Stilo S.r.l.
Stilo ST6 Tear Off Kits
from $34.95
Stilo ST6 Tear-Off Kits
Protect your Stilo ST6 helmet visor shield1 from rocks, dirt, and debris with these visor tear-offs. These Stilo tear-offs are perfect for road racing or dirt track use where your visor is exposed to the elements.
Choose from three different kits:
Package with 5 individual tear-offs (YA0931)
Three sets of 3 tear-offs stuck together, with perimeter seal (YA0930-CP)
Three sets of 10 tear-offs stuck together, with perimeter seal (YA0929-CP)
Now you can greatly extend the life of your Stilo ST6 shield by drastically reducing pitting and scratches.
Stilo ST6 Tear-Off Kit Details
Manufacturer: Stilo
Tint: Clear
Fits all Stilo ST6 helmet visors
1 Note: Stilo ST6 visor shield sold separately.
Racing Optics, Inc.
Racing Optics (X-Stack) - 2mm Laminated Tearoffs X-Stack for Stilo ST6
$39.95
Racing Optics (X-Stack) 2mm Laminated Tearoffs X-Stackâ„¢ 10 (Clear) for Stilo ST6
The XStackâ„¢ 10 is a stack of 10 laminated Tearoffs that are 2 mil thick each. The laminated technology creates a distortion-free optical lens. Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear.
10265C Fits: Stilo ST6
Schuberth GmbH
Schuberth Composite Side and Top Air
$275.00
Schuberth Composite Side and Top Air
The Schuberth Composite Side and Top Air is a clear forced-air helmet ventilation attachment designed to help route fresh air through the dedicated airflow channels inside the helmet EPS. Built for Schuberth SP1 and SF4 helmet applications, this accessory attaches across the top and side of the helmet with high-strength double-sided adhesive.
Side and top forced-air ventilation for Schuberth SP1 and SF4 helmets
This clear composite air inlet gives drivers an integrated forced-air connection for hot cockpit conditions, endurance racing, and demanding track sessions. The large screw-on aluminum nozzle uses a 1.25-inch connector, making it a strong choice for compatible helmet cooling hose systems.
Features
• Clear composite side and top air attachment
• Designed for Schuberth SP1 and SF4 helmet applications
• Helps pump fresh air through dedicated helmet EPS air channels
• Attaches with high-strength double-sided adhesive
• Fits both helmet shell sizes
• Small shell installation requires trimming the side piece at the orange sticker mark
• Large connector size: 1.25 inches
• Screw-on aluminum nozzle design
Installation Note
The clear composite Side and Top Air fits both helmet shell sizes. Before installing the composite version on a small shell, the side piece must be trimmed at the location indicated by the orange sticker.
Schuberth Composite Side and Top Air FAQs:
What does the Schuberth Composite Side and Top Air do? It connects a compatible forced-air system to the helmet and helps direct fresh airflow through the helmet’s dedicated EPS ventilation channels.
Which Schuberth helmets is this designed for? HMS lists this accessory for Schuberth SP1 and SF4 helmet applications.
What size is the connector? This version uses a large 1.25-inch connector with a screw-on aluminum nozzle.
Does it fit both helmet shell sizes? Yes. The clear composite Side and Top Air fits both shells, but small-shell installation requires trimming the side piece at the orange sticker mark before mounting.
How does it attach to the helmet? It installs on the top and side of the helmet using high-strength double-sided adhesive.
Complete your Schuberth helmet cooling setup with the Composite Side and Top Air for a clean, high-flow forced-air ventilation solution.
Arai Helmet Limited
Arai GPV-R Helmet Shields | Fits GPV-R & SKV-R
from $99.95
Arai GPV-R Replacement Shields for GPV-R and SKV-R Helmets
Refresh your visibility and customize your helmet with a genuine Arai GPV-R Helmet Shield. Designed for both Arai GPV-R auto racing helmets and Arai SKV-R karting helmets, these replacement shields provide the correct fit and operation for your Arai helmet.
Choose from a wide selection of standard, tinted, dual-pane, and mirrored shield options to match your driving conditions and preferred look.
Available Arai GPV-R Shield Colors and Options
Clear – Maximum light transmission for low-light, overcast, nighttime, and general racing conditions.
Semi-Tint – Reduces glare while allowing more light through than a dark tint.
Dark Tint – Designed for bright daytime conditions where reduced light and glare are preferred.
Dual-Pane Clear – Clear dual-pane configuration designed for improved performance in conditions where fogging may be a concern.
Dual-Pane Semi-Tint – Combines a tinted appearance with a dual-pane shield configuration.
Dual-Pane Dark Tint – Dark-tinted dual-pane option for bright conditions.
Mirror Medium Tint Gold – Medium-tint shield with a gold mirrored finish.
Mirror Medium Tint Silver – Medium-tint shield with a silver mirrored finish.
Mirror Medium Tint Blue – Medium-tint shield with a blue mirrored finish.
Mirror Medium Tint Green – Medium-tint shield with a green mirrored finish.
Mirror Medium Tint Red – Medium-tint shield with a red mirrored finish.
Arai GPV-R Helmet Shield Features
Fits Arai GPV-R auto racing helmets
Fits Arai SKV-R karting helmets
Multiple clear, tinted, dual-pane, and mirrored options available
Direct replacement for scratched, damaged, or worn shields
Excellent spare shield for race weekends and track days
Genuine Arai replacement component
Designed for proper fit and operation with compatible Arai helmets
Choose the Right Shield for Track Conditions
Different lighting conditions can dramatically affect visibility behind the wheel. A clear shield is an excellent choice for low-light conditions and night racing, while Semi-Tint and Dark Tint options can help reduce glare during daytime sessions.
For racers who want a more distinctive appearance, Arai's mirrored GPV-R shields are available in several finishes, including Gold, Silver, Blue, Green, and Red.
Keeping multiple shields in your gear bag allows you to change your setup as sunlight, weather, and track conditions change throughout the day.
Important Installation and Care Information
Do not remove the latch from the shield. The latch is part of the shield assembly and should remain installed for proper fit and operation.
Install the shield according to Arai instructions and verify that it opens, closes, and latches securely before using the helmet.
For mirrored shields, Arai recommends cleaning the shield only with warm water and a microfiber towel.
Frequently Asked Questions
What helmets do Arai GPV-R shields fit?Arai GPV-R shields fit both Arai GPV-R auto racing helmets and Arai SKV-R karting helmets.
What shield colors are available?Available options include Clear, Semi-Tint, Dark Tint, dual-pane versions, and mirrored finishes including Gold, Silver, Blue, Green, and Red.
Can I remove the latch from the shield?No. Do not remove the latch from the shield. It should remain installed for proper shield operation and fitment.
Which shield is best for night racing?Clear is generally the preferred choice when maximum light transmission is needed, including nighttime and low-light conditions.
Which shield is best for bright daytime conditions?Dark Tint and the medium-tint mirrored options are intended for brighter conditions where reducing incoming light and glare is desirable.
How should I clean a mirrored Arai GPV-R shield?Arai specifies cleaning mirrored GPV-R shields with warm water and a microfiber towel.
Should I carry more than one shield?Yes. Keeping multiple shield options in your race bag makes it easier to adapt to changing sunlight, weather, and track conditions.
Arai Helmet Limited
Arai GPV-R Cheek Pads
$116.95
Arai GPV-R Helmet Cheek Pads
Fine-Tune the Fit of Your Arai GPV-R
Your helmet can be the right size and still need a little fine-tuning. Arai GPV-R Cheek Pads let you customize the fit around your cheeks and jaw for a more secure, comfortable feel behind the wheel.
Whether you're replacing worn-out padding or dialing in the fit of a new GPV-R, multiple thickness options make it easy to add a little room—or snug things up for a more precise fit.
Choose Your Cheek Pad Thickness
Thinner cheek pads provide more room inside the helmet, while thicker cheek pads create a snugger fit. This allows you to adjust cheek pressure without changing the helmet's primary shell or crown fit.
12mm: Thinner option for significantly more cheek room
15mm: Thinner option for additional cheek room
20mm: Standard cheek pad thickness for size Large
25mm: Standard cheek pad thickness for sizes XS, Small, Medium, and XL
30mm: Thicker option for a snugger cheek fit
35mm: Extra-thick option for increased cheek support
40mm: Thickest option for the snuggest available cheek fit
Refresh an Older Helmet
Cheek pads naturally compress with use. If your GPV-R doesn't feel as secure as it once did, a fresh set of cheek pads can restore much of that snug, supportive feel without replacing the entire helmet.
Arai GPV-R Cheek Pad Details
Fits Arai GPV-R helmets
Sold as a replacement cheek pad set
Available in multiple thicknesses for personalized fit
Ideal for replacing worn or compressed cheek pads
Allows cheek and jaw fit to be adjusted independently of helmet size
Fit Tip: If your current cheek pads feel too tight, choose a thinner set. If the helmet feels loose around your cheeks or jaw, choose a thicker set.
Arai Helmet Limited
Arai GPV-R Interior Pad II
$127.95
Arai GPV-R Interior Pad II
Fine-Tune the Crown Fit of Your Arai GPV-R
A great helmet fit is about more than cheek pressure. The Arai GPV-R Interior Pad II allows you to fine-tune the fit around the crown and top of your head, helping you achieve a more secure, comfortable feel inside your GPV-R.
It's also an easy way to refresh a helmet whose interior has compressed with use. Swap in a fresh Interior Pad II to restore the supportive feel of your GPV-R without replacing the entire helmet.
Choose Your Interior Pad Thickness
Thicker interior pads create a snugger crown fit, while thinner pads provide additional room. Choose the thickness that best matches your helmet size and desired fit.
12mm: Optional thicker fit for XS and Small
10mm: Standard thickness for XS; optional thicker fit for Small
7mm: Standard thickness for Small; optional thinner fit for XS
Refresh the Fit of Your Helmet
Helmet padding naturally compresses over time. If your GPV-R has started to feel a little roomier around the crown, replacing the interior pad can restore a more secure, supportive fit and freshen up the inside of the helmet.
Arai GPV-R Interior Pad II Details
Fits Arai GPV-R helmets
Replacement crown interior pad
Available in 7mm, 10mm, and 12mm thicknesses
Allows crown fit to be fine-tuned without changing helmet size
Ideal for replacing worn or compressed interior padding
Fit Tip: If your GPV-R feels too tight around the crown, choose a thinner interior pad. If you need a snugger fit around the top of your head, choose a thicker pad.
Arai Helmet Limited
Arai GPV-R Interior Pad III
$127.95
Arai GPV-R Interior Pad III
Dial In the Crown Fit of Your Arai GPV-R
The Arai GPV-R Interior Pad III lets drivers fine-tune the crown fit of Medium and Large GPV-R helmets by changing the thickness of the interior padding. Whether you need a little more room or a more secure fit, swapping the interior pad is an easy way to personalize how your GPV-R feels.
It's also an excellent way to refresh an older helmet. Interior padding naturally compresses with use, and a fresh Interior Pad III can restore much of the snug, supportive feel your GPV-R had when it was new.
Choose Your Interior Pad Thickness
Thicker interior pads create a snugger crown fit, while thinner pads provide additional room. Interior Pad III is specifically designed for Medium and Large GPV-R helmets.
12mm: Optional thicker fit for Medium and Large
10mm: Standard thickness for Medium; optional thicker fit for Large
7mm: Standard thickness for Large; optional thinner fit for Medium
Refresh the Fit of Your Helmet
If your GPV-R has started to feel a little roomier around the crown, the helmet may not be the problem—the padding may simply have compressed over time. Replacing the interior pad can restore a more secure, supportive feel while freshening up the inside of your helmet.
Arai GPV-R Interior Pad III Details
Fits Arai GPV-R Medium and Large helmets
Replacement crown interior pad
Available in 7mm, 10mm, and 12mm thicknesses
Allows crown fit to be adjusted without changing helmet size
Ideal for replacing worn or compressed interior padding
Fit Tip: If your GPV-R feels too tight around the crown, choose a thinner interior pad. If you need a snugger fit around the top of your head, choose a thicker pad.
Important: Interior Pad III fits GPV-R helmets in sizes Medium and Large only. Other GPV-R helmet sizes use a different interior pad.
Arai Helmet Limited
Arai GPV-R Interior Pad IV
$127.95
Arai GPV-R Interior Pad IV
Dial In the Crown Fit of Your Arai GPV-R
The Arai GPV-R Interior Pad IV lets drivers fine-tune the crown fit of XL GPV-R helmets by changing the thickness of the interior padding. Whether you're replacing worn padding or looking for a slightly snugger fit, a fresh interior pad can make a noticeable difference in how your helmet feels.
Interior Pad IV is designed specifically for size XL Arai GPV-R helmets and is available in two thicknesses to help you achieve the right combination of comfort and security.
Choose Your Interior Pad Thickness
Thicker interior padding creates a snugger crown fit, while the standard pad maintains the original factory fit of your XL GPV-R.
10mm: Optional thicker pad for a snugger XL fit
7mm: Standard factory thickness for XL
Refresh the Fit of Your Helmet
Helmet padding naturally compresses with use. If your GPV-R has started to feel a little roomier around the crown, the shell may still fit perfectly—the interior padding may simply be showing its age. Replacing the interior pad can restore a more secure, supportive feel and freshen up the inside of your helmet.
Arai GPV-R Interior Pad IV Details
Fits Arai GPV-R size XL helmets
Replacement crown interior pad
Available in 7mm and 10mm thicknesses
7mm is the standard factory thickness for XL
10mm provides a snugger crown fit
Ideal for replacing worn or compressed interior padding
Fit Tip: If you're happy with the original fit of your XL GPV-R, choose the standard 7mm pad. If you'd like a little less room around the crown, the 10mm pad provides a snugger fit.
Important: Interior Pad IV fits Arai GPV-R helmets in size XL only. Other GPV-R helmet sizes use different interior pads.
Stilo S.r.l.
GPV-R / SKV-R TEAR-OFF Clear (6-pack)
$40.95
Arai GPV-R Clear Tear-Offs
Keep your vision clear on track with genuine Arai GPV-R Clear Tear-Offs. Designed specifically for compatible Arai auto racing helmet shields, these disposable clear tear-offs allow drivers to quickly remove dirt, rubber, oil, and other track debris from their field of vision without stopping to clean the shield.
This package includes six clear tear-offs and is compatible with both the Arai GPV-R and SKV-R helmets. Using genuine Arai replacement accessories helps ensure proper fit and performance with your Arai helmet and shield system.
Arai GPV-R Tear-Off Features
Genuine Arai replacement tear-offs
Clear construction for unobstructed visibility
Designed for quick removal during track use
Helps protect the helmet shield from dirt, rubber, oil, and debris
Fits Arai GPV-R helmets
Fits Arai SKV-R helmets
Includes six tear-offs per package
Arai Part Number: 01-1629
Compatible Arai Helmets
Arai GPV-R
Arai SKV-R
Arai specifically lists these tear-offs as fitting the GPV-R and SKV-R helmet models.
What's Included
6 Arai GPV-R clear tear-offs
Frequently Asked Questions
How many tear-offs are included?Each package includes six clear tear-offs.
Will these tear-offs fit the Arai GPV-R?Yes. These are designed to fit the Arai GPV-R helmet.
Will these fit the Arai SKV-R?Yes. Arai also lists these tear-offs as compatible with the SKV-R helmet.
What is the Arai part number?The Arai manufacturer part number is 01-1629.
Are these genuine Arai tear-offs?Yes. These are genuine Arai replacement accessories designed for compatible Arai racing helmets.
