto your existing A2-388 hats, these rings deliver the same high-carbon iron strength, curved-vane cooling, and track-ready performance as your original Girodisc setup.
Durable, high-performance replacement rings
Each ring is machined from Girodisc’s proprietary high-carbon iron alloy, engineered for thermal stability and durability under repeated heavy braking. The 48 curved internal vanes work like a centrifugal pump to draw air through the hub, keeping temperatures down during demanding street or track use. Because the hats are fully reusable, you only need to replace the rings — saving money while keeping your braking system race-ready.
D2-388 Features
• Direct replacement rings for Girodisc A2-388 rear rotor assemblies• 350 mm diameter × 32 mm thickness• Proprietary high-carbon iron metallurgy• 48 curved-vane internal cooling design• Designed and manufactured in-house in Bellingham, WA• Reuses your existing Girodisc aluminum hats and hardware• Recommended minimum thickness: 30 mm
Note: These are rotor rings only. Hats and hardware are not included; designed for use with Girodisc A2-388 hats.
Frequently Asked Questions
Do these come with hats or hardware? No. The D2-388 kit includes rotor rings only. You’ll reuse your Girodisc A2-388 hats and hardware.
How do I know when it’s time to replace the rings? Replace them when thickness reaches 30 mm or when cracks extend to the edge of the ring.
Are these rings track-capable? Absolutely. They are built to handle repeated heat cycles while remaining compliant for street driving.
Do I need special tools for installation? Standard shop tools are sufficient, but careful torqueing is required. Professional installation is recommended if you are not experienced with brake assembly.
GiroDisc Racing Brakes & Technologies
A2-388 Girodisc Lotus Emira Rear Rotors
$1,350.00
Girodisc 2-Piece Rear Brake Rotors for Lotus Emira
A2-388 Vehicle fitment
• 2022+ Lotus Emira (rear axle)
Note: Confirm rotor diameter, hat spacing, and caliper clearance on the specific vehicle before purchase.
Upgrade the rear braking performance of your Lotus Emira with the Girodisc A2-388 2-piece rotor assembly. Engineered for both street and track use, these rotors help reduce unsprung mass and maintain the factory parking brake function while boosting thermal control under heavy braking.
Precision engineered for performance
The rotor rings are machined from a proprietary high-carbon iron casting designed by Girodisc. With 48 curved internal cooling vanes, the rotor acts like a centrifugal pump to pull air in through the hub, enhancing cooling even under aggressive use. The 2-piece design reuses the aluminum hat so you can replace just the rings (part number D2-388) when they wear.
A2-388 Features
• Direct replacement for OEM rear rotors on Lotus Emira• 350 mm diameter × 32 mm thickness• Proprietary high-carbon iron rotor rings• 48 curved-vane internal cooling design• 6061-T6 aluminum hats, black anodized finish• Fully floating design with drive pins, Belleville washers, and spring clips• Manufactured in-house in Bellingham, WA using domestic materials• Replaceable rings available separately (D2-388)• Service limit: minimum thickness 30 mm; replace if cracks reach ring edge
Service & Maintenance
• Replace rotor rings (D2-388) when thickness ≤ 30 mm or if cracks reach the edge.• Retain and reuse the Girodisc hats, pins, and hardware during ring replacement.• Always torque fasteners to manufacturer spec and follow proper bedding procedures.
Frequently Asked Questions
Does this retain the factory parking brake? Yes — the design preserves parking brake function.
Can I only replace rotor rings, not hats? Yes. The hat is reusable; the replacement rings are sold separately as D2-388.
Are these street-friendly? Yes. The floating design is engineered to operate quietly for street use while providing race-level performance.
When should I replace the rotor rings? When thickness reaches 30 mm or when cracks approach the ring’s edge.
Related Products
Girodisc A1-388 Front Rotors – Lotus Emira
Girodisc D1-388 Replacement Front Rotor Rings
Lotus Emira Rear Caliper Rebuild Kit
Lotus Emira Rear D2-388 Replacement Rings
Lotus Emira Front Caliper Rebuild Kit
Enhance your Lotus Emira’s rear braking stability, reduce fade, and maintain performance with Girodisc A2-388 rear rotors.
GiroDisc Racing Brakes & Technologies
D1-388 Girodisc Lotus Emira Front Replacement Rings
$880.00
Girodisc Replacement Rotor Rings for Lotus Emira / Evora 400–GT
When it’s time to refresh your braking system, the Girodisc D1-388 replacement rotor rings keep your setup performing like new. Designed to bolt directly onto your existing Girodisc A1-388 hats, these rings deliver the same high-carbon iron durability, cooling efficiency, and performance you expect from Girodisc, without the expense of replacing the entire assembly.
D1-388 Vehicle fitment
• 2022+ Lotus Emira (front axle)• 2017–2021 Lotus Evora 400 / 410 / 430 and 2020–2021 Evora GT (front axle)
Note: Fits Girodisc A1-388 hats only. These are rotor rings only, not a complete assembly.
High-carbon performance replacement rings
These rings are machined from Girodisc’s proprietary high-carbon iron formulation. The material composition maximizes durability and thermal stability under repeated heavy braking. With the 72 curved vane internal cooling system, the D1-388 rings continue to pull air through the hub to keep operating temperatures in check during intense track sessions.
D1-388 Features
• Direct replacement rings for Girodisc A1-388 assemblies• 370 mm diameter x 32 mm thickness• Proprietary high-carbon iron metallurgy• 72 curved vane internal cooling design• Designed and manufactured in-house in Bellingham, WA• Reuses your existing Girodisc aluminum hats and hardware• Recommended minimum thickness: 30 mm
Do these include hats or hardware? No. The D1-388 kit is rotor rings only. You’ll reuse your Girodisc A1-388 hats and hardware.
How do I know when it’s time to replace the rings? Girodisc recommends replacement at 30 mm thickness or when cracks extend to the edge of the ring.
Can I install these without special tools? Installation is straightforward but requires careful torqueing of fasteners. A professional shop is recommended if you’re not experienced with brake assembly.
Are these rings street-friendly? Yes. Like the original A1-388 rotors, these are designed to provide race-level performance while staying quiet and compliant for street driving.
Keep your braking performance sharp and cost-effective with Girodisc D1-388 replacement rotor rings for your Lotus Emira or Evora.
GiroDisc Racing Brakes & Technologies
A1-388 Girodisc Lotus Emira Front Rotors
$1,450.00
Girodisc 2-Piece Front Brake Rotors for Lotus Emira
Unlock sharper stopping power and reduced weight on your Lotus with the Girodisc A1-388 2-piece rotor set. Designed as a direct replacement upgrade, these fully floating assemblies shed unsprung mass, improve heat dissipation, and deliver consistent braking performance on the street and at the track.
A1-388 Vehicle fitment
• 2022+ Lotus Emira (front axle).• 2017–2021 Lotus Evora 400 / 410 / 430 and 2020–2021 Evora GT (front axle) — dimensionally matched 370×32 mm front setup and commonly cross-listed by reputable sellers; owners also report pad shape commonality between Emira and Evora 400.
Note: Always verify caliper/hat clearance and rotor dimensions on the specific vehicle before installation.
Lightweight, high-performance rotor engineering
Each rotor ring is precision-machined from a proprietary high-carbon iron casting. The 72 curved vanes act as a centrifugal pump to pull cooling air through the hub during repeated hard stops. With a reusable 6061-T6 aluminum hat and replaceable rings (D1-388), these rotors are engineered for longevity and lower long-term cost.
A1-388 Features
• Direct replacement for Lotus Emira OEM front rotors• 370 mm diameter x 32 mm thickness• Proprietary high-carbon iron rotor rings• 72 curved-vane internal cooling design• 6061-T6 aluminum hats, black anodized• Fully floating with high-strength drive pins, Belleville washers, and spring clips• Manufactured in-house in Bellingham, WA, from domestically sourced materials• Replaceable rings available separately. D1-388• Recommended minimum thickness: 30 mm
Related Products
Girodisc D1-388 Replacement Front Rotor Rings
Girodisc D2-388 Lotus Emira Rear Replacement Rings
Girodisc A2-388 Rear Rotors – Lotus Emira
Lotus Emira Rear Caliper Rebuild Kit
Lotus Emira Front Caliper Rebuild Kit
Service guidance
• Replace rings at 30 mm thickness or if a crack reaches the edge of the ring.• Reuse the Girodisc hats and hardware with D1-388 rings when service is due.
Upgrade your braking system with the Girodisc A1-388 2-piece rotors and experience improved response, reduced fade, and stable performance session after session.
Cobalt Friction Technologies, Inc.
Cobalt RC58 Brake Pads
from $515.00
Cobalt RC58 Racing Brake Pads (Rear)
Cobalt RC58 Fits The Following Vehicles:
Porsche 991 GT3 Cup Car (2013-2019)
Porsche 981/718 Cayman GT4 Clubsport (2016-2022)
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Cobalt Friction Technologies, Inc.
Cobalt RC57 Brake Pads
from $589.00
Cobalt Brake Pads Porsche RC57 Racing Brake Pads (Front)
Cobalt RC57 Fits The Following Vehicles:
Porsche 991 GT3 Cup Car (2013-2019)
Porsche 981/718 Cayman GT4 Clubsport (2016-2022)
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Ferodo Racing
Ferodo FRP3152G DS3.12 Brake Pads
from $615.00
Ferodo FRP3152GB DS3.12 Porsche 991 GT3 Cup Car Rear Brake Pads
Ferodo 11 FRP3152GB-N DS3.12 Porsche 991 GT3 Cup Car Rear Brake Pad Fitment:
Porsche 991 911 GT3 Cup Car (Rear)
Ferodo Brake Pad Compound DS3.12
The DS3.12 brake pad compound is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system.
Ferodo 11 FRP3152GB-N Comparison Chart
The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Out of all the pad compounds we've ever tested, from all manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same. This gives you tremendous consistency and repeatability.
Ferodo 11 FRP3152GB-N Coefficient of Friction (Mu) Chart
The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. In dyno testing, the Ferodo DS3.12 has shown superior wear rates compared to the other Ferodo compounds, while remaining kind to brake rotors.
Ferodo 11 FRP3152GB-N Temperature Chart
We believe the Ferodo DS3.12 will become the gold standard to which other race compounds will be compared.
Bell Racing Helmets
Bell HP10 Rally WW Helmet FIA 8860-2018
$2,999.95
Bell HP10 Rally WW Helmet
FIA 8860-2018
The Bell HP10 Rally WW FIA 8860-2018 auto racing helmet is the ultimate open-face carbon helmet designed for professional rally drivers who demand cutting-edge safety and seamless communication. Built on Bell‚ advanced FIA 8860-2018 carbon shell technology, it integrates the ZeroNoise Wired-Wireless (WW) system, giving drivers flawless communication whether connected by cable or over wireless. The system automatically switches between modes without interruption, delivering unmatched reliability in high-pressure competition environments.
Advanced Technology Meets Safety
The HP10 WW Rally combines lightweight comfort, FIA 8860-2018 homologation, and the most advanced communication system in rallying today. The ZeroNoise adaptive noise cancelling algorithm, wireless module, and heavy-duty Nexus connector are fully built into the helmet, eliminating bulky external devices and maximizing focus behind the wheel.
Bell HP10 Rally WW Helmet Features
FIA 8860-2018 Advanced ultra-lightweight carbon fiber shell with matte finish
ZeroNoiseWW (Wired-Wireless) communication system with automatic seamless switching
Adaptive noise cancelling technology for crystal-clear audio
Military-grade wireless module for fast and stable connectivity
Fast Removable Carbon Half Chin Bar (HCB) for quick emergency access
Multi-density, multi-piece liner for enhanced energy absorption
Adjustable carbon sun peak with anti-scratch integrated sunscreen
Supplied with ML Red mirror visor (installed) and Dark Smoke visor (included in box)
Removable multi-density cheek pads for customized comfort
Flexible, sound-insulating ear muffs for reduced cockpit noise
Heavy-duty integrated female Nexus connector, compatible with standard Nexus amplifiers
Flat right side carbon cover included for alternate straight-cable setup
Air extraction system for cooling efficiency
Factory-installed Hans anchors
HP helmet bag included
Bell HP10 Rally WW Helmet FIA 8860-2018 FAQs
What makes the Bell HP10R WW unique compared to other rally helmets? The HP10 WW integrates both wired and wireless communication directly into the helmet, with automatic switching and adaptive noise cancelling for crystal-clear team radio.
Does the HP10R WW come with multiple visors? Yes, it comes standard with an ML Red mirror visor pre-installed and includes a Dark Smoke visor in the box for variable light conditions.
Is the HP10R WW compatible with existing intercom systems? Absolutely. The heavy-duty female Nexus connector ensures compatibility with most professional-grade amplifiers and intercom setups on the market.
What safety certification does the HP10R WW carry? The helmet meets the FIA 8860-2018 standard, the highest current FIA homologation for motorsport helmets, offering maximum protection and performance.
Can the communication system be used outside the car? Yes, the WW system allows wireless communication both inside and outside the vehicle, making it highly versatile for team coordination.
Step into the future of rally communication and safety with the Bell HP10 Rally WW FIA 8860-2018 helmet. Order today and experience next-level performance on every stage.
Bell HP10 Rally WW Helmet Sizing Chart
Bell Racing Helmets
Bell HP6 RALLY Helmet FIA 8860-2018
$2,759.95
Bell HP6 Rally Helmet FIA 8860-2018
The Bell HP6 Rally Carbon is the flagship closed-face rally helmet designed for professional drivers demanding uncompromising safety, communication, and comfort. Certified to the FIA 8860-2018 standard, the highest level of motorsport helmet homologation‚the HP6 Rally delivers ultra-lightweight carbon construction, an extra-wide eyeport for improved visibility, and factory-installed ZeroNoise electronics for crystal-clear communication in high-noise rally environments.
FIA 8860-2018 approved for ultimate rally performance
Bell HP6 Rally Helmet FIA 8860-2018 Features
Advanced ultra-lightweight carbon fiber shell meeting FIA 8860-2018 standards
Closed-face design engineered for maximum safety and impact protection
Wide eyeport for extended field of vision, optimized for rally conditions
Integrated ZeroNoise electronics with high-quality speakers and noise-canceling microphone
Superior sound insulation to cut out engine and road noise for clearer communication
Efficient ventilation system for driver cooling and reduced fogging
Hans anchor points factory-installed for head and neck restraint systems
Fire-retardant, removable, and replaceable interior for comfort and easy maintenance
Designed for compatibility with professional intercom and communication systems
Why choose the Bell HP6 Rally Helmet?
The HP6 Rally Carbon represents the highest level of rally helmet technology available. Its FIA 8860-2018 homologation ensures maximum safety compliance, while its lightweight carbon shell reduces driver fatigue during long rally stages. With advanced ZeroNoise® communication electronics and soundproofing, the HP6 Rally keeps drivers and co-drivers fully connected and focused, even in the harshest rally environments.
Bell HP6 Rally Helmet FIA8860-2018 FAQs:
Is the HP6 Rally FIA approved? Yes, it is certified to the FIA 8860-2018 standard, the most rigorous helmet homologation in motorsport.
Does it include communication equipment? Yes, it comes with factory-installed ZeroNoise® electronics, including speakers and a noise-canceling microphone, optimized for rally intercom systems.
What makes the HP6 Rally different from other helmets? It combines FIA 8860-2018 safety with an ultra-lightweight carbon shell, wide eyeport, and superior integrated communication systems.
Who is this helmet designed for? Professional rally drivers and co-drivers competing at the highest levels who demand maximum safety and advanced technology.
Is it Hans compatible? Yes, Hans anchor points are pre-installed for use with head and neck restraint systems.
The Bell HP6 Rally Carbon FIA8860-2018 Helmet is the ultimate closed-face rally helmet—lightweight, strong, and fully equipped for communication. Order today and equip yourself with the highest level of safety and performance in rallying.
Bell HP6 Rally Helmet FIA 8860-2018 Size Chart
