OMP Race Gear

OMP KS-3 Kart Racing Gloves The OMP KS-3 Kart Racing Gloves are lightweight performance gloves designed for drivers who prioritize ventilation, direct steering feedback, and unrestricted hand movement. Their breathable AirFlow upper helps reduce heat buildup, while a low-profile silicone palm provides secure steering-wheel traction without adding unnecessary bulk. Pre-shaped fingers place the hand in a natural driving position, and externally stitched seams keep bulky thread away from sensitive areas inside the glove. Available in adult and junior sizing, the KS-3 offers a practical combination of comfort, grip, and recognizable OMP styling for kart racers at multiple experience levels. AirFlow Fabric for Hot Track Conditions The upper glove uses highly breathable, rice-grain-textured AirFlow fabric to promote ventilation around the hand. The open texture allows heat and moisture to escape more easily than a dense conventional fabric. This construction is especially beneficial during summer races, indoor karting sessions, endurance events, and repeated practice runs where heat buildup can affect concentration and comfort. Lightweight Silicone Steering-Wheel Grip A silicone grip treatment across the palm creates dependable traction against the kart steering wheel. The low-profile application helps keep the hands securely positioned during braking, cornering, and rapid steering corrections. Unlike a heavily padded palm, the lightweight grip surface preserves the detailed feedback needed to recognize changes in steering effort, front-tire grip, and chassis behavior. Pre-Shaped Ergonomic Fingers The KS-3 uses pre-shaped fingers that follow the position the hand naturally assumes while holding a kart steering wheel. This reduces the amount of effort required to close the hand and limits material bunching around the finger joints. A more natural resting position can help reduce fatigue through long heats and makes it easier to maintain consistent steering inputs throughout a race. External Seams and Finger Forchettes The finger seams are positioned externally to move stitching away from the inside of the glove. This creates a smoother interior and helps prevent rubbing or concentrated pressure against the fingers. Separate finger side panels, commonly known as forchettes, improve shaping and allow the glove to fit more naturally around each finger. Together, these features support sensitivity without sacrificing freedom of movement. Direct Steering Feel Without Heavy Padding The KS-3 is designed around light weight and steering sensitivity rather than substantial vibration-damping padding. Drivers receive a close connection to the wheel with minimal material between the hand and steering rim. This makes the glove well suited to racers who value precise feedback. Drivers who experience significant hand fatigue from steering vibration may prefer a thicker model with dedicated palm cushioning. Straight-Cut Elasticated Wrist A straight wrist opening gives the KS-3 a clean, streamlined fit. The integrated elastic band helps keep the glove securely positioned without requiring a bulky hook-and-loop adjustment strap. The flexible opening also allows quick entry and removal between sessions while maintaining a close fit once the glove is on. Adult and Junior Karting Sizes The KS-3 is available in adult and junior sizing, making it suitable for younger competitors as well as experienced racers. Drivers should select a size according to hand measurements rather than age alone, since finger length and palm width can vary significantly among junior racers. A correct fit should fill the fingertips and palm without limiting circulation, forcing the fingers to curl, or leaving loose material against the steering wheel. OMP KS-3 Kart Racing Glove Features Lightweight karting-glove construction Rice-grain-textured AirFlow upper improves ventilation Silicone palm grip enhances steering-wheel traction Low-profile palm preserves detailed steering feedback Pre-shaped fingers support a natural driving position External seams reduce internal pressure points Finger forchettes improve fit and flexibility Straight-cut wrist provides a streamlined opening Elastic wrist band offers secure retention Available in adult and junior sizing Designed for indoor and outdoor kart racing OMP KS-3 Kart Racing Glove Specifications Manufacturer: OMP Model: KS-3 Product Type: Kart Racing Gloves Upper Material: Rice-Grain-Textured AirFlow Fabric Palm: Lightweight Silicone Grip Finger Construction: Pre-Shaped Seams: External Finger Side Panels: Forchettes Wrist: Straight Cut with Elastic Band Size Options: Adult and Junior Intended Use: Kart Racing OMP KS-3 Available Colors Black – 071 Yellow and Black – 059 Orange and Black – 096 Red and Black – 060 Blue and Black – 146 White and Black – 129 Who Should Choose the OMP KS-3? The KS-3 is a strong choice for club racers, junior competitors, rental-kart drivers, and experienced racers who want a lightweight glove with minimal palm bulk. Its breathable upper makes it particularly attractive for hot-weather and indoor karting. It is also a practical step up from basic recreational gloves for drivers who want external-seam comfort and a dedicated silicone steering-wheel grip without moving into a heavily padded premium model. OMP KS-3 Kart Racing Gloves Size Chart Frequently Asked Questions Does the OMP KS-3 carry an FIA 8877-2022 homologation?An FIA 8877-2022 approval has not been confirmed for this listing. Drivers entering events with mandatory glove certification should inspect the label on the physical product and verify acceptance with the championship before ordering. Is the KS-3 fire resistant for automobile racing?No fire-resistant automobile-racing approval is stated. The KS-3 is designed as a karting glove and should not replace FIA- or SFI-approved Nomex gloves when flame-resistant equipment is required. What does the rice-grain texture do?The textured AirFlow fabric creates a lightweight, ventilated upper that promotes air movement and helps moisture escape during hot or physically demanding sessions. Is the KS-3 a padded glove?No. It prioritizes low weight and direct steering feel rather than thick palm cushioning. Racers wanting substantial vibration absorption should consider a glove with dedicated padding or a structured grip material. How does the KS-3 compare with the OMP KS-2R?The KS-3 is the lighter and simpler option, emphasizing airflow, silicone grip, and value. The KS-2R adds more technical articulation, including flexible bellows, mesh inserts, silicone finger protection, and a longer gauntlet-style construction. How does it compare with the OMP KS-X?The KS-X is positioned as a more premium competition glove with advanced ergonomic construction and current FIA 8877-2022 homologation. The KS-3 is better suited to drivers prioritizing simplicity, ventilation, and a lower price point. Are the external seams noticeable while driving?The seams sit along the outside edges of the fingers to remove stitching from the interior. When the glove fits correctly, they should improve comfort without interfering with normal steering-wheel use. What are finger forchettes?Forchettes are the narrow fabric panels between the fingers. They give each finger more defined shaping and help improve mobility, comfort, and fit. Are these suitable for a child beginning kart racing?Yes, provided the correct junior size is available and the glove satisfies the event’s equipment rules. Select a size from actual hand measurements rather than the driver’s age. What should I do if my child is between two sizes?Choose the size that permits full finger movement without large gaps at the fingertips. Avoid buying excessively large gloves for future growth because loose fabric can reduce grip and steering sensitivity. Are the KS-3 Gloves suitable for endurance karting?Their breathable construction and external seams can work well for long sessions. Drivers who experience vibration-related hand fatigue may prefer a glove with additional palm damping. Will the silicone grip work with suede and rubber steering wheels?The silicone treatment is designed to provide traction on common kart steering-wheel surfaces. The exact feel and level of tack can vary with the wheel material, moisture, wear, and cleanliness. Can the KS-3 be used for sim racing?Yes. Its light construction and silicone grip can work well for sim racing, although it is designed primarily for karting. How should the OMP KS-3 Gloves be washed?Hand wash them gently in cool water with mild soap. Avoid bleach, harsh chemicals, machine drying, and direct high heat that could damage the fabric, elasticity, or silicone grip. How can I make the silicone palm last longer?Use the gloves mainly for driving and avoid handling abrasive bodywork, tools, fasteners, or rough surfaces. Allow them to air dry completely before storing them.

OMP ONE Nomex Socks These socks make use of the same material of the One Underwear, coupled with advanced knitting techniques to provide differentiated pressure areas, with beneficial effect on blood circulation, reducing the feeling of fatigue on the legs whilst driving. Homologation: FIA 8856-2018

OMP FIRST BALACLAVA FIA 8856-2018 / SFI 3.3/5 You’re strapped into your cockpit, the engine roars like a wild beast, and the temperature inside feels like a sauna on wheels. Enter the FIRST Balaclava—your ultimate wingman for fiery track days and high-octane racing. Designed with FIA 8856-2018 and SFI 3.3/5 compliance, this entry-level fire-retardant balaclava keeps your face cool, comfortable, and—most importantly—protected when things heat up. OMP First Balaclava Features & Benefits Fire-Retardant Protection: Made for heroes who live life in the fast lane, this balaclava meets the highest safety standards, so you can focus on the finish line instead of the flames. Flat Seams: Say goodbye to itch and irritation. Flat seams ensure a snug fit without the scratchy distractions. It’s like a second skin—one that’s flame-resistant. Breathable Fabric: Designed to keep your head in the game (literally), the fabric wicks away sweat and lets you breathe easy, even when the heat is on. OMP First Balaclava Specifications Material: Advanced fire-retardant blend Certifications: FIA 8856-2018 and SFI 3.3/5 Fit: One size fits most with a snug, stretchable design Color: Classic white (because style counts, even under the helmet!) OMP First Balaclava FAQs Q: Is this balaclava required for racing events?A: Absolutely, if your racing series mandates FIA or SFI-rated gear. Even if it’s not required, it’s a smart move to stay safe. Q: Can I wash this balaclava?A: Yes! Hand wash with mild detergent and air dry to keep it in peak condition. Avoid bleach—it’s not a good look. Q: Does it fit under all helmets?A: Yes, it’s designed to fit snugly under standard racing helmets without adding bulk. Why Wait? Safety isn’t just an option—it’s a necessity. With the FIRST Balaclava, you’re not just meeting regulations; you’re elevating your game. Don’t let fire hazards or discomfort slow you down. Click Add to Cart now and get ready to own the track like a pro.  

OMP Sport Gloves FIA 8856-2018 The OMP Sport Gloves provide certified fire-resistant protection, dependable steering-wheel grip, and lightweight comfort at an accessible price. Homologated to the FIA 8856-2018 standard, these racing gloves are well suited for HPDE events, autocross, time trials, club racing, and other motorsport applications requiring approved driver equipment. Silicone printing across the palm creates a secure connection with the steering wheel, while the elasticated wrist makes the gloves easy to put on and helps keep them securely positioned throughout each session. Their straightforward construction gives drivers the protection and control they need without unnecessary bulk. Certified Protection at an Accessible Price The OMP Sport Gloves are designed for drivers who need current FIA-approved protection without moving into a premium racing-glove price category. They combine essential safety features with a comfortable construction that works well for both developing drivers and experienced club-level competitors. FIA 8856-2018 homologation makes them suitable for many competitive motorsport events requiring certified fire-resistant driver apparel. Drivers should always confirm the specific equipment requirements of their sanctioning organization or racing series. Silicone-Printed Palm Grip Silicone printing across the palm improves traction between the glove and steering wheel. The low-profile design helps provide a secure grip without adding a bulky reinforcement layer that could reduce steering feedback. The additional traction allows the driver to maintain control with a more relaxed grip, which can help reduce unnecessary hand and forearm fatigue during longer sessions. Lightweight Driving Comfort The lightweight construction allows natural hand movement and maintains sensitivity through the steering wheel. This makes the OMP Sport a practical option for track days, qualifying sessions, sprint races, and extended driving events. A close-fitting design minimizes excess material around the hand while allowing the driver to operate paddle shifters, switches, buttons, and other cockpit controls with confidence. Elasticated Wrist Entry An elasticated wrist opening allows quick entry and removal while helping keep the glove securely positioned during competition. The streamlined closure eliminates the need for a bulky adjustment strap and provides a clean overlap with compatible racing-suit sleeves. Versatile OMP Styling The OMP Sport Gloves are offered in multiple color combinations, allowing drivers to coordinate them with OMP racing suits, shoes, helmets, and other equipment. Their modern graphics provide a recognizable competition look while maintaining a practical, performance-focused design. OMP Sport Racing Glove Features Fire-resistant auto racing glove construction FIA 8856-2018 homologated Silicone-printed palm for secure steering-wheel grip Low-profile grip design preserves steering sensitivity Lightweight construction for extended driving comfort Elasticated wrist for easy entry and secure retention Close-fitting design supports dexterity and cockpit control Available in multiple OMP color combinations OMP Sport Glove Specifications Manufacturer: OMP Model: Sport Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-Printed Grip Wrist Closure: Elasticated Entry Homologation: FIA 8856-2018 Recommended Use: HPDE, Autocross, Time Trial, Club Racing, and Competitive Motorsport Why Choose the OMP Sport Gloves? The OMP Sport Gloves focus on the features drivers use every lap: certified fire protection, secure steering grip, comfortable hand movement, and a simple elasticated wrist. Their approachable price makes them a strong choice for new competitors purchasing their first FIA-approved gloves or experienced drivers looking for dependable track equipment. OMP Sport Glove Size Chart Frequently Asked Questions Are the OMP Sport Gloves FIA approved?Yes. The OMP Sport Gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver clothing. Can these gloves be used for wheel-to-wheel racing?Yes, provided FIA 8856-2018-approved gloves meet the requirements of the racing series, sanctioning organization, or event. Are the OMP Sport Gloves suitable for beginners?Yes. Their combination of certified protection, comfortable construction, dependable grip, and accessible pricing makes them a practical choice for developing drivers. Do the palms have silicone grip?Yes. Silicone printing across the palm improves traction and steering-wheel control without adding excessive bulk. How do the OMP Sport Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Most drivers begin with their usual OMP glove size. Do the gloves have an adjustable wrist strap?No. The elasticated wrist provides a secure fit without requiring a separate hook-and-loop adjustment strap. Are they comfortable for long track sessions?Yes. Their lightweight construction and streamlined fit are designed to support comfort and dexterity during extended driving sessions. How should the OMP Sport Gloves be cleaned?Gently hand wash them using mild soap and cool water, then allow them to air dry. Avoid bleach, harsh chemicals, machine drying, and direct high heat.

OMP Elbow Pad The OMP Elbow Pad is designed to provide targeted protection and comfort without restricting driver movement. Constructed with a lightweight Lycra outer layer and a pre-shaped foam insert, it conforms naturally to the arm while helping reduce discomfort caused by cockpit contact, chassis vibration, and extended driving sessions. Ideal for karting and motorsport applications where repetitive arm movement and steering input can create pressure points. Comfortable Protection for Demanding Driving Conditions Engineered to stay securely in place throughout a race, the OMP Elbow Pad features internal silicone anti-slip points that help prevent movement under racewear. Red bartack markers allow custom length adjustment for an individualized fit, while the ambidextrous design allows use on either arm. OMP Elbow Pad Features Lightweight Lycra outer construction for comfort and flexibility Pre-shaped foam insert provides targeted elbow protection Internal silicone anti-slip points help keep the pad securely positioned Red bartack marks allow custom length adjustment Ambidextrous design fits either left or right arm Designed to protect without restricting movement Available in multiple sizes for a secure fit Fitment & Sizing The OMP Elbow Pad is available in Black (071) and is sized according to biceps circumference: XS: 17–21 cm S: 22–26 cm M: 27–31 cm L: 32–38 cm XL: 39–44 cm OMP Elbow Pad FAQs What is the purpose of the OMP Elbow Pad? The elbow pad helps reduce discomfort and impact from cockpit contact, steering input, and repetitive arm movement during karting and motorsport activities. Can it be worn on either arm? Yes. The ambidextrous design allows the pad to be worn on either the left or right arm. Will the elbow pad move while driving? The internal silicone anti-slip points are designed to help keep the pad securely positioned during racing conditions. How do I choose the correct size? Select your size based on your biceps circumference. Refer to the sizing chart to ensure the best fit and protection. Can it be used for karting and auto racing? Yes. The OMP Elbow Pad is suitable for karting and various motorsport applications where additional elbow protection and comfort are desired. Does the elbow pad restrict arm movement? No. The lightweight Lycra construction and ergonomic design are intended to provide protection while maintaining freedom of movement. Reduce fatigue and improve comfort during long sessions with the OMP Elbow Pad, available now from Competition Motorsport. Contact our race gear specialists at 844-438-7244 for sizing assistance and product recommendations.

OMP Karting Underwear Shorts When the track heats up, stay cool and dry with the OMP Karting Underwear Shorts. Engineered for kart racers pushing limits, these performance shorts feature a lightweight, breathable construction with seamless 3D technology that manages sweat and movement in high-stress racing environments. Whether you're a junior karter or a seasoned vet, these shorts deliver comfort lap after lap. Lightweight Breathable Karting Shorts Made with Dryarn® Technology  OMP Karting Underwear Shorts Features Advanced moisture control: The 3D structure promotes rapid sweat expulsion, keeping you dry under pressure during long sessions. Dryarn® fabric: High-performance polypropylene fiber used across competitive sports for its thermal regulation and ultra-light weight. Seamless comfort: No chafing, no pinching—just smooth, anatomical fit that moves with you inside the seat or out on grid. Designed for karting and beyond: Ideal for karting, sim racing, or any high-intensity sport where heat and moisture control matter. Full range of sizes: From young drivers (8–10, 10–12 years) to adults (XSS through XXL), everyone gets a perfect fit for peak performance. OMP Karting Underwear Shorts FAQs Are these shorts fireproof? No. These karting underwear shorts are not fire-retardant and are not intended for auto racing. They're ideal for karting and non-FIA applications. Can I wear them with a standard kart suit? Yes, these are specifically designed to fit comfortably under karting suits without bulk or discomfort. What's the benefit of Dryarn® over cotton? Dryarn® is more breathable, faster drying, and better at thermal regulation than cotton, keeping you cooler and more focused. Do you offer youth sizing? Absolutely. These come in 8–10 and 10–12 year sizing for younger karting enthusiasts. If you're serious about karting comfort, the OMP Karting Underwear Shorts are the base layer upgrade your body will thank you for. Gear up and stay dry, no matter how intense the laps get.

OMP Nomex First Racing Socks FIA 8856-2018 Homologated OMP FIA 8856-2018 approved mid-length (mid-calf) First Nomex socks are thin and moisture wicking to retain great pedal feel while keeping your feet safe, dry and comfortable. Soft-knitted fire retardant fabric.

OMP KS-4 ART Kart Racing Gloves The OMP KS-4 ART Kart Racing Gloves combine lightweight steering feel, dependable silicone grip, and distinctive printed graphics in an accessible karting glove for youth and adult drivers. Designed for competitive and recreational karting, the KS-4 ART helps drivers maintain a secure connection with the steering wheel without the bulk of a heavily padded palm. Internal seams create a clean exterior profile, while the lightweight palm improves responsiveness across changing grip conditions. A straight-cut wrist with elastic retention keeps the glove securely positioned, making the KS-4 ART a practical choice for practice sessions, club competition, rental karting, and drivers purchasing their first dedicated pair of kart gloves. Lightweight Palm for Responsive Steering Feel The KS-4 ART uses a lightweight palm construction that minimizes unnecessary material between the driver and steering wheel. This helps preserve the feedback needed to recognize changes in steering load, front-tire grip, and chassis movement. The streamlined design is particularly well suited to racers who prefer direct steering sensitivity rather than thick cushioning or substantial vibration-damping material. Silicone-Rubber Ultragrip Palm A silicone-rubber ultragrip pattern increases traction against the steering wheel. The grippy surface helps keep the hands securely positioned during braking, cornering, and rapid changes of direction. Improved traction can also reduce the amount of gripping force needed to control the wheel, helping the driver maintain a more relaxed hand position during longer sessions. Internal Seam Construction The KS-4 ART uses internal seams to create a smooth, streamlined exterior. This construction keeps the outside edges of the fingers clean and reduces exposed stitching that could contact the steering wheel. Correct sizing is important with internally stitched gloves. The glove should fit closely without allowing the seams to press uncomfortably against the fingertips or sides of the fingers. Close, Flexible Karting Fit The glove is designed to follow the shape and movement of the hand while steering. A close fit helps prevent loose fabric from shifting independently of the fingers or bunching between the palm and wheel. The fingertips should be filled without painful pressure, and the driver should be able to open and close the hand freely before using the gloves on track. Straight Wrist with Elastic Closure A straight-cut wrist gives the KS-4 ART a clean, simple opening. Integrated elastic helps keep the glove securely positioned without requiring a bulky hook-and-loop strap. The flexible wrist also makes the gloves quick to put on and remove between sessions while maintaining dependable retention once they are in place. Three Printed Graphic Designs The KS-4 ART is offered in three printed graphic designs that give the glove a more distinctive appearance than a basic solid-color karting glove. The graphic treatment adds visual impact without relying on thick decorative overlays. Drivers can choose a design that coordinates with their karting suit, helmet, kart graphics, or team colors. Adult and Youth Karting Sizes The KS-4 ART is available in both adult and children’s sizes. Dedicated smaller sizes provide young drivers with a closer and more functional fit than attempting to use an oversized adult glove. Glove size should be selected from the driver’s actual hand measurement rather than age alone, since palm width and finger length can vary considerably among junior racers. OMP KS-4 ART Kart Racing Glove Features Lightweight karting-glove construction Responsive palm preserves steering-wheel feedback Silicone-rubber ultragrip palm improves control Internal seams create a clean exterior profile Close fit reduces loose material and bunching Straight-cut wrist provides a streamlined opening Elastic wrist closure keeps the glove securely positioned Available in three printed graphic designs Offered in adult and children’s sizes Designed for competitive and recreational karting OMP KS-4 ART Kart Racing Glove Specifications Manufacturer: OMP Model: KS-4 ART Product Type: Kart Racing Gloves Product Code: KB0-2757-A01 Palm: Lightweight Silicone-Rubber Ultragrip Palm Seam Construction: Internal Wrist: Straight Cut with Elastic Closure Graphics: Three Printed Designs Adult Sizes: XXS through XL Children’s Sizes: 4, 5, and 6 Intended Use: Kart Racing How the KS-4 ART Differs from the Standard KS-4 The KS-4 ART uses a silicone-rubber ultragrip palm and a selection of printed graphic designs. The standard KS-4 is listed with a suede-leather palm and a simpler silicone-printed design on the back of the glove. Drivers seeking a more modern appearance and a more responsive silicone grip surface may prefer the KS-4 ART. Those wanting a traditional suede palm may favor the standard KS-4. How the KS-4 ART Compares with the OMP KS-2 ART The KS-4 ART uses internal seams and is positioned as a simpler, value-focused karting glove. The KS-2 ART uses external seams and a lightweight stretch-polyester construction intended to provide a more performance-oriented fit. Drivers who are sensitive to stitching inside the fingers may prefer the externally stitched KS-2 ART. Racers prioritizing affordability, lightweight grip, and bold graphics may find the KS-4 ART better suited to their needs. Who Should Choose the OMP KS-4 ART? The KS-4 ART is a strong option for junior racers, rental-kart drivers, club competitors, and recreational karters ready to move beyond general-purpose gloves. Its lightweight palm and silicone grip also make it useful for practice sessions where direct steering feel is important. Drivers entering a championship with mandatory glove homologation should confirm the event rules before purchasing, since OMP does not list FIA 8877-2022 approval for this model. OMP KS-4 ART Kart Racing Gloves Size Chart Frequently Asked Questions Are the OMP KS-4 ART Gloves FIA 8877-2022 approved?OMP does not list FIA 8877-2022 homologation for the KS-4 ART. Drivers competing in events with mandatory certified gloves should confirm eligibility with their championship before ordering. Are these fire-resistant gloves for automobile racing?No fire-resistant automobile-racing approval is listed. The KS-4 ART is a karting glove and should not replace FIA- or SFI-approved Nomex gloves when flame-resistant equipment is required. Does the KS-4 ART have a suede palm?No. The official KS-4 ART specification identifies a silicone-rubber ultragrip palm. The standard OMP KS-4 is the related model listed with a suede-leather palm. Are the seams inside or outside the fingers?The KS-4 ART uses internal seams. Drivers who strongly prefer stitching outside the fingers should consider an externally stitched model such as the OMP KS-2 ART. Will the internal seams be uncomfortable?They should not cause discomfort when the glove is correctly sized. A glove that is too short or narrow may press the seams against the fingertips and finger sides. Is the KS-4 ART heavily padded?No. Its lightweight palm emphasizes steering response and sensitivity rather than substantial vibration damping. How does the ultragrip palm feel on a suede steering wheel?The silicone-rubber pattern creates a secure, tacky connection with common kart steering-wheel materials. The exact grip level will vary with wheel condition, cleanliness, and moisture. Will the grip make hand repositioning difficult?The palm is designed to resist slipping, so drivers may need to lift the hand slightly rather than drag it across the steering wheel during repositioning. Are dedicated children’s sizes available?Yes. OMP lists children’s sizes 4, 5, and 6 in addition to adult sizes XXS through XL. Should I buy a larger youth size so my child can grow into it?Oversized gloves can leave loose material at the fingertips and reduce steering control. Choose the size that fits correctly now rather than allowing substantial room for growth. How should the KS-4 ART fit?The glove should fit closely around the palm and fingers without restricting circulation or movement. There should be little empty space at the fingertips. Is the KS-4 ART suitable for indoor rental karting?Yes. Its lightweight construction, silicone grip, and elastic wrist make it a practical choice for indoor and outdoor recreational karting. Can the KS-4 ART be used for sim racing?Yes. The low-profile palm and silicone grip can provide good wheel control for sim racing, although the glove is designed primarily for karting. How should the gloves be cleaned?Hand wash them gently in cool water with mild soap, then allow them to air dry naturally. Avoid bleach, machine drying, radiators, and direct high heat. How can I prevent the silicone palm from wearing prematurely?Use the gloves mainly for driving and avoid handling rough bodywork, tools, chains, exposed fasteners, or abrasive surfaces while wearing them.

OMP RAIN-K Kart Racing Gloves The OMP RAIN-K Kart Racing Gloves are purpose-built for drivers who need reliable steering-wheel grip when rain creates slick and unpredictable track conditions. Their soft neoprene construction combines flexibility, comfort, and water resistance, helping kart racers maintain confident hand movement throughout wet sessions. A high-grip silicone rubber pattern across the palm improves traction against the steering wheel, reducing the effort required to maintain consistent steering inputs in the rain. Available in child and adult sizes, the RAIN-K is a valuable addition to any kart racer's wet-weather equipment. Designed Specifically for Wet-Weather Karting Standard karting gloves can lose traction when exposed to water. The OMP RAIN-K uses materials and grip technology selected specifically for damp and rainy racing conditions. The flexible neoprene upper is inspired by materials commonly used in aquatic sports equipment. It helps repel moisture while allowing the fingers and hand to move naturally. This construction provides a close, comfortable fit without the stiffness associated with heavier waterproof materials. High-Grip Silicone Rubber Palm The palm features a silicone rubber grip pattern engineered to increase traction between the glove and steering wheel. This added grip helps drivers maintain precise steering control when water makes the wheel surface slippery. Improved palm traction can also reduce the amount of hand pressure needed to hold the wheel securely, helping limit fatigue during long rain races, practice sessions, and qualifying runs. Comfortable Neoprene Construction Soft neoprene conforms naturally to the hand while providing the flexibility needed for quick steering corrections. The ergonomic design helps reduce pressure points and supports consistent feedback from the steering wheel. A straight-cut wrist makes the gloves easy to put on and remove while allowing unrestricted movement around the wrist. The streamlined cuff also fits comfortably beneath or over the sleeve of most karting suits and rain overalls. OMP RAIN-K Glove Features Purpose-built for rain and wet karting conditions Soft neoprene construction for flexibility and comfort Water-resistant materials help manage wet conditions High-grip silicone rubber palm pattern Improved steering-wheel traction in the rain Ergonomic shape helps reduce hand fatigue Straight-cut wrist for easy entry and natural movement Available in child and adult sizes Available Color Black (071) Available Sizes 004 Child 005 Child 006 Child XXS XS S M L XL Why Choose OMP RAIN-K Kart Racing Gloves? Wet-weather karting demands specialized equipment that helps the driver remain comfortable and in control. The OMP RAIN-K combines flexible neoprene with a silicone-grip palm to address the challenges caused by rain, standing water, and a slippery steering wheel. With sizing for both junior and adult competitors, the RAIN-K provides wet-weather performance for a wide range of kart racers without adding excessive bulk or restricting hand movement. OMP RAIN-K Karting Gloves Size Chart Frequently Asked Questions Are the OMP RAIN-K Gloves completely waterproof? No. The neoprene material provides useful water resistance and is designed to perform well in wet conditions, but the gloves should not be considered completely waterproof. How are the RAIN-K Gloves different from standard karting gloves? The RAIN-K uses flexible neoprene and a high-grip silicone rubber palm specifically selected for rain racing. Standard karting gloves are generally designed for dry conditions and may not provide the same level of traction when wet. Do the silicone palms improve grip on a wet steering wheel? Yes. The silicone rubber pattern increases traction between the palm and steering wheel, helping the driver maintain more consistent control in wet conditions. Are child sizes available? Yes. The OMP RAIN-K is available in child sizes 004, 005, and 006, along with adult sizes from XXS through XL. Will the neoprene construction restrict hand movement? No. Neoprene is soft and flexible, allowing the fingers and hand to move naturally while maintaining a close and comfortable fit. Can the OMP RAIN-K Gloves be used in dry weather? They can be worn in dry conditions, but their materials and palm design are specifically optimized for rain and wet-weather karting. Are these gloves suitable for automobile racing? The RAIN-K is designed primarily for karting and should not be substituted for certified flame-resistant auto racing gloves when FIA or SFI-approved equipment is required. How should the gloves be stored after a wet session? Allow the gloves to air-dry completely at room temperature before storing them. Avoid direct heat sources, which may damage the neoprene or silicone grip material.

OMP First-S Race Gloves The OMP First-S Race Gloves combine dependable fire-resistant protection, secure steering-wheel grip, and everyday comfort in an affordable competition glove. Updated to meet the FIA 8856-2018 homologation standard, the First-S is designed for drivers who want modern safety and straightforward performance without stepping into a premium price category. Silicone printing across the palms and fingers improves traction and control, while redesigned finger inserts provide a closer, more comfortable fit. A straight-cut cuff with an elasticated wrist allows quick entry and keeps the glove securely positioned throughout each session. Affordable FIA-Approved Performance The OMP First-S is built for drivers who need certified protection and reliable control at a practical price. Its lightweight construction focuses on the features that matter most behind the wheel: grip, comfort, flexibility, and current FIA approval. This makes the First-S a strong choice for drivers replacing older equipment or purchasing their first pair of FIA-homologated racing gloves. Silicone Palm and Finger Grip Silicone printing is applied across the palm and fingers to create a secure connection with the steering wheel. The low-profile grip pattern improves traction without adding the bulk of a separate reinforcement layer. Extending the silicone onto the fingers also improves control of paddle shifters, switches, buttons, and other cockpit controls. Improved Finger Inserts Redesigned finger inserts help the glove follow the natural shape of the hand more closely. The improved construction reduces excess material and supports better comfort around the fingers during repeated steering inputs. A more precise fit can also improve dexterity and reduce hand fatigue during longer sessions. Comfort for Extended Track Use The OMP First-S is designed to remain comfortable through repeated laps and long track days. Its lightweight materials allow natural hand movement while minimizing unnecessary pressure and bulk. The close-fitting construction helps the driver maintain a relaxed grip rather than squeezing the wheel excessively to stay in control. Straight-Cut Elasticated Wrist A straight-cut cuff gives the First-S a clean, traditional appearance and allows easy overlap with a compatible racing suit sleeve. The elasticated wrist keeps the glove securely positioned without requiring a bulky hook-and-loop strap. The flexible opening also makes the gloves quick and easy to put on or remove between sessions. Modern OMP Styling The OMP First-S features updated graphics and is available in multiple color options. Drivers can coordinate the gloves with OMP suits, shoes, helmets, and other racing equipment for a consistent competition look. FIA 8856-2018 Homologated Protection The OMP First-S Race Gloves are homologated to FIA 8856-2018, the current standard for fire-resistant driver clothing used in many forms of automobile competition. Drivers should always confirm the exact equipment requirements of their sanctioning organization before entering an event. OMP First-S Nomex Glove Features Lightweight fire-resistant racing glove construction Silicone printing across the palm and fingers Low-profile grip preserves steering sensitivity Improved finger inserts enhance fit and comfort Straight-cut cuff provides a clean, streamlined fit Elasticated wrist allows easy entry and secure retention Available in multiple modern colorways FIA 8856-2018 homologated OMP First-S Nomex Glove Specifications Manufacturer: OMP Model: First-S Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-printed grip Fingers: Silicone grip print with improved inserts Wrist: Elasticated closure Cuff: Straight cut Available Sizes: XS through XXL Homologation: FIA 8856-2018 Why Choose the OMP First-S? The First-S offers a practical balance of certified protection, secure grip, and comfort. Its silicone palm and finger print improve control, while the updated finger construction and elasticated wrist keep the fit simple and dependable. For drivers seeking a current FIA-approved glove with strong value and recognizable OMP styling, the First-S is an excellent competition-ready option. OMP First-S Nomex Glove Size Chart Frequently Asked Questions Are the OMP First-S Race Gloves FIA approved?Yes. The OMP First-S is homologated to the FIA 8856-2018 standard. Can the OMP First-S Gloves be used for competitive racing?Yes, when FIA 8856-2018-approved gloves meet the requirements of the racing organization or event. Do the gloves have silicone grip on the fingers?Yes. Silicone printing covers both the palm and fingers to improve steering-wheel and cockpit control. What is the benefit of the improved finger inserts?They provide a closer, more comfortable fit while reducing excess material and helping maintain dexterity. Do the OMP First-S Gloves have a wrist strap?No. An elasticated wrist keeps the gloves securely positioned without a separate adjustment strap. What sizes are available?The OMP First-S Race Gloves are available in sizes XS through XXL. Are these gloves suitable for long races or track sessions?Yes. Their lightweight construction and improved finger fit are designed to reduce fatigue during extended use. How should I clean the OMP First-S Gloves?Hand wash them gently with mild soap and cool water, then allow them to air dry. Avoid machine washing, bleach, strong chemicals, and high heat. How should the OMP First-S Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips.

OMP KS-4 Kart Racing Gloves The OMP KS-4 Kart Racing Gloves give new and recreational drivers a straightforward combination of steering feel, durable palm construction, and unmistakable OMP styling. Designed as an entry-level karting glove, the KS-4 delivers the essential features drivers need without the complexity or price of a premium competition model. A suede leather palm creates a durable contact surface against the steering wheel, while internal seams provide a traditional close-fitting feel. The elastic wrist stop helps keep the glove securely positioned, and the silicone-rubber graphics across the back add a bold modern appearance. A Practical First Karting Glove Drivers purchasing their first dedicated karting equipment need a glove that feels comfortable, stays securely in place, and provides better wheel contact than an ordinary work or athletic glove. The OMP KS-4 is built specifically for that role. Its uncomplicated construction makes it suitable for driver schools, rental-kart leagues, recreational track days, club practice, and racers assembling an affordable karting gear package. Traditional Suede Leather Palm The KS-4 uses a suede leather palm rather than a heavily padded or highly technical grip system. Suede provides a familiar steering-wheel feel while helping the glove withstand repeated contact during regular karting use. The relatively direct palm construction allows the driver to recognize changes in steering load and maintain consistent hand placement without excessive bulk between the hand and wheel. Internal Seams and Close Hand Fit Internal stitching gives the KS-4 a traditional karting-glove profile. Keeping the seams inside creates a clean exterior and allows the glove to maintain a straightforward, close-fitting shape. Drivers who prefer the familiar feel of conventionally stitched gloves may find this construction more natural than an externally stitched performance glove. Elastic Wrist Retention An elastic wrist stop helps secure the glove without requiring a separate hook-and-loop strap. The cuff stretches as the glove is pulled on and then fits closely around the wrist to limit unwanted movement while driving. This simple closure also keeps the wrist area streamlined where the glove meets the sleeve of a karting suit or jacket. Silicone-Rubber Back Graphics The prominent printed design across the back of the hand gives the KS-4 a more modern visual identity than a basic solid-color karting glove. Silicone-rubber graphics add dimensional detail while maintaining the glove’s lightweight, flexible character. Multiple color combinations allow racers to coordinate their gloves with a helmet, karting suit, team colors, or kart graphics. OMP KS-4 Kart Racing Glove Features Entry-level glove designed specifically for karting Suede leather palm for durability and steering-wheel feel Internal-seam construction Elastic wrist stop helps maintain a secure fit Silicone-rubber printed design across the back Available in adult and children’s sizes Multiple color combinations Suitable for recreational, rental, practice, and club karting Product Specifications Manufacturer: OMP Model: KS-4 Product Code: KB0-2750-A01 Product Type: Kart racing gloves Palm: Suede leather Seam Construction: Internal Wrist: Elastic wrist stop Exterior Design: Silicone-rubber printed graphics Sizing: Children’s and adult sizes Where the KS-4 Fits in the OMP Karting Glove Range The KS-4 is positioned as an accessible entry point into OMP karting gloves. Its traditional suede palm favors durability and familiar steering feel, while its internal seams and elastic wrist keep the construction simple. Drivers seeking more specialized silicone palm grip, external seams, or current competition homologation should compare the KS-4 with OMP’s higher-level karting glove models and confirm the requirements of their racing organization before purchasing. Who Should Choose the OMP KS-4? The KS-4 is a strong option for beginners, junior drivers, rental-kart racers, driving-school participants, and experienced drivers who want an affordable backup or practice glove. Its broad sizing range also makes it useful for families and teams that need the same basic glove design for both youth and adult drivers. OMP KS-4 Kart Racing Glove Size Chart Frequently Asked Questions Is the OMP KS-4 an entry-level karting glove? Yes. OMP positions the KS-4 as an entry-level model designed to provide the essential fit, palm durability, and wrist retention needed for karting. What material is used on the palm? The KS-4 uses a suede leather palm. This provides a traditional contact surface with useful durability and direct steering-wheel feel. Does the KS-4 use internal or external seams? The glove uses internal seams, giving it a conventional close-fitting karting-glove construction. How is the glove secured around the wrist? An elastic wrist stop helps hold the glove securely in place without using a separate adjustment strap. Does the back of the glove provide steering-wheel grip? No. The silicone-rubber printing on the back is primarily part of the glove’s design. Steering-wheel contact is provided by the suede leather palm. Is the current OMP KS-4 CIK-FIA Level 2 homologated? OMP’s current official KS-4 product listing does not state CIK-FIA Level 2 or FIA 8877-2022 homologation. Drivers competing under rules that mandate certified gloves should verify eligibility with their sanctioning organization before ordering. Can the KS-4 be used for automobile racing? No. The KS-4 is a karting glove and should not replace flame-resistant auto racing gloves when FIA or SFI certification is required. Are junior sizes available? Yes. Children’s sizes 004, 005, and 006 are offered in addition to the adult size range. Can these gloves be used for indoor rental karting? Yes. Their simple construction, suede palm, and elastic wrist make them well suited to indoor rental karting, leagues, practice sessions, and recreational driving. Are the KS-4 gloves suitable for outdoor kart tracks? Yes. They can be used for outdoor karting, provided they meet the equipment requirements established by the track, race organizer, or sanctioning body. How should the gloves fit? They should fit closely around the hand without limiting finger movement. Excess material in the palm can reduce steering feel, while an overly tight fit may cause discomfort. How does the standard KS-4 differ from the KS-4 ART? The standard KS-4 uses a suede leather palm and silicone-rubber graphics on the back. The KS-4 ART is a different model featuring a silicone-rubber ultragrip palm and updated printed designs.

OMP KS Karting Balaclava Kids Sizes Whether your young racer is clocking laps or gearing up for their first karting event, the OMP KS Karting Balaclava (Kids) is the base layer that keeps them comfortable and focused. Made with Dryarn®, this lightweight and breathable head sock helps regulate temperature and quickly wicks away sweat — even during high-intensity driving. Designed for a snug, seamless fit under any karting helmet. OMP Karting Balaclava (Kids) Features Seamless 3D construction: Eliminates hot spots and pressure points, offering maximum comfort under the helmet. Moisture-wicking performance: The innovative Dryarn® material rapidly expels sweat to keep the head dry and cool. Insulating and breathable: Perfect for long karting sessions, providing both thermal regulation and ventilation. Specifically sized for kids: This is not a one-size-fits-all adult product shrunk down — it's designed to fit smaller heads comfortably and securely. Two color options: Available in White (020) or Black (071) to match your young driver’s gear. OMP Karting Balaclava (Kids) FAQs Is this balaclava fireproof? No. This model is not fire-retardant and is not FIA- or SFI-approved. It’s designed specifically for karting and other low fire-risk environments. Can kids wear this in sanctioned karting races? Yes, this is a purpose-built karting balaclava, perfect for indoor and outdoor karting events where fireproof gear is not mandated. Will this fit under a child-size helmet? Yes. It’s designed for a snug, stretchable fit for youth sizes and works well under all major karting helmet brands. What’s the difference between the kids and adult versions? The adult model (KE0-3028-A01) is sized for full-grown drivers, while this version (KE0-3028-AK1) is cut specifically to fit children’s heads. If your young racer takes karting seriously, the OMP KS Karting Balaclava is a must-have layer for comfort, hygiene, and temperature regulation. Trusted by top karting teams and tailored for youth performance.

OMP Karting Socks When every tenth of a second counts, even your socks can give you an edge. The OMP Karting Socks are designed specifically for kart racers who need maximum comfort, support, and cooling — without the bulk. Featuring an elastic fabric and targeted compression zones, these short-length socks help reduce leg fatigue while offering a snug, race-ready fit that won’t bunch inside your driving shoes. Short-Length Karting Socks With Elastic Support Where It Counts OMP Karting Socks Features: Elastic construction: Flexible and form-fitting, the socks provide ideal support while adapting to the driver’s movements. Fatigue-reducing zones: Differentiated weave pattern is strategically placed to minimize muscle strain and promote circulation during long stints. Short length design: Perfect for karting shoes, the low-profile cut eliminates bunching and improves pedal feel. Technical fabric: Breathable and lightweight materials help regulate temperature and wick moisture away from your feet. Made for karting: These aren’t just sport socks—they’re purpose-built for the unique needs of kart drivers. OMP Karting Socks FAQs: Are these socks flame-resistant? No. These karting socks are not fireproof or FIA/SFI approved. They’re ideal for karting, sim racing, and other non-fire-risk driving environments. Do they fit inside racing boots comfortably? Yes. The short length and stretch material allow them to stay secure and comfortable inside low-profile karting shoes. Can these be used for other sports? Absolutely. While designed for karting, they also perform well in cycling, running, or any high-intensity sport requiring foot support and breathability. Are they unisex? Yes. OMP Karting Socks are designed to fit both men and women comfortably. If you're putting down serious laps and want every advantage possible, slip into a pair of OMP Karting Socks and feel the difference in comfort, support, and control from the first corner to the last.

OMP Karting Balaclava Lightweight, Breathable Head Protection for Serious Racers When the helmet goes on, your performance gear should work just as hard as you do. The OMP Karting Balaclava delivers lightweight, breathable head and neck protection specifically designed for the intense demands of kart racing. Whether you're battling for tenths in a championship sprint or logging laps at your local track, this karting balaclava keeps you cool, comfortable, and protected—all race long. Crafted from soft, moisture-wicking technical fabric, the OMP balaclava fits comfortably under any karting helmet without bunching or restricting movement. Its seamless construction reduces pressure points, while the breathable mesh zones increase airflow to help regulate temperature. Designed for both youth and adult drivers, the OMP Karting Balaclava is the perfect foundation for your kart racing gear—combining fit, function, and style in one professional-grade piece. OMP Karting Balaclava Highlights Lightweight, breathable OMP karting balaclava ideal for track sessions Moisture-wicking technical fabric keeps you cool and dry under pressure Seamless design fits smoothly under all modern karting helmets Breathable mesh zones improve airflow during long sessions Designed for youth and adult racers in all karting categories OMP Karting Balaclava FAQs Q: Is this balaclava FIA or CIK certified?A: The OMP Karting Balaclava is CIK-approved for karting use but is not FIA fireproof certified. For auto racing, consider OMP’s FIA 8856-2018 options. Q: What material is the OMP balaclava made of?A: It’s made from lightweight technical fabric designed to wick moisture and enhance breathability during high-intensity kart sessions. Q: Is it safe for youth drivers?A: Yes, the balaclava comes in sizes suitable for both junior and adult kart racers and provides a snug, race-ready fit. Q: Can I wear this with any karting helmet?A: Absolutely. The OMP balaclava is designed to fit under all modern karting helmets without discomfort or shifting. Q: Is this balaclava flame resistant?A: No, this model is not flame retardant. It’s intended specifically for kart racing, which doesn’t require FIA fire resistance. Q: Is it washable and reusable?A: Yes, the balaclava is fully washable and built to withstand repeated use without losing its shape or breathability. Q: Will it help prevent helmet irritation?A: Definitely. The seamless construction and soft fabric reduce friction, making it ideal for preventing chafing during long sessions.