Racing Optics
Racing Optics (X-Stack) - 2 mil Perimeter Seal Laminated Tearoffs XStack™ 10 (Clear)
$43.95
Racing Optics (X-Stack) - 2 mil Perimeter Seal Laminated Tearoffs XStack™ 10 (Clear)
The Perimeter Seal system is the latest technology from Racing Optics which allows for a tighter seal to visor, blocking out dirt, dust and water from behind the stack.
The XStack™ is a stack of 10 laminated Tearoffs that are 2 mil thick each.
The laminated technology creates a distortion-free optical lens.
Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear.
Fits: (Bell: BR8, Dominator.2, GTX.2, GP.2, GP.2 Youth, M.8, 287 Shield) / (Zamp: FS-2, Z-15 Shield, Z-20 Shield, Z-70, FS1.2 RZ) / (RJS) / (G-Force: Revo, Rift, Rookie)
Racing Optics
Racing Optics (X-Stack) - 2mm Laminated Tearoffs X-Stack
$39.95
Racing Optics (X-Stack) 2mm Laminated Tearoffs X-Stack™ 10 (Clear)
The XStack™ 10 is a stack of 10 laminated Tearoffs that are 2 mil thick each. The laminated technology creates a distortion-free optical lens. Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear.
RAO-10206C Fits:
Bell: Dominator.3, GTX.3, GP.3, GT.5 Touring, HP.3, HP5 Touring, B2 Apex, B2 Vision, SE03 Shield, SE05 Shield
ROP10203C Fits:
HJC H10 & AR10-III
Racing Optics
Racing Optics (X-Stack) - Bell 287 SRV, SRV-8 and Roux R-1 Helmets
$43.95
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmet Shields
Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287, SRV-8 and Roux R-1 helmets. Protect your Bell or Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches.
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Details
Qty in one stack: 10
Thickness: 2 mil
Stacks in one package: 3
Post centers: 12 1/8"
Shape: Banana
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Fitment Guide
Fits Bell:
Bell 287 SRV Shields
Bell GTX.2 Helmets
Bell GP.2 Helmets
Bell Star Infusion Helmets
Bell Dominator.2 Helmets
Bell M.8 Composite SA2015/SA2020
Bell M.8 Carbon SA2015/SA2020
Fits Roux:
R-1 Fiberglass
R-1 Composite
R-1 Gloss Carbon
R-1 Matte Carbon
Racing Optics is a laminated tear off solution for dirt and pavement forms of racing eliminating the need to apply individual tear offs. Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287 SRV and Roux R-1 shields. Protect your Bell and Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to Bell Helmets including the GTX.2, GP.2, Star Infusion, Dominator.2, and all Roux R-1 helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30)
Racing Optics
Racing Optics (X-Stack) -SE07
$34.95
Racing Optics (X-Stack) - Impact Helmet Shields
Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact helmets. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches.
Racing Optics is a laminated tear-off solution for dirt and pavement forms of racing eliminating the need to apply individual tear-offs. Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact shields. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear-offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to many Impact helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30)
Racing Optics (X-Stack) - Impact Helmets Details:
Qty in one stack: 10
Thickness: 2 mil
Stacks in one package: 3
Post centers: 12 1/8"
Shape: Banana
Racing Optics (X-Stack) - Impact Helmets Fitment Guide:
Bell RS7
Bell HP7
SKU: 10237C
Schuberth
Schuberth Helmet Bag
$92.00
Schuberth Helmet Bag
Carry your helmet safely and securely in this premium-quality Schuberth Helmet Bag. Designed to fit both a Frontal Head Restraint/HANS device and your favorite racing helmet, the Schuberth Helmet Bag is the perfect way to help protect your Schuberth SP1 or any helmet!
Schuberth
Schuberth SP1 Cheek Pads
$110.00
Schuberth SP1 Cheek Pads
Replacing your SCHUBERTH SP1 Cheek Pads is the perfect way to improve the fit of your helmet! The removable Cheek Pads come in a variety of thicknesses, which can dramatically change the way your helmet feels.
Schuberth
Schuberth SP1 Helmet Speaker Kits
from $185.00
Schuberth SP1 Helmet Speaker Kits
Integrated speaker kits from Schuberth elevate your communication experience to the next level by seamlessly incorporating high end audio components into your Schuberth SP1 helmet without compromising comfort or style. Schuberth helmet speaker kits feature speakers built directly into Schuberth Noise Reduction Earcups and a boom-style noise canceling microphone. Dual Electronic Kits also include an earbud connector for use alongside the earcup speakers.
If you purchase a Schuberth SP1 helmet with Speaker Kit, the electronics will be pre-installed, with earcup speakers replacing the standard Noise Reduction Earcups.
Available Schuberth SP1 Integrated Speaker Kits:
SH HK1111: Noise Reduction Earcups with speakers, flex-boom mic, and IMSA connection
SH HK1121: 3.5mm earbud jack, flex-boom mic, and IMSA connection
SH HK1151 DUAL KIT: Noise Reduction Earcups with speakers, integrated 1/8" (3.5mm) earbud jack, flex-boom mic, and IMSA connection
Schuberth
Schuberth SP1 Individual Top Vent Scoops
$30.00
Schuberth SP1 Individual Top Vent Scoops
Individual vent scoops direct cooler air into the Schuberth SP1 Carbon helmet's top vents. Can be purchased individually or in packs of three or six.
Schuberth
Schuberth SP1 Rear Spoiler
$65.00
Schuberth SP1 Rear Spoiler
The rear helmet spoiler is designed for drivers racing open cockpit vehicles. Attached using double sided adhesive tape, the rear spoiler increases stability by providing slight downforce.
Schuberth
Schuberth SP1 Top Air (Low Headroom)
$110.00
Schuberth SP1 Top Air
Add Top Air Ventilation to Your Schuberth SP1
Schuberth's flat, low-headroom top air attachment lets you connect your Schuberth SP1 helmet to your forced-air ventilation system. The Schuberth SP1 Top Air attaches to the top of the SP1 using high strength double-sided adhesive, and allows drivers to pump fresh air through the dedicated air channels within the helmet EPS.
Add cooling fresh air to your Schuberth SP1 Carbon helmet without compromising roof clearance. Choose from large- or small-inlet connector.
Schuberth
Schuberth SP1 Top Scoop
$50.00
Schuberth SP1 Top Vent Scoop
Clear top vent scoop directs cooler outside air into the Schuberth SP1 Carbon's top vents. Choose Standard or Flat style.
Schuberth
Schuberth SP1 Visor
from $119.00
Schuberth SP1 Visor
3MM THICK VISOR 3D INJECTED
Schuberth 3mm visor derived directly from their F1 expertise. Twelve different visor shades are available from transparent to dark with several mirrored and multi-layer coating options. All standard visors are compatible with the Pinlock 120 fog resistant lens, and clear tear-off buttons are installed. Each visor comes with a soft visor pouch to protect visors when not in use.
SCHUBERTH SP1 VISOR AVAILABLE COLORS:
Light Smoked Blue
Dark Smoked Blue
Light Smoked Red
Dark Smoked Red
Light Tint
Dark Tint
Light Mirrored Silver
Dark Mirrored Silver
Clear
Clear
Simpson
Shock Doctor Helmet Eject Device
from $60.00
Shock Doctor Eject Helmet Removal System
Helps reduce the risk of post-crash neck and spine injuries! The Shock Doctor Eject emergency helmet removal system consists of a small inflatable bag worn inside the helmet. In the event of an incident, safety workers or EMTs inflate the bag, which safely pulls your helmet off without placing any strain on the neck. The bag weighs about one ounce and will not affect the fit of your helmet. Required by AMA, IRL, and IMSA.
Simpson
Simpson Equipment Sterilizer and Dryer
$164.95
Simpson Equipment Sterilizer and Dryer
The Best Way to Keep Your Helmet Gloves and Shoes Fresh and Dry
Simpson’s newest antibacterial multi-equipment dryer circulates air in a temperature controlled environment to safely dry helmets, gloves, and footwear. It’s hard to put that wet smelly helmet back on your head. What’s happening to your expensive equipment? The truth is cheek pads and liners degrade over time from perspiration and bacteria. Keep your equipment in peak condition longer by stopping mold and mildew before it starts. You can focus on your driving or riding and quickly refresh between events.
Simpson Equipment Sterilizer and Dryer Features:
Disinfects & sanitizes
Anti-bacterial to eliminate odors and control bacteria growth
Temperature and timer settings
Simple design easily accommodates multiple styles and sizes of equipment1
Dual dryer ports
110 volt operation
A Note Regarding Ozone
Ozone is widely used for sterilization. The Simpson Equipment Sterilizer and Dryer generates ozone using the corona discharge method. It is a pale blue gas with a distinctively pungent smell, detectable by many people at concentrations as low as 0.01 ppm in air. Ozone is formed naturally from diatomic oxygen by electric discharge or exposure to ultraviolet radiation.
Ozone is a powerful oxidant and has many industrial and consumer applications related to oxidation. It's used to deodorize air, purify water, disinfect kitchen tools and treat industrial waste. This same oxidizing property, however, can cause ozone to damage mucous and respiratory tissues.
Therefore, for safety and comfort purposes, we recommend using the Simpson Equipment Sterilizer and Dryer only in a space with adequate ventilation. We also recommend staying away from it while it is disinfecting gear with ozone.
1 Helmet, gloves, and shoes pictured are not included. They are shown for illustrative purposes only.
SKU: 97200BK
Sparco
Sparco Dry-Tech Bag w- Dryer
$129.00
Sparco Dry-Tech Helmet Bag with Dryer
The Sparco Dry-Tech Helmet & HANS Bag w/ Dryer is designed to keep your helmet dry and protected. The Dry-Tech has unique built-in drying system with a 12V fan and ventilation holes. The 12V fan is powered by a USB cord, so any powered USB adapter up to 12V will work (phone and tablet chargers, etc).
The bag is constructed from 600D polyester with neoprene and synthetic leather inserts. The Dry-Tech can accommodate helmets with a HANS device still attached. For transport convenience, the Dry-Tech features two carrying handles and a shoulder strap.
Helmet and HANS device (shown) are not included.
SPARCO DRY TECH HELMET BAG WITH DRYER FEATURES
Built-in drying system (USB 12v power) with cover
Ventilation holes for passive drying/breathability
HANS device compatible
Zippered expansion for increased capacity
Two carry handles and shoulder strap
Sparco Dry-Tech Bag w- Dryer SKU: 016441NRSI
