Ferrari 488GTB/Spider

C3 Carbon Ferrari 488 GTB Carbon Fiber Rear Diffuser Replace the heavy, fragile fiberglass diffuser on the rear on your Ferrari 488 with a strong, lightweight, beautifully crafted carbon fiber rear diffuser from C3. The 488's heavy, drab-black factory diffuser belies the car's Formula 1 roots, adding unnecessary weight aft of the rear axles. Naturally, Ferrari offers a carbon fiber replacement -- for over $10,000! C3 Carbon uses an autoclave to create our pre-impregnated (pre-preg) dry carbon fiber 488 diffuser for uncompromising quality, fitment, and finish. All at a fraction of the cost of the Ferrari piece. C3 have perfectly matched the OEM Ferrari 1x1 3K plain carbon fiber weave to make a stunning diffuser that is functional, beautiful, and durable. A common complaint among 488 drivers is the factory diffuser being easily and irreparably damaged during everyday driving. Not only is the C3 Carbon rear diffuser more robust in this regard, but the fins are individually replaceable should one be scuffed or damaged. Not so with the Ferrari piece. FITS: 2016+ Ferrari 488 GTB FEATURES: Autoclaved pre-preg dry carbon fiber in a 1x1 3K plain weave identical to factory Ferrari carbon fiber Weighs 67% less than the original fiberglass Ferrari piece  Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit with ground clearance equal to the original factory diffuser Installs easily in minutes with no modification to your 488 Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Front Trunk C3 uses digital 3D laser scanning to ensure that their autoclaved, pre-impregnated (pre-preg) dry carbon fiber front trunk panels fit and function as perfectly as the factory pieces. The difference is C3 does it for a fraction of the cost of Ferrari carbon! C3 has matched the OEM Ferrari 1x1 3K plain weave for a perfectly factory Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. FITS: All 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave identical to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Rear Fog Light Cover Very cool carbon fiber rear fog lamp cover for your Ferrari 488 GTB or Spider. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber process results in a stunning piece that installs easily and fits perfectly, adding a dash of drama to the rear of your 488. C3 matches the factory Ferrari 1x1 3K plain weave for a perfectly original Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. Especially complementary to the C3 Carbon Fiber Rear Diffuser for the Ferrari 488. FITS: 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel FITS: 2016+ Ferrari F488 GTB Coupe only Stunning carbon fiber panel to add a bit of flair to your 488 GTB engine bay. This piece installs against the firewall under the glass backlight, replacing the stock flat-black plastic trim. C3 Carbon uses ultra-precise CNC-machined billet moulds to create this incredible pre-preg dry carbon fiber replacement with quality, fit, and finish equaling expensive factory Ferrari carbon pieces. C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship at a reasonable price. Installation is simple. This piece can be paired with C3 Carbon engine surrounds in the Engine Bay Carbon Kit for a stunning upgrade of your car's engine bay. FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds Stunning carbon fiber engine cover panels are an excellent upgrade for your 488 GTB! Ferrari displays the gorgeous 488 GTB V8 engine under a glass bonnet, but the stock flat-black plastic engine covers are a significant let down. C3 Carbon uses ultra-precise CNC-machined billet moulds to create incredible pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish equaling the incredibly expensive factory Ferrari carbon pieces! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship, but at a reasonable price. Straightforward installation makes this a favorite our 488 GTB customers. For the complete carbon treatment for your whole 488 GTB engine room, see our Complete 488 Engine Kit. FITS: 2016+ Ferrari F488 GTB Coupe (for Spider, click here). FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 Spider Carbon Fiber Engine Bay Stunning carbon fiber engine bay trim panels are a spectacular upgrade for your 488 Spider! Ferrari displays the 488 Spider's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic engine trim is a significant let down. C3 Carbon uses an autoclave to mould pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish that rival the factory carbon upgrade (for which Ferrari charges a fortune), bringing the 488 Spider engine room up to standard! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Straightforward installation makes this a very popular upgrade for our 488 Spider customers. FITS: 2016+ Ferrari F488 Spider FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Engine Oil/Latch Cover Stunning carbon fiber engine accessory cover sits front and center in your 488 engine bay. Ferrari displays the 488's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic oil fill/latch cover (front-and-center under the bonnet) is a significant let down. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber replacement fits and functions as perfectly as the factory piece (for which Ferrari charges a fortune) and brings the 488 engine bay up to standard. C3 matched the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Easy installation makes this a must-have for any 488 owner. FITS: 2016+ Ferrari F488 GTB and Spider FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Door Sills Gorgeous carbon fiber door sill plates for your Ferrari 488 GTB or Spider. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber Sill Plates install easily and fit perfectly, bringing you the beauty of carbon fiber every time you step into your 488. C3 matches the OEM Ferrari 1x1 3K plain weave for an original Ferrari factory appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. FITS: 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari California Carbon Fiber Engine Bay   Alright, racing enthusiast,Just when you were soaking in all the admiring glances for your Ferrari California on the track, we're about to dial up your car's charisma to a whole new level. Introducing the carbon fiber engine bay trim panels, meticulously crafted to make your engine bay (and honestly, your heart) absolutely swoon! We all adore how Ferrari masterfully showcased the California's V8 marvel beneath that pristine glass bonnet. But let's have a real chat - that stock black plastic engine trim? It's like wearing socks with sandals at a fashion show. Unexpected and a tad out of place. But worry not, because C3 Carbon is all set to change the narrative. Unveiling The C3 Carbon Magic: Authentic Ferrari Vibes: By replicating Ferrari's iconic 1x1 3K plain weave, we're offering the sheer elegance and charisma of an authentic Ferrari accessory, but without making your wallet cry rivers. Easy-Peasy Installation: Think of it as a snap-on accessory for your engine. Our installation process is so straightforward, it'll feel like child's play. Customized Just for You: Created and tailored exclusively for the Ferrari California, ensuring that it nestles in perfectly, as if it was always meant to be there. Still Not Convinced? Here's More: Showroom Shine: Thanks to our painstakingly hand-polished, automotive urethane clear coat, your engine bay won't just gleam; it'll dazzle and command attention wherever you go. Precision at Its Peak: Our digitally 3D laser scanned designs ensure a seamless fit, making it feel like the very essence of perfection. Built Like a Tank: With our dedicated crafting process in billet aluminum molds, combined with rigorous conditioning, this isn't some flimsy piece of decor; it's a robust upgrade that's here to stay. The C3 Carbon Promise: In the adrenaline-pumping universe of racing and roaring engines, C3 Carbon stands tall as a beacon of quality and unmatched style. While others might attempt to bait you with cheaper, inferior options, our unwavering commitment to top-tier quality, durability, and sheer panache sets us apart. Our avant-garde manufacturing techniques and dedication to sourcing only the best materials promise you're driving away with nothing short of the best.  Note does not include Airbox