Brand

Girodisc Replacement Rear Rotor Rings for Lotus Emira D2-388 Vehicle fitment • 2022+ Lotus Emira (rear axle) When the time comes to service your Lotus Emira’s rear brakes, the Girodisc D2-388 replacement rotor rings restore full performance without the cost of replacing the complete assembly. Designed to mount directly onto your existing A2-388 hats, these rings deliver the same high-carbon iron strength, curved-vane cooling, and track-ready performance as your original Girodisc setup. Durable, high-performance replacement rings Each ring is machined from Girodisc’s proprietary high-carbon iron alloy, engineered for thermal stability and durability under repeated heavy braking. The 48 curved internal vanes work like a centrifugal pump to draw air through the hub, keeping temperatures down during demanding street or track use. Because the hats are fully reusable, you only need to replace the rings — saving money while keeping your braking system race-ready. D2-388 Features • Direct replacement rings for Girodisc A2-388 rear rotor assemblies• 350 mm diameter × 32 mm thickness• Proprietary high-carbon iron metallurgy• 48 curved-vane internal cooling design• Designed and manufactured in-house in Bellingham, WA• Reuses your existing Girodisc aluminum hats and hardware• Recommended minimum thickness: 30 mm Note: These are rotor rings only. Hats and hardware are not included; designed for use with Girodisc A2-388 hats. Frequently Asked Questions Do these come with hats or hardware? No. The D2-388 kit includes rotor rings only. You’ll reuse your Girodisc A2-388 hats and hardware. How do I know when it’s time to replace the rings? Replace them when thickness reaches 30 mm or when cracks extend to the edge of the ring. Are these rings track-capable? Absolutely. They are built to handle repeated heat cycles while remaining compliant for street driving. Do I need special tools for installation? Standard shop tools are sufficient, but careful torqueing is required. Professional installation is recommended if you are not experienced with brake assembly.

Dull Finish Racers Tape 2in by 83ft (Gaffers Tape) The preferred choice of the pros. Dull Finish Gaffers tape is a vinyl-coated cloth, rather than a poly coated. Anybody who has ever used Gaffers tape, in place of duct tape, never looks back. This tape has a high quality adhesive that does not leave a sticky residue when removed. It comes in six brilliant colors and has many racing uses, including pit marking, emergency body and fender repair and waterproofing. The uses are endless. Available in eight colors; Black White Red Blue Electric Blue Yellow Neon Pink Neon Green    

Ferodo FCP0002 Brake Pads Fits the Following Vehicles (FMSI D031): Make Model Build (Year) Front Rear Alfa Romeo Berlina 1.75 2.0 68 - 77 X Alfa Romeo Giulia 1.3/1.6 66 - 76 X Audi 50 74 - 79 X Audi 60/75 66 - 72 X Audi 100 68 - 74 X X BMW 1600 Ti/1800 Ti/TiSA 63 - 71 X BMW M1 [non Procar] 78 - 82 X BMW M1 Procar 78 - 82 X Ferrari 308GT4/GTB/GTS 2 valve 73 - 85 X Ferrari Dino 246 GTB/GTS 68 - 75 X Hyundai i30 N TCR race car [Brembo caliper] 17 - X Lamborghini Countach 74 - 91 X Lancia Stratos 74 - 75 X Mercedes 190-300 (W108-W115) 59 - 71 X Mercedes 200-300 (W123) 76 - 85 X Mercedes 250-280 (W114) 71 - 76 X Mercedes 280-450 (W116) 72 - 80 X Opel Ascona A 70 - 75 X Opel Commodore B 72 - 77 X Opel GT 69 - 73 X Opel Kadett B 1.5/1.9/ Kadett C 67 - 79 X Porsche 356 1.6 C/SC 63 - 66 X Porsche 904 Carrera GTS + 904/6 63 - 65 X Porsche 911 2.0 -2.8 S-Calipers 64 - 73 X Porsche 911 2.0 M-Calipers 65 - 69 X Porsche 911 2.7 / 3.0 / 3.2 Carrera 72 - 89 X Porsche 911 S 72 - 83 X Porsche 912 65 - 70 X Porsche 914/4 70 - 72 X Porsche 914/6 70 - 72 X X Saab 99 67 - 74 X Talbot Simca 1000 Rallye II+III 72 - 81 X VW Golf 1.1/1.3/1.6 GTI 75 - 83 X Hyundai Veloster N TCR 18 - X   Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. The Ferodo DS3.12 is a top-tier endurance racing brake pad compound built for maximum fade resistance, high friction, and extremely consistent performance at elevated temperatures. If you need a Ferodo track brake pad for aggressive braking, long sessions, and serious motorsport use, DS3.12 is one of the strongest options in the lineup. The DS3.12 compound provides strong initial bite, a highly stable torque curve, and dependable braking performance in demanding track conditions. It is ideal for experienced drivers, endurance racing, and high-grip applications where repeatable stopping power matters most. Maximum fade resistance in the Ferodo range High friction and strong initial bite Very consistent braking response at track temperatures Excellent durability in endurance racing use Best for: advanced track-day drivers and racers who want a high-performance race brake pad with elite heat capacity and confidence-inspiring consistency. Note: DS3.12 is a full race compound and may produce increased dust, disc wear, and reduced cold performance compared with street-oriented pads. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency. This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel. Exceptional fade resistance for track use Long wear characteristics in endurance-style driving Progressive, controllable pedal feel Excellent choice for HPDE and racing applications Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use. Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners. Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP0002 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP0002 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0002 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Ferodo FCP0003 Brake Pads Fits the Following Vehicles (FMSI D30): Make Model Build (Year) Front Rear Alfa Romeo Giulia 1.3/1.6 66 - 76 X Alfa Romeo Sprint GT 1600 63 - 66 X BMW 3.0 CSL [E9] 71 - 75 X DKW F12 63 - 65 X Glas G/04 Type 63 - 69 X X Glas 2600 GT/3000 GT 65 - 69 X NSU Prinz 1000 TT/TTS 65 - 72 X Porsche 356 1.6 C/SC 63 - 66 X Porsche 904 Carrera GTS + 904/6 63 - 65 X Porsche 911 2.0 M-Calipers 65 - 69 X Porsche 912 65 - 70 X Porsche 914/4 70 - 72 X Saab 99 67 - 74 X Talbot Simca 1000 Rallye I 69 - 81 X Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. The Ferodo DS3.12 is a top-tier endurance racing brake pad compound built for maximum fade resistance, high friction, and extremely consistent performance at elevated temperatures. If you need a Ferodo track brake pad for aggressive braking, long sessions, and serious motorsport use, DS3.12 is one of the strongest options in the lineup. The DS3.12 compound provides strong initial bite, a highly stable torque curve, and dependable braking performance in demanding track conditions. It is ideal for experienced drivers, endurance racing, and high-grip applications where repeatable stopping power matters most. Maximum fade resistance in the Ferodo range High friction and strong initial bite Very consistent braking response at track temperatures Excellent durability in endurance racing use Best for: advanced track-day drivers and racers who want a high-performance race brake pad with elite heat capacity and confidence-inspiring consistency. Note: DS3.12 is a full race compound and may produce increased dust, disc wear, and reduced cold performance compared with street-oriented pads. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency. This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel. Exceptional fade resistance for track use Long wear characteristics in endurance-style driving Progressive, controllable pedal feel Excellent choice for HPDE and racing applications Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use. Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners. Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP0003 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP0003 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0003 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Ferodo  FCP0009 Brake Pads Fitment Guide for Ferodo FCP0009 Brake pad (FMSI D0004): Make Model Build (Year) Front Rear AC Cobra 7.0 64 - 66 X AC Cobra 428 7.0 67 - 74 X Aston Martin DB5 / DB6 / DBS 63 - 70 X Ferrari 206 67 - 68 X Jaguar E-Type 4.2/5.3 69 - 75 X Jensen FF/Interceptor/SP V8 66 - 76 X Volvo Amazone P121S 61 - 69 X Volvo P1800 61 - 69 X Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP0009 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo  FCP0009 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0009 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Ferodo FCP0011 Brake Pads Fitment Guide Ferodo FCP0011 Brake Pad Fitment (FMSI D045) Make Model Build (Year) Front Rear Porsche 908/01 68 - 71 X X Porsche 911 S 72 - 83 X Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency. This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel. Exceptional fade resistance for track use Long wear characteristics in endurance-style driving Progressive, controllable pedal feel Excellent choice for HPDE and racing applications Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use. Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners. Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP0011 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP0011  Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0011  Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Ferodo FCP0022 Brake Pads Ferodo FCP0022 Brake Pad Fitment Guide Make Model Engine Years Axle Fiat 850 0.8 1964–1972 Front Fiat 850 Special (GB) 0.8 1968–1972 Front Fiat 850 Spider 0.8 1965–1968 Front Fiat 850 Coupe (100_) Sport 0.9 1968–1972 Front Fiat 850 Spider Sport 0.9 1968–1972 Front Fiat 124 Sedan (124_) 1.2 1966–1975 Rear Fiat 124 Familiare (124_) 1.2 1967–1975 Rear Fiat 124 Sedan (124_) 1.4 1968–1972 Rear Fiat 124 Familiare (124_) 1.4 1967–1971 Rear Fiat 124 Sedan (124_) 1.5 1971–1975 Rear Fiat 124 Coupe Sport 1.4 1967–1972 Rear Fiat 124 Coupe Sport 1.6 1970–1975 Rear Fiat 124 Coupe Sport 1.8 1973–1976 Rear Fiat 124 Spider Sport 1.5 1966–1972 Rear Fiat 124 Spider Sport 1.6 1969–1974 Rear Fiat 124 Spider Sport 1.8 1972–1977 Rear Fiat 124 Spider Rally Abarth 1.8 1972–1975 Rear Fiat 125 Sedan (125_) 1.6 1967–1974 Rear Fiat X1/9 1.3 1973–1979 Rear Fiat X1/9 1.5 1978–1989 Rear Fiat 131 Racing 2.0 1978–1981 Rear Fiat 131 Super 2.0 1981–1984 Rear Fiat 131 Familiare / Panorama 2.0 1981–1984 Rear Fiat 132 1.6 1972–1982 Rear Fiat 132 1.7 1972–1977 Rear Fiat 132 2.0 1976–1981 Rear Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo FCP0022 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP0022 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0022 Operating Temperature Comparison Chart Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo FCP22 brake pads fit classic Fiat applications including Fiat 850, 124, 125, 131, 132, and X1/9 models. Compatible with Fiat 850 Coupe, Spider, and Special models, Fiat 124 Sedan, Coupe, Spider, Rally Abarth, and Familiare variants, Fiat 125 Sedan, Fiat 131 Racing and Super models, Fiat 132 sedans, and Fiat X1/9 sports cars produced from 1964 through 1989. Fiat 850 Brake Pads Fiat 124 Brake Pads Fiat 124 Spider Brake Pads Fiat 124 Coupe Brake Pads Fiat 124 Abarth Brake Pads Fiat 125 Brake Pads Fiat 131 Brake Pads Fiat 132 Brake Pads Fiat X1/9 Brake Pads Ferodo FCP22 Classic Fiat Brake Pads Vintage Fiat Brake Pads

Ferodo FCP0029 Brake Pads Ferodo FCP0029 Brake Pad Fitment Guide Make Model Engine Years Axle Fiat 850 0.8 1964–1972 Front Fiat 850 Special (GB) 0.8 1968–1972 Front Fiat 850 Spider 0.8 1965–1968 Front Fiat 850 Coupe Sport (100_) 0.9 1968–1972 Front Fiat 850 Spider Sport 0.9 1968–1972 Front Fiat 124 Sedan (124_) 1.2 1966–1975 Rear Fiat 124 Familiare (124_) 1.2 1967–1975 Rear Fiat 124 Sedan (124_) 1.4 1968–1972 Rear Fiat 124 Familiare (124_) 1.4 1967–1971 Rear Fiat 124 Sedan (124_) 1.5 1971–1975 Rear Fiat 124 Sedan (124_) 1.6 1973–1975 Rear Fiat 124 Coupe Sport 1.4 1967–1972 Rear Fiat 124 Coupe Sport 1.6 1970–1975 Rear Fiat 124 Coupe Sport 1.8 1973–1976 Rear Fiat 124 Spider Sport 1.5 1966–1972 Rear Fiat 124 Spider Sport 1.6 1969–1974 Rear Fiat 124 Spider Sport 1.8 1972–1977 Rear Fiat 124 Spider Rally Abarth 1.8 1972–1975 Rear Fiat 125 Sedan (125_) 1.6 1967–1974 Rear Fiat X1/9 (128_) 1.3 1973–1979 Rear Fiat X1/9 (128_) 1.5 1978–1989 Rear Fiat 131 Racing 2.0 1978–1981 Rear Fiat 131 Super 2.0 1981–1984 Rear Fiat 131 Familiare / Panorama 2.0 1981–1984 Rear Fiat 132 1.6 1972–1982 Rear Fiat 132 Special / GLS 1.7 1972–1977 Rear Fiat 132 2.0 1976–1981 Rear Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP0029 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP0029 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0029 Operating Temperature Comparison Chart Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo FCP22 brake pads fit a wide range of classic Fiat vehicles including Fiat 850, Fiat 124, Fiat 125, Fiat 131, Fiat 132, and Fiat X1/9 models. Applications include Fiat 850 Coupe, Spider, and Special models, Fiat 124 Sedan, Coupe, Spider, Familiare, and Rally Abarth variants, Fiat 125 Sedan, Fiat 131 Racing and Super models, Fiat 132 sedans, and Fiat X1/9 sports cars produced between 1964 and 1989. Compatible Vehicles  1964–1972 Fiat 850 1968–1972 Fiat 850 Special 1965–1968 Fiat 850 Spider 1968–1972 Fiat 850 Coupe Sport 1966–1975 Fiat 124 Sedan 1967–1975 Fiat 124 Familiare 1967–1976 Fiat 124 Coupe Sport 1966–1977 Fiat 124 Spider Sport 1972–1975 Fiat 124 Spider Rally Abarth 1967–1974 Fiat 125 Sedan 1973–1989 Fiat X1/9 1978–1984 Fiat 131 Racing / Super / Familiare 1972–1982 Fiat 132

Ferodo FCP0072 Brake Pads Ferodo FCP0072 Brake Pad Fitment Guide Make Model Engine Years Axle Fiat 850 0.8 1964–1972 Front Fiat 850 Special (GB) 0.8 1968–1972 Front Fiat 850 Spider 0.8 1965–1968 Front Fiat 850 Coupe Sport (100_) 0.9 1968–1972 Front Fiat 850 Spider Sport 0.9 1968–1972 Front Fiat 124 Sedan (124_) 1.2 1966–1975 Rear Fiat 124 Familiare (124_) 1.2 1967–1975 Rear Fiat 124 Sedan (124_) 1.4 1968–1972 Rear Fiat 124 Familiare (124_) 1.4 1967–1971 Rear Fiat 124 Sedan (124_) 1.5 1971–1975 Rear Fiat 124 Sedan (124_) 1.6 1973–1975 Rear Fiat 124 Coupe Sport 1.4 1967–1972 Rear Fiat 124 Coupe Sport 1.6 1970–1975 Rear Fiat 124 Coupe Sport 1.8 1973–1976 Rear Fiat 124 Spider Sport 1.5 1966–1972 Rear Fiat 124 Spider Sport 1.6 1969–1974 Rear Fiat 124 Spider Sport 1.8 1972–1977 Rear Fiat 124 Spider Rally Abarth 1.8 1972–1975 Rear Fiat 125 Sedan (125_) 1.6 1967–1974 Rear Fiat X1/9 (128_) 1.3 1973–1979 Rear Fiat X1/9 (128_) 1.5 1978–1989 Rear Fiat 131 Racing 2.0 1978–1981 Rear Fiat 131 Super 2.0 1981–1984 Rear Fiat 131 Familiare / Panorama 2.0 1981–1984 Rear Fiat 132 1.6 1972–1982 Rear Fiat 132 Special / GLS 1.7 1972–1977 Rear Fiat 132 2.0 1976–1981 Rear Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP0072  Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP0072  Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0072  Operating Temperature Comparison Chart Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.** Ferodo FCP22 brake pads fit classic Fiat 850, 124, 125, 131, 132, and X1/9 models. Applications include Fiat 850 Coupe, Spider, and Special variants, Fiat 124 Sedan, Coupe, Spider, Familiare, and Rally Abarth models, Fiat 125 Sedan, Fiat 131 Racing and Super models, Fiat 132 sedans, and Fiat X1/9 sports cars produced from 1964 through 1989. Compatible Vehicles 1964–1972 Fiat 850 1968–1972 Fiat 850 Special 1965–1968 Fiat 850 Spider 1968–1972 Fiat 850 Coupe Sport 1968–1972 Fiat 850 Spider Sport 1966–1975 Fiat 124 Sedan 1967–1975 Fiat 124 Familiare 1967–1976 Fiat 124 Coupe Sport 1966–1977 Fiat 124 Spider Sport 1972–1975 Fiat 124 Spider Rally Abarth 1967–1974 Fiat 125 Sedan 1973–1989 Fiat X1/9 1978–1984 Fiat 131 Racing / Super / Familiare 1972–1982 Fiat 132

Ferodo FCP0093 Brake Pads Ferodo FCP0093 Brake Pad Fitment Guide Vehicle Front Pad Shape Rear Pad Shape 1969–1975 Porsche 914 1.7 VW-Porsche 4 FCP2 FCP93 Make Model Engine Years Front Pad Shape Rear Pad Shape Alfa Romeo Giulietta 1.3 1977–1982 FCP2 FCP93 Alfa Romeo Giulietta 1.6 1977–1982 FCP2 FCP93 Alfa Romeo Giulietta 1.8 1977–1982 FCP2 FCP93 Alfa Romeo Giulietta 2.0 1977–1982 FCP2 FCP93 Alfa Romeo Alfetta 1.6 1972–1982 FCP2 FCP93 Alfa Romeo Alfetta 1.8 1972–1982 FCP2 FCP93 Alfa Romeo Alfetta 2.0 1972–1982 FCP2 FCP93 Alfa Romeo Spider 1.6 1979–1991 FCP2 FCP93 Alfa Romeo GTV 2.0 1976–1986 FCP2 FCP93 Alfa Romeo 75 1.6 1990–1992 FCP2 FCP93 Alfa Romeo 75 1.8 1990–1992 FCP2 FCP93 Alfa Romeo 75 2.0 1990–1992 FCP2 FCP93 Alfa Romeo 75 1.8 Turbo 1.8 Turbo 1990–1992 FCP448 FCP93 Alfa Romeo 75 2.0 Twin Spark 2.0 Twin Spark 1990–1992 FCP448 FCP93 Alfa Romeo 75 2.4 TD 2.4 TD 1990–1992 FCP448 FCP93 Alfa Romeo 75 2.5 V6 2.5 V6 1990–1992 FCP448 FCP93 Alfa Romeo 75 3.0 V6 3.0 V6 1990–1992 FCP448 FCP93 Alfa Romeo GTV 6 2.5 V6 1980–1987 FCP448 FCP93 Alfa Romeo Alfetta GTV6 2.5 V6 1980–1983 FCP116 FCP93 Alfa Romeo GTV 2.5 V6 1979–1987 FCP116 FCP93 Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP0093 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP0093 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0093 Operating Temperature Comparison Chart Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo brake pad applications for classic Alfa Romeo models include Giulietta, Alfetta, Spider, GTV, GTV6, and Alfa Romeo 75. Front pad shapes include FCP2, FCP116, and FCP448 depending on model and engine, while all listed applications use Ferodo FCP93 rear brake pads. Compatible vehicles range from 1972–1992 Alfa Romeo Giulietta, Alfetta, Spider, GTV, GTV6, and 75 models. Alfa Romeo Giulietta (1977–1982) Alfa Romeo Alfetta (1972–1982) Alfa Romeo Spider 1.6 (1979–1991) Alfa Romeo GTV 2.0 (1976–1986) Alfa Romeo GTV 2.5 V6 (1979–1987) Alfa Romeo GTV6 2.5 V6 (1980–1987) Alfa Romeo Alfetta GTV6 2.5 V6 (1980–1983) Alfa Romeo 75 (1990–1992) Porsche 914 Brake Pads Porsche 914 1.7 Brake Pads Porsche 914 Front Brake Pads Porsche 914 Rear Brake Pads Ferodo FCP2 Ferodo FCP93 Classic Porsche Brake Pads Air-Cooled Porsche Brake Pads

Ferodo FCP0096 Brake Pads Ferodo FCP0096 Brake Pad Fitment Guide Make Model Engine Years Front Pad Shape Lada Riva (All Models) All Engines 1972–1985 FCP96 Lada 1200 1.2 1972–1986 FCP96 Lada Nova 1.2 1970–1990 FCP96 Lada 1300 1.3 1974–1983 FCP96 Lada Nova 1.3 1975–1991 FCP96 Lada Toscana 1.3 1985+ FCP96 Lada 1500 1.5 1972–1985 FCP96 Lada Nova 1.5 1975–1991 FCP96 Lada Toscana 1.5 1983–1993 FCP96 Lada 1600 1.6 1975–1992 FCP96 Lada Nova 1.6 1975–1991 FCP96 Lada Nova 1.7 1994–1998 FCP96 Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP0096 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP0096 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0096 Operating Temperature Comparison Chart Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo FCP96 front brake pads fit a wide range of classic Lada vehicles including Riva, Nova, Toscana, 1200, 1300, 1500, and 1600 models. Compatible with 1.2L, 1.3L, 1.5L, 1.6L, and 1.7L engines produced between 1970 and 1998 depending on model. Compatible Vehicles 1972–1985 Lada Riva (All Models) 1972–1986 Lada 1200 1.2 1970–1990 Lada Nova 1.2 1974–1983 Lada 1300 1.3 1975–1991 Lada Nova 1.3 1985+ Lada Toscana 1.3 1972–1985 Lada 1500 1.5 1975–1991 Lada Nova 1.5 1983–1993 Lada Toscana 1.5 1975–1992 Lada 1600 1.6 1975–1991 Lada Nova 1.6 1994–1998 Lada Nova 1.7

Ferodo FCP0116 Brake Pads Fitment Guide for Ferodo FCP0116 Brake Pad (FMSI D109) Make Model Build (Year) Front Rear Lotus Esprit 75 - 86 X Opel Ascona B 75 - 78 X Opel Kadett C 1.9i/2.0i Rallye/GTE 73 - 79 X Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP0116 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP0116 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0116 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Ferodo FCP0167 Brake Pads Fitment Guide Ferodo FCP0167 Brake Pad (FMSI D330): Make Model Build (Year) Front Rear Ford Capri Mk1/Mk2/Mk3 72 - 87 X Ford Cortina Mk3/Mk4/Mk5 70 - 82 X Ford Escort Mk1/Mk2 2.0 RS 73 - 80 X Nissan 240Z 70 - 73 X Nissan 260Z 74 - 75 X Nissan 280Z 75 - 78 X Rover Healey 3000 64 - 67 X Sunbeam Alpine 64 - 67 X Sunbeam Tiger 64 - 67 X Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP0167 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP0167 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP0167 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**