all

Brembo 360x28 CCM-R Rear Rotors & Four-Piston GT-M Calipers BMW M3 Coupe (E92) 2007-2013 BMW M3 Convertible (E93) 2007-2013 BMW M3 Sedan (E90) 2008-2013 The Most Sophisticated High Performance Braking System Ever Manufactured for Your Car This is a lightweight carbon ceramic two-piece rotor and caliper system for racing, track days, and high-performance driving. Brembo's GT System performance combines superior wear (5x longer than iron), increased thermal capacity, and the extremely lightweight characteristics of CCM-R for an extremely versatile and durable system on or off the track. Brembo's GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everyday driving and demanding track-day sessions. Solutions and Technologies Born on the Race Track Braking systems consist of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminum monoblock calipers with opposed pistons, combined with cross-drilled Carbon Ceramic Matrix-Race (CCM-R) oversized discs. These premium discs feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Two-Piece CCM-R Rotors Reduce Weight and Dissipate Heat This GT CCM-R braking system's two-piece floating discs reduce unsprung weight and dissipate braking heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition. The discs are 360mm in diameter and 28mm thick. More Braking Torque and Thermal Capacity on the Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminum alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching Colors and Unique Brembo Design With a combination of painted calipers (available in red, black, yellow, or silver) flaunting the Brembo logo, and cross-drilled CCM-R discs, this Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. KIT DETAILS: Brembo GT CCM-R Systems Caliper Body: Monoblock Aluminum, Radial Mount Caliper Colors: Black, Red, Yellow, Silver Number of Pistons: 4 Disc Size and Construction: 360mm x 28mm CCM-R Disc Type: Drilled Disc Vane Design: Vented Straight Vane Disc Material: Carbon Ceramic Matrix-Race (CCM-R) / Pre-Bedded Disc to Hat Mounting: Floating H-Bobbin with Anti-Rattle Spring Front or Rear System: REAR Goodridge Stainless Steel Brake Lines Brembo High-Performance Brake Pads

Brembo 380x28 Rear Iron Rotors and Four-Piston Calipers For: BMW M3 Coupe (E92) 2007-2013 BMW M3 Convertible (E93) 2007-2013 BMW M3 Sedan (E90) 2008-2013 For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminum monoblock calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminum monobloc (one-piece) calipers with opposed pistons combined with cross-drilled or slotted two-piece floating oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminum calipers. These are monobloc parts machined from a single billet of cast aluminum, ensuring outstanding rigidity and minimized deformation. The discs supplied in the kit, which are floating two-piece design, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminum alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching Colors and Unique Looks With a combination of painted calipers (available in red, yellow, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. Brembo 380x28 Four Piston Brake Kit Details: Brembo GT-M Systems Caliper Body: Monoblock Radial Mount Caliper Colors: Black, Red, Silver, or Yellow Number of Pistons: 4 Disc Size and Construction: 380mm x 28mm Cast Iron Disc Type: Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: REAR Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads

Brembo 345x28 Two-Piece Rear Rotors and Four-Piston Calipers For: BMW M3 Coupe (E92) 2007-2013 BMW M3 Convertible (E93) 2007-2013 BMW M3 Sedan (E90) 2008-2013 For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminum monobloc calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminum monoblock (one-piece) calipers with opposed pistons combined with cross-drilled or slotted two-piece floating oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminum calipers. These are monobloc parts machined from a single billet of cast aluminum, ensuring outstanding rigidity and minimized deformation. The discs supplied in the kit, which are floating two-piece design, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit.  More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminum alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching Colors and Unique Brembo Design With a combination of painted calipers (available in red, yellow, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. Brembo BMW M3 345x28 Rotor and Caliper Kit Details: Brembo GT-M Systems Caliper Body: Monoblock Radial Mount Caliper Colors: Black, Red, Silver, or Yellow Number of Pistons: 4 Disc Size and Construction: 345mm x 28mm Cast Iron Disc Type: Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: REAR Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads

For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit.  More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching Colors and Unique Looks With a combination of painted calipers (available in red, yellow, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.

Antigravity OBD-II Memory Saver Cable Preserve Vehicle Settings While Changing the Battery The Antigravity OBD-II Memory Saver Cable is a simple, ultra-convenient tool that keeps your vehicle’s electronic settings intact while you change its main battery. By connecting this cable to your Micro-Start or Antigravity Portable Power Station, you can maintain vital data like seat positions, stereo presets, and ECU settings without risk of loss or reset. It’s a must-have accessory for professional and home mechanics alike. Unlike bulky cigarette-lighter-based memory savers, this clean and compact cable connects directly to your Micro-Start’s 12V DC port for a reliable and stable power feed. Whether you’re swapping batteries in a shop or doing maintenance in your garage, this cable saves time and prevents headaches from lost configurations. Key Features Preserve Critical Settings: Maintains ECU data, radio presets, seat positions, and more while replacing the main battery. Direct 12V Connection: Plugs straight into your Micro-Start or Power Station — no bulky cigarette adapter needed. Compact & Portable: Lightweight design fits easily in your tool kit or glovebox. Fast & Simple: Plug-and-play operation — connect, change battery, and go. Essential for Mechanics: Ideal for professional shops, mobile techs, and DIYers. How It Works Plug the OBD-II connector into your vehicle’s OBD port. Connect the other end to your Micro-Start or Portable Power Station 12V DC output port. Proceed to replace your vehicle’s main battery without losing any saved settings. Note: This cable will not work with Micro-Start models that only have USB ports (XP-3, SPORT, etc.). Compatible With XP-20-HD XP-20 XP-10-G2 (Gen 2) XP-10-HD XP-10 (Gen 1) XP-1 (Gen 1) PS-80 PS-45

Antigravity 16V Lithium Charger — 5A Fast, reliable 16-volt LiFePO4 charging with built-in protections and clear LED status. This solid, race-ready 5-amp 16-volt lithium charger is purpose-built for Antigravity 16V LiFePO4 (LFP) batteries including the VTX20 and the new H6-30-16 race car/truck battery. It also works with most other brands of 16-volt LiFePO4 motorsports batteries. Universal AC input (110–230V) means it’s track-bag friendly worldwide—just add a plug adapter outside the U.S. Correct chemistry, correct voltage: engineered specifically for 16V LiFePO4 batteries. Fast 5A charge rate: quick turnarounds between rounds or sessions. Multiple safety protections: short-circuit, over-voltage, reverse-polarity, over-temperature. Clear status at a glance: dual LEDs plus a screen showing charging voltage and current. Worldwide ready: 110/220V AC input (50–60 Hz) for shop or paddock power. Includes clamp leads: attached positive/negative clamps for easy hookup. Important: Use this charger only with 16-volt LiFePO4 (LFP) batteries. Never use a 16V charger on a 12V battery, and never use a 12V charger on a 16V battery. Features Advanced high-frequency switching mode power supply DC output isolated from AC input; charging parameters remain stable across input variations Fully automatic CC → CV charging profile tailored for LiFePO4 LED1 (Power) and LED2 (Charging/Charged) indicators On-unit screen shows live charging voltage and current Protections: short-circuit, over-voltage, over-temperature, reverse-polarity Efficiency > 85% with forced-air cooling 100% full-load burn-in tested Includes attached clamp leads for easy connection Specifications Antigravity 16V Lithium Charger 5A — Specs Model / SKU AG-BC-16V (16-Volt LiFePO4 Charger) Battery Compatibility 16V LiFePO4 (LFP) only — e.g., Antigravity VTX20, H6-30-16; also works with most other brands of 16V LiFePO4 motorsports batteries Charge Rate 5 A (Constant-Current / Constant-Voltage profile) Input Voltage 110–230 VAC, 50–60 Hz (worldwide use with plug adapter as needed) Indicators LED1 (Power), LED2 (Charging/Charged), on-unit screen shows V/A Safety Protections Short-circuit, over-voltage, over-temperature, reverse-polarity Efficiency / Cooling > 85% efficiency; fan-forced ventilation Included Leads Attached clamp leads (Red = +, Black = –) Operation Plug the charger into a wall outlet or power source (LED1 turns red to confirm AC power). Connect clamps to the battery with correct polarity:Red clamp to Positive (+), Black clamp to Negative (–). LED2 indicates charging status: Green confirms connection; flashing Red/Green during charging; solid Green when fully charged. Monitor voltage/current on the screen as needed. Disconnect when finished. Compatibility Antigravity: VTX20 (16V), H6-30-16 (16V) — and other Antigravity 16V LiFePO4 models Other Brands: most 16V LiFePO4 vehicle/motorsports batteries (check manufacturer specs) What’s in the Box Antigravity 16V Lithium Charger — 5A Attached positive/negative clamp leads Quick-start instructions FAQs Can I use this on a 12V battery?No. This charger is for 16-volt LiFePO4 batteries only. Do not mix voltages. Will it work outside the U.S.?Yes. It accepts 110–230V AC (50–60 Hz). Use a simple plug adapter where required. Does it maintain batteries between events?Yes. The CC/CV profile and clear status indicators make it suitable for charging and periodic top-offs on 16V LiFePO4 chemistry. Need fitment or setup help? Our motorsports team can advise on the right charging regimen for your build.Competition Motorsport | sales@competitionmotorsport.com | (844) 438-7244

Sabelt Sewn-In Arm Restraints Option for Sabelt driving suits. Not for individual sale.

Forgeline AL307 The amazing AL307 represents an exciting revolution in Forgeline wheel design and is engineered specifically for the high-performance modern supercar. The AL307 delivers cutting-edge styling with five split-V spokes that span integrated lug holes with intricate multi-dimensional edges. Each spoke features a distinctive cutout along the spoke’s inner edge. These concave spokes are tapered and extend beyond the rim register to reach out over the step of the AL307’s modular aluminum outer rim shell. The Forgeline AL Series AL307 is a custom made-to-order three piece modular wheel comprised of a precision-machined forged 6061-T6 aluminum center, 6061-T6 aluminum rim shells, and a 1.5-3.0 inch wide stepped-lip outer. It is available in 18, 19, 20, and 21-inch diameters and is uniquely engineered for modern exotic sport and luxury vehicle applications. And like any Forgeline wheel, the AL307 is fully customizable in fitment and finish. Custom Made-to-Order for Each Customer and Each Unique Vehicle Application Unique Center Design is Precision-Machined from Forged 6061-T6 Aluminum Five Multi-Dimensional V-Spokes Span Integrated Lug Holes Complex Machining Details Distinctive Cutouts Along the Inner Edge of Each Spoke Unique Full-Length Spokes Extend Beyond the Rim Register and Reach Over the Step of the Outer Rim Shell Available in 18, 19, 20 and 21-inch Fitments Customizable Finish Options Legendary Forgeline Quality and Customer Service

Forgeline AL306 Based upon Forgeline's original five-lug AL301, the 6-lug AL306 continues the exciting evolution in Forgeline wheel design and is engineered specifically for the high-performance 6-lug supercar. The AL306 offers cutting-edge styling with a unique precision-machined forged 6061-T6 aluminum center featuring a lightweight racing-inspired six Y-spoke forged aluminum center design with aggressive I-beam machining details. These concave spokes are tapered and extend beyond the rim register to reach out over the step of the AL306’s modular aluminum outer rim shell. And it’s 6-lug hub center makes the AL306 perfect for the Dodge Viper or other 6-lug sport & luxury applications! The Forgeline AL Series AL306 is a custom made-to-order three piece modular wheel comprised of a precision-machined forged 6061-T6 aluminum center, 6061-T6 aluminum rim shells, and a 1.5-3.0 inch wide stepped-lip outer. It is available in 18, 19, 20, and 21-inch diameters and is uniquely engineered for modern exotic 6-lug sport and luxury vehicle applications. And like any Forgeline wheel, the AL306 is fully customizable in fitment and finish. Custom Made-to-Order for Each Customer and Each Unique Vehicle Application Unique Center Design is Precision-Machined from Forged 6061-T6 Aluminum Lightweight Racing-Inspired Six Y-Spoke Center Design Six-Lug Hub Center Aggressive I-Beam Machining Details Unique Full-Length Spokes Extend Beyond the Rim Register and Reach Over the Step of the Outer Rim Shell Available in 18, 19, 20 and 21-inch Fitments Customizable Finish Options Legendary Forgeline Quality and Customer Service

Forgeline AL305 The AL305 represents an exciting evolution in Forgeline wheel design and is engineered specifically for the high-performance modern supercar. The AL305 delivers cutting-edge styling with a high-tech precision-machined forged 6061-T6 aluminum center featuring lightweight racing-inspired ten spoke design, open-lug hub center, and aggressive I-beam machining. The Forgeline AL Series AL305 is a custom made-to-order three piece modular wheel comprised of a precision-machined forged 6061-T6 aluminum center, 6061-T6 aluminum rim shells, and a 1.5-3.0 inch wide stepped-lip outer. It is available in 18, 19, 20, and 21-inch diameters and is uniquely engineered for modern exotic sport and luxury vehicle applications. And like any Forgeline wheel, the AL305 is fully customizable in fitment and finish. Custom Made-to-Order for Each Customer and Each Unique Vehicle Application Unique Center Design is Precision-Machined from Forged 6061-T6 Aluminum Lightweight Racing-Inspired Ten Spoke Center Design Open-Lug Hub Center Aggressive I-Beam Machining Unique Full-Length Spokes Extend Beyond the Rim Register and Reach Over the Step of the Outer Rim Shell Available in 18, 19, 20 and 21-inch Fitments Customizable Finish Options Legendary Forgeline Quality and Customer Service

Forgeline AL304 The uniquely-styled AL304 represents an exciting evolution in Forgeline wheel design and is engineered specifically for the high-performance modern supercar. The AL304 delivers cutting-edge styling with a high-tech precision-machined forged 6061-T6 aluminum center featuring five “Tuning Fork” split spokes that span “hidden” lug holes. The AL304’s relatively open spoke pattern works well to exhibit giant supercar brakes. The Forgeline AL Series AL304 is a custom made-to-order three piece modular wheel comprised of a precision-machined forged 6061-T6 aluminum center, 6061-T6 aluminum rim shells, and a 1.5-3.0 inch wide stepped-lip outer. It is available in 18, 19, 20, and 21-inch diameters and is uniquely engineered for modern exotic sport and luxury vehicle applications. And like any Forgeline wheel, the AL304 is fully customizable in fitment and finish. Custom Made-to-Order for Each Customer and Each Unique Vehicle Application Unique Center Design is Precision-Machined from Forged 6061-T6 Aluminum Five “Tuning Fork” Split Spokes Span “Hidden” Lug Holes Open Spoke Pattern Exhibits Giant Supercar Brakes Unique Full-Length Spokes Extend Beyond the Rim Register and Reach Over the Step of the Outer Rim Shell Available in 18, 19, 20 and 21-inch Fitments Customizable Finish Options Legendary Forgeline Quality and Customer Service

Forgeline AL303 The intricately-sculpted AL303 represents an exciting evolution in Forgeline wheel design and is engineered specifically for the high-performance modern supercar. The AL303 offers cutting-edge styling with a unique precision-machined forged 6061-T6 aluminum center featuring ten asymmetric Y-spokes grouped together in opposing pairs. These concave spokes connect far into the center, thanks to special engineering and machining deep into the edge of the mounting pad, and extend beyond the rim register to reach out over the step of the AL303’s modular aluminum outer rim shell. The Forgeline AL Series AL303 is a custom made-to-order three piece modular wheel comprised of a precision-machined forged 6061-T6 aluminum center, 6061-T6 aluminum rim shells, and a 1.5-3.0 inch wide stepped-lip outer. It is available in 18, 19, 20, and 21-inch diameters and is uniquely engineered for modern exotic sport and luxury vehicle applications. And like any Forgeline wheel, the AL303 is fully customizable in fitment and finish. Custom Made-to-Order for Each Customer and Each Unique Vehicle Application Intricate Center Design is Precision-Machined from Forged 6061-T6 Aluminum Ten Asymmetric Y-Spokes are Grouped Together in Opposing Pairs Special Engineering & Machining Deep Into the Mounting Pad Creates Additional Spoke Length Unique Full-Length Spokes Extend Beyond the Rim Register and Reach Over the Step of the Outer Rim Shell Available in 18, 19, 20 and 21-inch Fitments Customizable Finish Options Legendary Forgeline Quality and Customer Service

Forgeline AL301 The muscular AL301 represents an exciting evolution in Forgeline wheel design and is engineered specifically for the high-performance modern supercar. The AL301 offers cutting-edge styling with a unique precision-machined forged 6061-T6 aluminum center featuring a lightweight racing-inspired five Y-spoke forged aluminum center design with aggressive I-beam machining details. These concave spokes are tapered and extend beyond the rim register to reach out over the step of the AL301’s modular aluminum outer rim shell. The Forgeline AL Series AL301 is a custom made-to-order three piece modular wheel comprised of a precision-machined forged 6061-T6 aluminum center, 6061-T6 aluminum rim shells, and a 1.5-3.0 inch wide stepped-lip outer. It is available in 18, 19, 20, and 21-inch diameters and is uniquely engineered for modern exotic sport and luxury vehicle applications. And like any Forgeline wheel, the AL301 is fully customizable in fitment and finish. Custom Made-to-Order for Each Customer and Each Unique Vehicle Application Unique Center Design is Precision-Machined from Forged 6061-T6 Aluminum Lightweight Racing-Inspired Five Y-Spoke Center Design with Aggressive I-Beam Machining Details Unique Full-Length Spokes Extend Beyond the Rim Register and Reach Over the Step of the Outer Rim Shell Available in 18, 19, 20 and 21-inch Fitments Customizable Finish Options Legendary Forgeline Quality and Customer Service

​The most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.    Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing.         Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick.     Pads provide optimum performance in various driving conditions   The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

The most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.    Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing.         Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick.     Pads provide optimum performance in various driving conditions   The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

​The most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.    Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing.         Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick.     Pads provide optimum performance in various driving conditions   The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.