CMS Brand

CMS Performance Roll Bar for Mustang S550/Shelby GT350/R/GT500 FITS: 2016+ Ford Shelby GT350 2016+ Ford Shelby GT350R 2015+ Ford Shelby GT500 2015+ Ford Mustang S550 (V6, EcoBoost, GT) HANDS DOWN BEST MUSTANG ROLL BAR The CMS Performance Mustang Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing our Mustang roll bar, safety, strength, and structural integrity were our primary goals. That's why it is fully TIG welded from ultra-strong Docol R8 Advanced High-Strength Steel sized 1.75" diam x .095" wall, vs. the mild-steel tubing others use. Docol R8 is 30-35% stronger than DOM mild steel and even 10-15% stronger than 4130 CrMo steel. This allowed us to design a roll bar that is stronger and lighter! Precision CNC machined interlocking roll bar clamps, made to our specifications in the USA, make joining the main hoop and kickers easier during installation while giving the CMS Performance roll bar a premium, finished look. Adding our optional Rear Seat Delete Kit (not necessary on the GT350R) gives your roll bar installation a from-the-factory OEM look. SAFETY FIRST Let's face it, safety is the primary reason to install a roll bar in the first place. So the CMS Performance Mustang Roll Bar is designed to place your harness shoulder straps at both the proper angle (0° to -20°) and distance to the driver.  The rear kickers bolt to a strong existing bulkhead, requiring no reinforcement plates beneath the floor pan. Our use of state-of-the-art Docol ultra-high-strength-steel tubing throughout allows us to keep the driver's rear view unobstructed by diagonal braces, which also keeps weight down. Every detail is engineered with safety and structural integrity as our primary goal. AMERICAN MADE, HAND-CRAFTED COOL The other reason to install a roll bar is because it really complements the aggressive, race-inspired styling of the Mustang S550 and Shelby GT350/R/500.  We get that.  So each bar is crafted by hand by master fabricators, TIG welded for the ultimate in durability, and custom powder coated in our facility (at no extra charge). We've color-matched powder to most of Ford's factory paint colors for a truly customized look, or you can choose from thousands of custom colors and finishes to give your car a personalized look that will last. Going from raw Docol tube stock to a gleaming finish, every roll bar is handcrafted by our most experienced cage- and race car builders. Nothing is left to chance. The CMS roll bar is designed to give you an unobstructed view through your rear window. None of your plastic interior trim needs to be removed or cut, just a little carpet that is hidden away. So if you ever need to put your car back to stock, it will look as though the roll bar was never there. GREAT INSTALL VIDEO HERE! Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy; having a buddy helps!) All the supplied installation hardware is American made: Grade 8 mounting hardware and an industrial carbide drill bit. So you don't have worry that you don't have what you need for a flawless installation. You can add four-point Schroth Profi II ASM Harnesses specifically designed for use in cars with no sub-strap cut-through in the seat (like the Mustang). Many customers also add CMS Locking Harness Collars to keep harness shoulder straps right where you want them (they're not required for safety, but a lot of people like the look!) ** Thanks so much to @1_trickpony_ for putting in the time and effort to shoot and edit such a fantastic installation video! ** Click Here For Installation Instructions ROLL BAR FEATURES: 1.75″ X .095" Docol R8 Advanced High-Strength Steel for superior strength and safety. Fully TIG welded for ultimate strength, integrity, and beauty. One-piece main hoop and three-piece rear kicker make installation simpler. Only 52 lbs. yet incredibly strong. CNC-cut mounting plates. Designed, built, and powder-coated by CMS in the USA. CNC machined high-strength steel interlocking clamps ease installation. Allows full seat travel with any seat. Straightforward install and perfect fitment, guaranteed. Includes all necessary hardware including carbide drill bit. Roll bar installation in the Mustang V6, EcoBoost, GT, Shelby GT350 & GT500 requires removal of the rear seats. An OEM rear-seat delete comes standard in the GT350R, although our rear seat delete saves you cutting up the OEM should you wish to save it. THIS PRODUCT IS INTENDED FOR OFF-ROAD USE ONLY

CMS Locking Roll Bar Harness Collars  Designed to fit all CMS bolt-in roll bars and harness bars Perfectly sized to fit all CMS roll bars with either 1.75"  or 1.50" harness cross-bars. Precision-machined roll bar harness collars help keep your harness shoulder straps in exactly the right place on your roll bar. Easy to install double-split collars with high-strength Allen bolt hardware, they are available in satin black powder-coated steel. FEATURES: Clamp tight to hold your shoulder straps firmly in position Keep harness shoulder straps located properly and precisely Satin black powder-coated steel Roll bar collars are priced individually

CMS Performance Racing Helmet Bag The perfect tote for your racing helmet, the CMS Performance Racing Helmet Bag makes it easy to carry this expensive piece of equipment safely. Features a durable, formed high-density polypropylene exterior with a soft interior held closed with heavy duty zippers for years of use. Not only does this help protect your helmet from damage during transport, it also eliminates the need to carry your helmet in hand, allowing you to carry more gear. Its large rubberized carrying handle gives you a comfortable, non-slip grip. ADDITIONAL FEATURES: Formed high-density polyethylene creates a firm, durable barrier to protect your helmet Thick rubber feet to stand bag upright Comfortable rubberized non-slip carrying handle Interior elastic straps secure your helmet regardless of size Convenient super-wide opening easily accommodates any size helmet Heavy-duty zippers and durable construction for years of hassle free use DIMENSIONS: 14" x 12" x 7" (36cm x 30cm x 18cm)

CMS Performance Bolt-In Roll Bar For Porsche 981 & 718 Cayman FITS: 2014-16 (981) Cayman Base, S, GTS, GT4 2017+ (718) Cayman Base, S, GTS, GT4 HANDS DOWN THE BEST ROLL BAR FOR YOUR CAYMAN The CMS Performance Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market for your Cayman. In designing our roll bar, safety and structural rigidity were our primary goals. That's why we use 1.75 x .095" Docol R8 Advanced High-Strength Steel tubing, much stronger than the smaller 4130 CrMo tubing others use. The harness cross-bar is designed to put your harness shoulder straps at the proper angle (0° to -20°) and distance to the driver, regardless of your seat position. Yet the CMS roll bar requires no cutting through the carpeted hump in the middle of your interior (replacing this carpet is expensive if you ever want to return your car to stock). This also provides an ideal mount for a SmartyCam video camera. ATTENTION TO DETAIL Our use of Docol R8 tubing throughout also lets us to keep the driver's rear view unobstructed by the rear diagonal bracing typically used to support weaker roll bars. This also gives you unfettered access to the engine cover without removing any part of your roll bar. Other roll bars require partial removal to get at your engine -- not ideal in a car that sees track time. The CMS roll bar's rear kickers bolt to the Cayman's rear shock towers, the safest, strongest possible mounting point. This adds rigidity to the chassis and suspension. The main roll hoop is mounted to the frame structure across the rear bulkhead for lighter weight and superior strength. CUSTOM POWDER COATING We'll powder coat your roll bar in a color custom-matched to Porsche's OEM color palette. Or you can go with our rich satin black for a more stealthy look. Every CMS roll bar is professionally powder-coated to order, in-house by Competition Coatings. Fully TIG welded by master welders using superior materials, the design, strength, fit, and finish of the CMS roll bar all add up to this: you can spend more on a roll bar, but you only get the best from CMS. SAVE ON HARNESSES Add six-point Schroth Enduro 2x2 GT4 , Schroth Flexi 2x2 GT4 , or Sabelt Silver Series GT4 , or four-point Schroth Profi II ASM GT4 harnesses to your order using our convenient pull-down menus above! These harnesses are specifically designed to bolt right up to your Porsche carbon lightweight bucket seats. (Porsche's passenger-side seat does not have a factory sub-strap pass through.) If you're installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mounts to your order. They provide a solid, properly located anchor for your anti-submarine straps, are easy to install. Click Here For Installation Instructions FEATURES: Main hoop and kickers 1.75 x .095" Docol R8 Advanced High-Strength Steel Fully TIG welded One-piece main hoop  Three-piece rear kickers make installation so much easier Easy engine access without removing any part of the roll bar No cutting of your central carpet Laser-cut mounting plates Designed, built, and finished by CMS in the US CNC machined high-strength-steel interlocking clamps to ease installation Easy to install and perfect fitment guaranteed Comes with detailed installation instructions and all necessary hardware OPTIONS: Pre-cut OEM Porsche interior trim for easier installation, preserving your original trim CMS Performance Sub Strap Mount THIS PRODUCT IS INTENDED FOR OFF-ROAD USE ONLY

CMS Performance Bolt-In Roll Bar for Porsche 991 GT3 / GT3RS / GT2RS FITMENT: 991.1 Porsche GT3 991.2 Porsche GT3 991.1 Porsche GT3RS 991.2 Porsche GT3RS 991.2 Porsche GT2RS THE BEST ROLL BAR FOR PORSCHE'S TRACK ANIMAL The CMS Performance 991 Roll Bar is the strongest, safest, and highest quality bolt-in roll bar on the market for your GT2RS, GT3 or GT3RS, period. In designing and building the CMS roll bar, safety and structural rigidity are our primary goals. That's why we fully TIG welded 1.75" Docol R8 Advanced High-Strength Steel tubing instead of the less-expensive but inferior 4130 CrMo others use. It's why we use the strongest chassis mounting points and cross-brace the main hoop. ATTENTION TO DETAIL The CMS roll bar places your safety harness shoulder straps at the proper angle (0° to -20°) and distance (as close as possible) to the driver, regardless of seat position. Our use of thicker Docol tubing and main-hoop cross bracing gives you an unobstructed rear view and safety superior to that of other products we've seen for sale. CMS rear kickers bolt to the 991's rear shock tower (where the factory racing roll cage mounts), the safest, strongest mounting points. This adds rigidity to the chassis and suspension. The main roll hoop is mounted to the steel frame structure beneath the vehicle just like the factory cage.   STRENGTH & BEAUTY Fully TIG welded by master welders and professionally powder-coated in-house, the structural integrity, fit, and finish of the CMS Performance roll bar is unsurpassed. We offer a full range of powder-coat colors to match your Porsche (including, of course, matte black if stealth is more your thing) all included in the price of the CMS roll bar. Superior engineering, design, quality, safety, and appearance at an affordable price, backed by our legendary customer service all add up to this: you can pay a lot more for a roll bar, but you'll only get the best from CMS. ADD HARNESSES! Add six-point Schroth Enduro 2x2 GT3 , Schroth Flexi 2x2 GT3 , or Sabelt Silver Series GT3 , or four-point Schroth Profi II ASM GT3 harnesses to your order with our convenient pull-down menus above. These harnesses are specifically designed to bolt right up to your Porsche carbon lightweight bucket seats. (Porsche's passenger-side seat does not have a factory sub-strap pass through.) If you're installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mounts to your order. They provide a solid, properly located anchor for your antisubmarine straps and are very easy to install. CLICK HERE FOR INSTALLATION INSTRUCTIONS FEATURES: 1.75 x .095 Docol R8 Advanced High-Strength Steel tubing for superior strength Full-penetration 360o TIG welding throughout One-piece main hoop and three-piece kicker make installation so much easier CNC-cut precision mounting plates CNC-machined steel interlocking clamps ease installation US-made Grade 8 hardware included Full seat travel with any seat Comes with detailed installation instructions & all necessary hardware for a seamless installation THIS PRODUCT IS INTENDED FOR OFF-ROAD USE ONLY

Anodized Aluminum Porsche GT3 Control Arm Shims For Porsche GT3 And Similar Two-Piece Lower Control Arms Precision laser-cut from 6061-T6 aluminum and anodized for durability, these shims are used to adjust camber by changing length of your Porsche OEM or similarly configured lower control arm (such as these RSS units). Thickness in millimeters is silk screened on each shim for easy sorting. One degree of negative camber is approx. 10mm shim. AVAILABLE SIZES: 1 mm 3 mm 5 mm PACKAGE SAVINGS: Enthusiast (two of each shim) save 10% Racer (four of each shim) save 15% Team (eight of each shim) save 20% These fit all two-piece Porsche lower control arms (except 991 GT3/GT3RS rear, which use a different shim shape). Shims are priced individually (other than packages). They are typically used in pairs or in multiple-shim combinations. Also fits 981 and 718 Cayman models. CMS Performance shims are used on FRONT and REAR of any Porsche 986/987/996/997 fitted with two-piece lower control arms (commonly referred to as "GT3" control arms) and ONLY FRONT of 991s with two-piece lower control arms.

CMS Performance Sub Strap Mount for Porsche LWB For cars with Porsche OEM CFRP Full Bucket ("Lightweight Bucket" or "LWB") Seats Only. FITMENT: 992 GT3/GT3RS 991.1 & .2 GT3/GT3RS 992 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 The CMS Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Lighweight Bucket Seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the CMS Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The CMS Performance Sub Strap Mount fits either driver- or passenger-side seats. CMS Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA.  Made of solid steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. CMS Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety. FEATURES: Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated to match OEM seat base Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware

Buy 6+, Save $1 per bottle Buy 12+, Save $2 per bottle REDESIGNED BOTTLE, SAME TOP-OF-THE-LINE BRAKE FLUID Competition Motorsport RF1 fully synthetic Racing Brake Fluid is formulated to provide the highest, most reliable performance under racing and track-day conditions, where braking systems operate at very high sustained temperatures. RF1 exceeds all DOT 3 & 4 requirements and is compatible with all DOT 3, 4, and 5.1 fluids. (Not compatible with DOT5 or mineral-based brake fluids.) There is perhaps no single safety system more important in racing than brakes. And no single part of that system is more critical than brake fluid. At Competition Motorsport, we got tired of (and a little nervous) using "racing" brake fluid on the track that didn't live up to its claimed performance when things got heated. So we did something about it. Manufactured in partnership with the brake fluid supplier to many teams in Formula 1, WEC, and many other professional series, RF1 Racing Brake Fluid is formulated to maintain consistent viscosity, lubricity, and compressibility at extreme temperatures and line pressures found in racing, track days, and spirited driving. Bottom line: you can spend more money, but you can't buy higher-performing racing brake fluid!   SPECIFICATIONS: Typical dry boiling point: 622° F (328° C) Typical wet boiling point: 399° F (204° C) Exceeds DOT3 & DOT4 standards Individual 500 ml (16.7 oz.) bottles   Click Here for Product MSDS Sheet All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!

CMS Tow Decal All professional sanctioning bodies require tow hooks on race cars if the roll cage is not easily accessible, and the tow hooks must be clearly marked for quick identification by safety crews. 3" by 2" Die-cut vinyl decal

CMS Performance Bolt-In Roll Bar For Gen 6 Chevy Camaro Fits 2016+ Chevy Camaro Coupe (all) STRONGEST ROLL BAR AVAILABLE FOR GEN 6 CAMARO The CMS Performance Camaro Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Camaro roll bar, safety, strength, and structural integrity were our primary goals. Fully TIG welded from Docol R8 Advanced High-Strength Steel  allows us to design a roll bar that is stronger and lighter! Our innovative design maximizes the room for the factory Recaro seats, meaning taller drivers can send their seat all the way back and still maintain a comfortable recline. Precision CNC machined solid steel interlocking roll bar clamps on the kicker mounting plates help make installation a snap. Free custom powder-coating gives you a premium, finished look without breaking the budget. Add the optional custom-cut Rear Seat Delete Kit and you've got a fully trimmed-out roll bar installation that performs as great as it looks. Our Camaro roll bar forms the perfect foundation for taking your safety up a huge notch. SAFETY IS OUR FIRST PRIORITY Safety is the main reason to install a roll bar in the first place. As racers ourselves, we sweat the details. That's why we use 1.75" x .095" Docol R8. Docol is 15% stronger than 4130 CrMo, and much less brittle. Docol R8 also dissipates impact energy more effectively. It's the same tubing used in full-competition road racing roll cages because, first and foremost, it's a roll bar not a trim piece. Our beefy main hoop straddles the rear seat cross member, a much stronger location than the rear footwell, eliminating the need for underbody backing plates. Taking a cue from NHRA cage design, the diagonal supports feature a concave design to allow full front-seat travel while distributing roll-over energy between the main hoop and kickers. The harness cross-bar is precisely located to put your shoulder straps at both the proper angle (0° to -20°) and distance to the driver. Finally our rear kickers bolt to a reinforced corner of the rear seat floor, again requiring no backing plates beneath the floor pan. A clear rear view is a safety concern. Our use of stronger materials and innovative design lets us keep your rear view unobstructed by additional bracing. This also helps weight down. Every detail of the CMS Gen 6 Camaro roll bar is engineered with safety as our primary goal. HAND CRAFTED IN AMERICA Okay, another reason people install a roll bar is that they look cool. We're car guys, we get that. Each roll bar is handcrafted right here in America by master fabricators for a perfect fit, beautifully 360o TIG welded for high strength, and fully powder-coated in our facility for a brilliant, durable finish. There's no extra charge for custom colors. CMS operates a complete powder-coating facility to offer you color-matched Camaro factory colors, giving your Camaro a personalized look that will last. None of your interior trim panels need to be eliminated or cut. Your rear seat back can be re-installed, or you can opt for our custom Shrader rear seat delete, the perfect place to put a track bag, helmet and HANS, driver cooling system, etc. (you can hide stuff under there, too). If you ever want to put your car back to stock, it will go back together as though the roll bar was never there. Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy), and all Grade 8 hardware needed is shipped with your CMS roll bar. Add Racing Harnesses and a Head-And-Neck Restraint and and you're ready to hit the track safe and secure. Click Here For Installation Instructions FEATURES: 1.75″ X .095" Docol R8 Advanced High-Strength Steel for superior safety Full 360o TIG welding for ultimate strength, integrity, and beauty Stronger one-piece main hoop/kicker design with detachable kicker feet for installation Only 51 lbs., yet incredibly strong Custom-made rear seat delete available Precision CNC-cut mounting plates Designed, built, and powder-coated in the USA CNC machined steel interlocking roll bar clamps ease installation Allows full seat travel with any seat Straightforward install and perfect fitment Comes with all necessary hardware   THIS PRODUCT IS INTENDED FOR OFF-ROAD USE ONLY

CMS Master "OFF" Decal Our CMS Master "OFF" Decal meets the standards of NASA, SCCA and IMSA for the "international marking of a spark in a blue triangle" to mark your vehicle's kill switch location. 3.375" by 2" wide Die-cut vinyl decal

CMS Performance Racing Gear Bag This high-quality gear bag is designed to carry everything you need for a weekend at the race track. Its large main compartment can be divided to keep your racing gear, helmet/HANS, etc. separate from your casual wear. It also features an expandable waterproof compartment to keep dirty or damp items separate. It features a durable heavy-duty nylon exterior with a padded interior held closed with heavy duty zippers for years of use. The CMS Performance Racing Gear Bag has three zippered compartments: a main compartment large enough for a fire suit, gloves, shoes, helmet, HANS, and other accessories; a front pocket to hold smaller gear and racing accessories; and a zippered "hamper" compartment to keep dirty or damp items separate. Includes three velcro dividers and a padded shoulder strap to make toting everything you need for a race weekend easy and convenient. DIMENSIONS: Main Compartment: 30" x 16" x 15" (76cm x 41cm x 38cm) Front Compartment: 21" x 11" x 2" (53cm x 28cm x 5cm)

CMS Fire Extinguisher Decal Our CMS Fire Extinguisher Decal meets the standards of NASA, SCCA and IMSA for marking your fire system actuator location. 3" diameter Die-cut vinyl decal

CMS Performance Bolt-In Roll Bar For Porsche 987 Cayman Fits 2006-2012 Porsche 987 Cayman (Base, S, GTS, R) HANDS DOWN THE BEST ROLL BAR FOR THE 987 The CMS Performance Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market for your Porsche 987 Cayman (base, S, GTS, or R). In designing our roll bar, safety and structural rigidity were our primary goals. That's why we use 1.75" x .095" premium Docol R8 Advanced High-Strength Steel tubing, vs. the weaker, more brittle 4130 tubing others use. ATTENTION TO DETAIL Our attention to detail puts your harness shoulder straps at the proper angle (0° to -20°) and distance relative to the driver, regardless of seat position. Our unique design provides an ideal mount for a Smarty Cam video camera. Our use of thicker state-of-the-art Docol tubing throughout allows us to keep the driver's rear view unobstructed by diagonal bracing, giving you unfettered access to the engine cover with the roll bar in place. (Our competitors make you remove part of your roll bar to get at your engine, risking damage to the bar and your interior!) The CMS roll bar's rear kickers bolt to the Cayman's rear shock towers, the safest, strongest mounting points. This allows the roll bar to contribute tremendous rigidity to your chassis and suspension. The main roll hoop is mounted to the frame structure across the rear bulkhead for lighter weight and superior strength. STRENGTH AND BEAUTY Each CMS roll bar is fully powder coated in your choice of colors custom-matched to Porsche's 987 color palette, or you can choose from over 6,000 custom colors -- no extra charge. Fully TIG welded by our master welders, using superior materials, and custom powder coated in-house by CMS Coatings. The design, strength, fit, and finish of the CMS roll bar all add up to this: you can spend more on a roll bar, but you only get the best from CMS. Click Here For Installation Instructions FEATURES:  1.75" X .095" Docol R8 Advanced High-Strength Steel for superior strength and safety Fully TIG welded for durability, strength, and beauty One-piece main hoop for incredible strength and safety. Full access to your engine without removal of any part of the roll bar Minimal cutting of trim required, for a factory-installed look CNC plasma-cut mounting plates Designed, built, and powder-coated by CMS in the USA CNC machined high-strength steel interlocking clamps to ease installation Allows full seat travel with any seat Straightforward installation and perfect fitment Detailed installation instructions and all necessary hardware included THIS PRODUCT IS INTENDED FOR OFF-ROAD USE ONLY

Shrader Performance Rear Seat Delete For Mustang Weighing about 30 pounds less than the factory rear seats, the Shrader RSD kit manufactured exclusively by Shrader Performance removes as much weight as possible while retaining a strong, solid support.  Tested on the GT350 and confirmed fitment. The back panel easily folds down for access to the trunk (a first in Mustang RSD designs) by popping out two plastic clips.  The fully-carpeted rigid molded plastic panels are strong enough for luggage, tires, race tools, and more.  With sound insulation padding built into each panel, no detail was spared.  Even the trunk area has a finished look! Detailed instructions are included, using factory bolt holes for mounting.  Black carpet only.  Does not fit convertibles. As seen in the 2016 SEMA show at the Ford Motor Company booth featured in the 2017 VMP Track Attack Mustang. FITS: All 2015+ Mustang Fastback (hardtop) including V6, GT, Ecoboost, GT350, GT500. Does not fit convertibles. INSTALLATION: Basic metric sockets, T40 and T50 Torx bits. Some cutting is involved if fitting around an existing bolt-in roll bar such as the CMS Performance Roll Bar. Click here for basic installation instructions.