CMS Performance

CMS Performance Lap Belt Mounts for Subaru WRX Secure Racing Harness Lap Belt Mounting for Your Subaru WRX The CMS Performance Lap Belt Mounts for Subaru WRX provide strong, dedicated mounting points for the lap belts of your racing harness while retaining the factory seats and normal seat operation. Designed specifically around the Subaru WRX seat mounting system, the CMS Performance Lap Belt Mounts install beneath the factory seat slider tracks using the vehicle's existing seat mounting locations. No drilling, cutting, welding, or permanent modification to your WRX is required. The Right Way to Mount Harness Lap Belts in Your Subaru WRX A properly installed racing harness requires strong and correctly positioned mounting points. The CMS Performance Subaru WRX Lap Belt Mounts eliminate the need for improvised mounting solutions by providing dedicated attachment points specifically for your harness lap belts. The mounts utilize the factory seat mounting locations beneath the seat slider assembly, creating a clean and secure installation while keeping the hardware tucked discreetly beneath the seat. 1/4-Inch Solid Carbon Steel Construction CMS Performance Lap Belt Mounts are manufactured from 1/4-inch solid carbon steel and feature fully TIG-welded harness mounting tabs for exceptional strength and rigidity. Each mount is finished in a durable satin black powder coat that protects the steel and allows the hardware to blend cleanly into the Subaru WRX interior. 1/4-inch solid carbon steel construction Fully TIG-welded harness mounting tabs Dedicated racing harness lap belt mounting points Durable satin black powder-coated finish Low-profile vehicle-specific design True Bolt-In Installation With No Drilling The CMS Performance Subaru WRX Lap Belt Mounts install using existing factory seat mounting locations and hardware. There is no need to drill holes through the chassis, cut the interior, or weld mounting plates into the vehicle. The mounts can also be removed without leaving permanent modifications behind, making them an excellent option for street-driven WRXs that also see track use. Retains Factory Seat Adjustment The CMS Performance Lap Belt Mounts are engineered to integrate with the factory Subaru WRX seating system without sacrificing normal seat operation. Fits driver or passenger seat applications Maintains full fore/aft seat adjustment Maintains factory up/down seat adjustment Does not interfere with the OEM three-point seat belt Does not interfere with factory airbag hardware Installs beneath the factory seat slider tracks No drilling or cutting required Built for Street and Track Subaru WRXs For Subaru WRX owners participating in track days, HPDE events, time trials, autocross, or other motorsport activities, the CMS Performance Lap Belt Mounts provide a clean solution for adding dedicated racing harness mounting points while retaining the factory interior. The low-profile design keeps the mounts nearly invisible once installed while providing convenient attachment points when your racing harness is in use. Designed and Manufactured in the USA The CMS Performance Subaru WRX Lap Belt Mounts are designed, manufactured, TIG welded, and powder coated in-house in the USA. CMS Performance components are engineered specifically for motorsport applications with an emphasis on strength, vehicle-specific fitment, straightforward installation, and clean integration with the factory vehicle. CMS Performance Subaru WRX Lap Belt Mount Details Manufacturer: CMS Performance Product: Racing Harness Lap Belt Mounts Vehicle: Subaru WRX Construction: 1/4-inch solid carbon steel Welding: TIG-welded construction Finish: Satin black powder coat Installation: Bolt-in using factory seat mounting locations Seat Position: Driver or passenger Vehicle Modification: No drilling or cutting required Seat Adjustment: Retains full fore/aft and up/down adjustment OEM Compatibility: Does not interfere with factory seat belts or airbag hardware Manufacturing: Designed and manufactured in the USA Frequently Asked Questions What do the CMS Performance Subaru WRX Lap Belt Mounts do?They provide dedicated attachment points for the lap belt portion of a racing harness without requiring permanent modifications to the vehicle. Do the Subaru WRX Lap Belt Mounts require drilling?No. They install using the factory seat mounting locations and require no drilling, cutting, or welding to the vehicle. Can the mounts be installed on the driver and passenger sides?Yes. The mounts are designed for use with either the driver or passenger seat. Will I still be able to adjust my factory seat?Yes. The mounts are designed to retain normal fore/aft and up/down factory seat adjustment. Can I continue using my factory seat belt?Yes. The mounts are designed so they do not interfere with the OEM three-point seat belt or factory airbag hardware. Are these mounts for the lap belts or sub straps?These mounts are specifically designed to provide mounting points for the lap belt portion of a racing harness. A sub strap mounting solution is required separately when installing a harness with anti-submarine straps. Can the mounts be removed later?Yes. Because they utilize the factory seat mounting locations, the mounts can be removed without leaving drilled holes or other permanent modifications behind. Where are the CMS Performance Subaru WRX Lap Belt Mounts made?They are designed, manufactured, TIG welded, and powder coated in-house in the USA.

CMS Performance Lap Belt Mount for Mustang GT350/GT350R/S550 Secure Harness Lap Belt Mounting for Your Ford Mustang The CMS Performance Lap Belt Mount provides strong, properly positioned mounting points for racing harness lap belts in Ford Mustang GT350, GT350R, GT500, and S550 applications. Designed for use with the factory Ford Performance seating system, this bolt-in mount installs beneath the factory seat slider tracks using the vehicle's original seat mounting locations. No drilling, cutting, or permanent modification to the vehicle is required. Vehicle Fitment The CMS Performance Lap Belt Mount fits all variants of the following vehicles: Ford Performance Shelby GT350 (2015-2020) Ford Performance Shelby GT350R (2016-2020) Ford Performance Shelby GT500 (2021+) Ford S550 Mustang GT (2015-2023) Heavy-Duty TIG-Welded Steel Construction Built for serious track and motorsport use, the CMS Performance Lap Belt Mount is manufactured from heavy-duty solid carbon steel and fully TIG welded to create a rigid, secure structure for mounting your racing harness lap belts. The mount is finished in a durable satin black powder coat that blends cleanly into the interior and is nearly invisible once the seat is installed. True Bolt-In Installation The CMS Performance Lap Belt Mount attaches to the factory seat mounting points beneath the seat slider tracks and utilizes the original Ford seat mounting hardware. Installation requires no drilling, welding, or cutting and can be reversed without leaving permanent modifications behind. Maintains Factory Seat Function Unlike improvised harness mounting solutions, the CMS Performance Lap Belt Mount is engineered specifically around the factory Mustang seat system. Fits the driver or passenger seat Maintains full fore/aft seat adjustment Maintains factory seat height adjustment Does not interfere with the OEM three-point seat belt Does not interfere with factory airbag hardware Provides dedicated mounting points for racing harness lap belts Designed and Manufactured in the USA The CMS Performance Lap Belt Mount is designed, manufactured, TIG welded, and powder coated entirely in-house in the USA. Every mount is built specifically for motorsport applications where strength, proper harness positioning, vehicle compatibility, and clean installation are critical. CMS Performance Lap Belt Mount Details Manufacturer: CMS Performance Product: Racing Harness Lap Belt Mount Construction: TIG-welded solid carbon steel Finish: Satin black powder coat Installation: Bolt-in using factory seat mounting locations Seat Position: Driver or passenger side Vehicle Modification: No drilling or cutting required Seat Adjustment: Retains full fore/aft and up/down adjustment OEM Compatibility: Does not interfere with factory seat belts or airbag hardware Manufacturing: Designed and manufactured in the USA Frequently Asked Questions Does installation require drilling or cutting?No. The CMS Performance Lap Belt Mount installs using the factory seat mounting locations and original mounting hardware. Will the mount interfere with seat adjustment?No. The mount is designed to retain normal fore/aft and up/down seat adjustment. Can it be installed on the driver and passenger seats?Yes. The mount can be used on either the driver or passenger side. Can I continue using the factory seat belt?Yes. The mount is designed so it does not interfere with the factory three-point seat belt or associated airbag hardware. Is this the Sub Strap + Lap Belt Mount?No. This listing is specifically for the CMS Performance Lap Belt Mount. A combination Sub Strap + Lap Belt mounting solution is available separately for applications requiring both lap belt and anti-submarine belt mounting points. Where is the CMS Performance Lap Belt Mount made?It is designed, manufactured, TIG welded, and powder coated in the USA. ```

CMS Performance Harness Install Kit For GR Corolla This Product Fits The Following Cars: Toyota GR Corolla (2023+) Quick and Easy Installation of Harness Lap Belts in the GR Corolla The CMS Performance Harness Install Kit for the GR Corolla provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your GR Corolla. The kit is typically used along with the bolt-in CMS Performance Roll Bar for the GR Corolla. Together they give GR Corolla driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance GR Corolla Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance GR Corolla Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the GR Corolla, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the GR Corolla that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For Gen 6 Camaro This Product Fits The Following Cars: Chevrolet Camaro Coupe, all (2016+) Quick, Easy Installation of Harness Lap Belts in the Gen 6 Camaro The CMS Performance Harness Install Kit for the Gen 6 Camaro provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your Gen 6 Camaro. Each CMS Performance Gen 6 Camaro Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance Gen 6 Camaro Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the Gen 6 Camaro, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the Gen 6 Camaro without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-G6C Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For C8 Corvette This Product Fits The Following Cars: Chevrolet Corvette C8 Stingray & Z51 (2025+) Chevrolet Corvette C8 Z06 (2025+) Quick and Easy Installation of Harness Lap Belts in the C8 Corvette The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For C8 Corvette This Product Fits The Following Cars: Chevrolet Corvette C8 Stingray & Z51 (2020-2024) Chevrolet Corvette C8 Z06 (2023-2024) Quick and Easy Installation of Harness Lap Belts in the C8 Corvette The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C8 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For C7 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C7 (2014-2019) Chevrolet Corvette Z06, C7 (2015-2019) Quick and Easy Installation of Harness Lap Belts in the C7 Corvette The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette. Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C7 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Racing Seat Side Mounts CMS Performance Racing Seat Side Mounts provide a strong, the most highly adjustable solution for mounting compatible side-mount racing seats while also incorporating dedicated mounting points for your racing harness lap belts.  No other side mount allows for more adjustments than any other side mounts on the market Available in both Short and Tall versions, these mounts give drivers and builders the ultimate flexibility to fine-tune seat height, rake, and overall driving position while simplifying the installation of the lap portion of a multi-point racing harness. Integrated Racing Harness Lap Belt Mounting Points Unlike basic racing seat side brackets, the CMS Performance Side Mounts incorporate dedicated attachment points for the left and right lap belts of a compatible racing harness. This helps create a cleaner, more integrated seat and harness installation without requiring separate universal lap belt brackets. The lap belt mounting locations are built directly into the seat mounting system, keeping the attachment points close to the seat and helping provide proper harness routing across the driver's pelvis. Choose Short or Tall Side Mounts Short Side Mounts: The Short version features a compact profile for installations where less vertical mounting range is required. It is an excellent choice for lower seating positions and tighter cockpit installations. Tall Side Mounts: The Tall version provides additional vertical adjustment range, giving you more flexibility when setting seat height, seat rake, and overall driver position. CMS Performance Racing Seat Side Mount Features Available in Short and Tall versions Designed for compatible side-mount racing seats Integrated left and right racing harness lap belt mounting points Eliminates the need for separate universal lap belt mounting brackets in compatible installations Multiple seat mounting slots and adjustment positions Allows adjustment of racing seat height and rake Helps fine-tune driver seating position Strong, rigid construction for secure seat mounting Black finish for a clean motorsport appearance Ideal for track, race, and performance vehicle builds Dial In Your Racing Seat Position A properly positioned racing seat is critical for driver control, comfort, and harness fit. The CMS Performance Side Mounts provide numerous mounting positions to help position the seat correctly in relation to the steering wheel, pedals, roll bar or cage, helmet clearance, and harness system. The multiple horizontal and vertical mounting locations allow you to achieve a more customized seating position instead of being limited to only a few fixed mounting points. Short Side Mounts The CMS Performance Short Side Mounts are ideal when a compact mounting profile is preferred. They provide substantial adjustment for many racing seat installations while keeping the overall bracket height low. Compact side-mount profile Ideal for lower seating positions Great for tighter cockpit installations Multiple adjustment positions for seat rake and height Integrated racing harness lap belt mounting points Tall Side Mounts The CMS Performance Tall Side Mounts provide increased vertical mounting range for installations requiring additional height or a greater range of seat-angle adjustment. Taller side-mount profile Increased vertical adjustment range Greater flexibility when setting seat rake Ideal for custom seating positions requiring additional height Integrated racing harness lap belt mounting points Designed for Side-Mount Racing Seats These brackets are intended for compatible fixed-back racing seats that use side mounting points. They can be incorporated into a complete racing seat and harness installation using the appropriate vehicle-specific floor mount, seat base, or slider system. Always verify racing seat, harness, seat base, and mounting hardware compatibility before installation. Product Details Manufacturer: CMS Performance Product Type: Racing Seat Side Mounts Available Versions: Short or Tall Application: Compatible side-mount racing seats Harness Mounting: Integrated lap belt mounting points Adjustment: Multiple seat height, rake, and positioning options Finish: Black Use: Track, race, and performance vehicle applications Questions About CMS Performance Racing Seat Side Mounts Do these side mounts include racing harness lap belt mounting points?Yes. The CMS Performance Side Mounts incorporate dedicated mounting points for the left and right lap belts of a compatible racing harness. What is the difference between the Short and Tall versions?The Short version has a more compact profile for lower seating positions. The Tall version provides additional vertical adjustment range for installations requiring greater seat height or rake adjustment. Can I adjust the angle of my racing seat?Yes. The multiple mounting positions allow you to fine-tune both seat height and rake depending on your seat and installation. Will these fit every racing seat?They are designed for compatible side-mount racing seats. Always verify your specific racing seat's side-mount hole pattern before ordering. Do I still need shoulder and sub-strap mounting points?Yes. These side mounts provide lap belt mounting points. The shoulder belts and anti-submarine straps of a multi-point harness require their own appropriate mounting locations.

CMS Performance Full-Size Racing Gear Bag This large, high-end gear bag is designed to carry everything you need for a weekend at the race track. Its large main compartment can be divided to keep your racing gear, helmet/HANS, etc. separate from your casual wear. It also features an expandable waterproof compartment to keep dirty or damp items separate. It features a durable heavy-duty nylon exterior with a padded interior held closed with heavy duty zippers for years of use. The CMS Performance Large Racing Gear Bag has three zippered compartments: a main compartment large enough for a fire suit, gloves, shoes, helmet, HANS, and other accessories; a front pocket to hold smaller gear and racing accessories; and a zippered "hamper" compartment to keep dirty or damp items separate. Includes three velcro dividers and a padded shoulder strap to make toting everything you need for a race weekend easy and convenient. CMS Performance Large Racing Gear Bag Details Manufacturer: CMS Performance Manufacturer part no.: CMS-GearBag Material: heavy duty nylon Main Compartment: 30" x 16" x 15" (76cm x 41cm x 38cm) Front Compartment: 21" x 11" x 2" (53cm x 28cm x 5cm)

Porsche Carbon Bucket Seat Lap Belt Mounts Tired of paying a premium for Porsche harnesses?  Can't find the harness you want with the Porsche-specific bolt-in attachments?  Too much hassle to unbolt the lap belts after a track day?  Tired of driving to work sitting on your racing harness?  Us to, that's why we designed and manufactured the lap belt mounts that allow you to use a standard clip-in racing harness.  Simply clip them in while at the track and unclip them and store them in your CMS gear bag when you are not.  These Porsche Carbon Bucket Seat Lap Belt Mounts provide dedicated attachment points for clip-in lap belts of a racing harness when using Porsche OEM carbon bucket seats. The kit includes a pair of heavy-duty steel brackets designed to install at the seat mounting locations. Each bracket features an upright mounting tab that provides a secure and convenient attachment point for the left and right clip-in lap belts of your harness. Porsche Lap Belt Mount Features Designed for Porsche OEM carbon bucket seat applications Provides dedicated racing harness lap belt mounting points Heavy-duty steel construction Black protective finish Upright harness attachment tab Installs at the seat mounting location Helps simplify proper lap belt installation and routing Includes left and right mounting brackets Sold as a pair Designed for Racing Harness Installation Porsche factory carbon bucket seats are an excellent choice for track use, but adding a multi-point racing harness requires suitable mounting locations for each belt. These brackets provide dedicated attachment points for the lap portion of the harness without requiring the harness to be bolted to the carbon seat shell 3 point seat belt mounting points. The compact design keeps the mounting hardware close to the seat while providing a strong attachment location for compatible bolt-in or harness mounting hardware. What's Included 1 Left-side lap belt mounting bracket 1 Right-side lap belt mounting bracket Installation The brackets install at the Porsche seat mounting locations and provide an upright attachment point beside the seat for the harness lap belts. Always verify proper harness belt angles, hardware engagement, and mounting procedures according to the harness manufacturer's instructions. Questions About Porsche Harness Fitment? Are these mounts made from carbon fiber?No. The mounts are steel. “Carbon” refers to their intended use with Porsche carbon bucket seats. Are both sides included?Yes. The kit includes one left-side and one right-side lap belt mounting bracket for one seat. Do these mount directly to the carbon seat?No. They are designed to install at the seat mounting location rather than attaching directly to the carbon seat shell. What part of the harness do these mount?These brackets are designed to provide attachment points for the left and right lap belts of a multi-point racing harness. Do I still need other harness mounts?Yes. A complete harness installation may also require proper shoulder-belt and anti-submarine belt mounting points depending on the harness configuration.

CMS Performance Racing Tow Strap Mount for Porsche Fits the Following Cars: Porsche 981 (All) Porsche 718 (All) Porsche 982 (All) Note: does not fit Porsche 992, 997, 987, or earlier Porsches with RH threaded tow hooks. When the unexpected happens at the race track, your tow straps get your Porsche back in the game without skipping a beat. To do that, you need to have a super strong, rock-solid connection to your car. That's where CMS Performance Racing Tow Strap Mounts come in. American Made Performance That Moves You Forward The CMS Performance Tow Strap Mount is a lightweight but ultra-strong bracket to mount your fabric racing tow straps (which can be added to your order) to your Porsche1. CNC machined from American billet 7075-T6 aerospace-grade aluminum, these workhorse mounts won't deform under load when things go sideways and you need to be pulled back into the race. Designed to fit the front and rear tow hook receivers on popular race and track-day Porsche models, these mounts accept Sparco or Sabelt racing tow straps with a 15mm mounting hole. Key Features: Precision Engineering: Designed and machined in the USA with a racer’s mindset for maximum performance, safety, and simplicity. Lightweight Strength: Every gram saved matters when you’re chasing lap times and podiums. But you can't sacrifice strength. These mounts are CNC milled from 7075-T6 aerospace-grade aluminum. Built for Competition: Meets the standards serious racers demand on and off the track. Specifications: CNC milled in the USA from American-forged aluminum billet Length (tip of threads to base of mounting flange): Front, 5.50 in. (139.7 mm); Rear, 4.75 in. (120.7 mm) Diameter (main shaft): 0.75 in. (19 mm) Tow strap hole diameter: 15mm Mounting threads: Porsche DIN RND405 M20 x 1/8" High-performance 7075-T6 aerospace aluminum Track-tested durability Optimized for professional motorsports Includes Allen bolt and machined tow strap spacer FAQs: Can this mount be used on the street or is it track only?This product is specifically optimized for track and race environments, but it can be used on street cars as well. How does it compare to similar products?Designed for maximum performance and the extraordinary rigors of racing, this tow strap mount orients your tow straps correctly to maximize their strength and effectiveness, offering superior durability and functionality over typical alternatives. Why Buy From Competition Motorsport? We live racing. That means offering only track-proven gear, expert advice, and fast shipping so you’re never left waiting in the paddock. Let’s get you dialed in for success. 1 Racing tow straps can be added in the dropdown above.

Competition Motorsport Racing Helmet Case A Tough Helmet Tote That's Easy On Your Wallet The Competition Motorsport Racing Helmet Carrying Case is the ultimate companion for motorsport enthusiasts who prioritize durability and protection. Designed with uncompromising quality, this helmet tote is crafted using high-density polypropylene construction, ensuring unparalleled strength and reliability. The high-density polypropylene material is renowned for its exceptional resistance to impact, scratches, and weather. Whether you're traveling to the race track or storing your helmet1 in your trailer, this Competition Motorsport Racing Helmet Carrying Case will keep it shielded from any potential harm. It also features interior webbing that provides a secure, cushioned environment for your helmet. The interior webbing acts as a shock absorber, safeguarding your helmet from accidental drops or bumps. Meticulous Attention to Detail Racers Demand The Competition MotorsportHelmet Carrying Case was meticulously designed to accommodate a wide range of helmet sizes and styles. The spacious compartment ensures a comfortable fit for most full-face and open-face helmets, while the elastic webbing secures your gear in place to minimize movement during transportation. The comfortable rubberized handle and adjustable shoulder strap of the CMS Performance Racing Helmet Carrying Case provide multiple carrying options. Best Tote for Your Most Important Safety Gear Whether you're a professional racer, track day enthusiast, or a dedicated motorcycle rider, the Competition Motorsport Carrying Case is an indispensable accessory. Its high-density polypropylene construction, durability, and exceptional protective features guarantee that your helmet remains in pristine condition, ready for your next adventure. Experience peace of mind knowing your gear is well-protected, no matter where your journey takes you. Competition Motorsport Racing Helmet Carrying Case Details: Formed high-density polyethylene creates a firm, durable barrier to protect your helmet Thick rubber feet to stand Carrying Case upright Comfortable rubberized non-slip carrying handle Interior elastic straps secure your helmet regardless of size Convenient super-wide clam shell opening easily accommodates any size helmet Heavy-duty zipper and durable construction for years of hassle free use Competition Motorsport Racing Helmet Carrying Case Dimensions: 14" x 12" x 7" 36cm x 30cm x 18cm 1 Racing helmets pictured are sold separately.

CMS Performance Locking Harness Collars Harness collars are priced and sold individually. Order the quantity required for your installation. Keep your racing harness shoulder straps properly positioned with CMS Performance Locking Harness Collars. Designed specifically for CMS Performance roll bars and harness bars, these precision-machined aluminum collars clamp securely to the harness cross-bar to help prevent shoulder straps from sliding side to side during track use. Available for both 1.50-inch and 1.75-inch outside-diameter cross-bars, CMS Performance Harness Collars provide a clean, secure solution for maintaining consistent harness positioning behind the driver or passenger seat. Precision Machined for CMS Performance Roll Bars Each harness collar is CNC machined from lightweight aluminum and features a double-split clamping design that allows it to install around the cross-bar without removing the bar from the vehicle. High-strength Allen-head hardware securely tightens the collar around the tubing, while the satin black anodized finish provides corrosion resistance and a clean appearance that complements CMS Performance roll bars and harness bars. Helps Keep Harness Shoulder Straps Properly Located Proper shoulder-belt positioning is an important part of a racing harness installation. These locking collars install on either side of the harness shoulder straps to help limit unwanted lateral movement along the harness bar. Once positioned and tightened, the collars help keep the harness straps located where they were intended to sit instead of allowing them to migrate across the cross-bar. CMS Performance Locking Harness Collar Features Designed for CMS Performance roll bars and harness bars Helps prevent harness shoulder straps from sliding laterally Precision CNC-machined aluminum construction Double-split design allows easy installation around the cross-bar High-strength Allen-head clamping hardware Lightweight and durable construction Satin black anodized finish Available for 1.50-inch or 1.75-inch O.D. tubing Clean, professional appearance Product Specifications Manufacturer: CMS Performance Product: Locking Harness Collar Material: Aluminum Finish: Satin Black Anodized Available Sizes: 1.50-inch and 1.75-inch 1.50-Inch Part Number: RB-COLLAR-AL150-BLK 1.75-Inch Part Number: RB-COLLAR-AL175-BLK Hardware: Allen-head clamping bolts Quantity: Sold individually Choosing the Correct Size Select the collar size that matches the outside diameter of your harness cross-bar. 1.50-inch collar: For 1.50-inch O.D. tubing 1.75-inch collar: For 1.75-inch O.D. tubing Measure the outside diameter of your harness bar before ordering if you are unsure which size is required. Installation The double-split collar design allows installation without sliding the collar over the end of the bar. Separate the collar, position it around the harness cross-bar, reinstall the hardware, and tighten it securely in the desired location. Install collars on the appropriate sides of the harness shoulder straps to help maintain the desired belt position. Frequently Asked Questions Are the CMS Performance Locking Harness Collars sold as a pair?No. Harness collars are priced and sold individually. Order the quantity required for your installation. What sizes are available?The collars are available for 1.50-inch and 1.75-inch outside-diameter harness cross-bars. Will these fit CMS Performance roll bars?Yes. They are designed specifically to work with compatible CMS Performance roll bars and harness bars using 1.50-inch or 1.75-inch cross-bar tubing. What do harness collars do?Harness collars help limit side-to-side movement of the shoulder belts along the harness cross-bar so the straps remain positioned where intended. Do I need to remove the harness bar to install them?No. The double-split design allows the collar to be installed around the cross-bar without sliding it on from the end. What are the collars made from?They are CNC machined from lightweight aluminum and finished with satin black anodizing. SEO Title: CMS Performance Locking Harness Collars | 1.5 & 1.75 Inch Meta Description: Keep racing harness shoulder straps securely positioned with CMS Performance locking harness collars. CNC-machined aluminum for 1.50" and 1.75" harness bars.