Racing Brake Fluid

CMS Performance RF1 DOT4 Racing Brake Fluid Real-Life High Boiling Point Without The Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 328º C (622º F), RF1 exceeds all DOT3 & DOT4 requirements and is compatible with all DOT 3, 4, and 5.1 fluids. (Not compatible with DOT5 or mineral-based brake fluids.) On the race track, brake systems operate at very high sustained temperatures, and there is perhaps no single safety system more important in racing than your brakes. No single part of that system is more critical than brake fluid. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. So we did something about it. Manufactured in partnership with Orthene, the brake fluid supplier to many teams in Formula 1, WEC, and other professional series, RF1 Racing Brake Fluid was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend more on brake fluid, but you can't buy higher-performance than RF1 Racing Brake Fluid. RF1 Racing Brake Fluid Details: Typical dry boiling point: 328º C (622º F) Typical wet boiling point: 204º C (399º F) Exceeds DOT3 & DOT4 standards Bottle size: 500 ml (16.9 fl oz) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!

Castrol React SRF Racing Brake Fluid Castrol React SRF Racing Brake Fluid is an ultra-high performance brake fluid popular with many of the highest performing auto racing teams around the world.  The key to Castrol SRF brake fluid's superior performance is its silicon-ester technology.  Not only is it less hygroscopic (i.e., it absorbs less water) than typical glycol-based brake fluids, Castrol SRF also reacts chemically with any absorbed water to further reduce its adverse effects on high-temperature braking performance. The result is an almost unheard of 518° F (270° C) wet boiling point -- more than 100° F higher than most other racing brake fluids! Exceeds SAE 1703, ISO 4925, JIS K2233, FMVSS No. 116 DOT3 and DOT 4 specifications. Note: Castrol SRF is not a silicone-based brake fluid (e.g., DOT 5) and is compatible with most factory brake systems and fluids.  Always follow vehicle manufacturer's recommendations when adding brake fluid. TYPICAL PROPERTIES: Dry Boiling Point: 590°F (310°C) Wet Boiling Point: 518°F (270°C) Superior anti-vapor lock properties One-liter (1000ml) bottle

Motul RBF 600 Racing Brake Fluid Motul RBF 600 is a 100% synthetic fluid for hydraulic-actuated brake and clutch systems. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems.Motul RBF 600 far exceeds the standards of DOT 3 and DOT 4.The RBF 600 container is filled with Nitrogen to increase shelf life and eliminate contamination while factory sealed.Extremely high dry- and wet-boiling points help prevent vapor lock and brake fade during hard use.EXTREME THERMAL RESISTANCE AND STABILITY: The elevated dry boiling point of RBF 600 (312°c / 593°F) enables effective braking even under the extreme conditions of competition.VERY EFFICIENT WHEN RAINY: The very high wet boiling point (216°c / 420°F), is superior to conventional brake fluids provides a particularly efficient braking system in rain and put back the apparition of vapor lock. Do not mix DOT 4 brake fluid with silicone (DOT 5 silicone base) or mineral-based fluids (LHM).

Motul RBF 660 Racing Brake Fluid Motul RBF 660 Brake Fluid is 100% synthetic racing  brake fluid (DOT 4) for use in extreme temperature & racing applications. It is suitable for all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Widely exceeds the DOT 3, DOT4 and DOT 5.1 standards (except for DOT 5.1 viscosity at - 40°C). EXTREME THERMAL RESISTANCE AND STABILITY Very high dry boiling point (325°C / 617°F), superior to conventional DOT 5.1 non silicone base, DOT 5 silicone base fluids, and DOT4. Motul RBF 660 enables effective braking even under extreme conditions. EFFICIENT WHEN RAINY High wet boiling point (204°C / 400°F) far exceeds the requirements of DOT 3, 4, and 5.1, enabling brake efficiency while rainy. Reduces the risk of “vapor lock”. Amber in color. Do not mix DOT 4 brake fluid with silicone (DOT 5 silicone base) or mineral base fluids (LHM).

The World's Most Advanced Racing Brake Fluid Imagine you're on the race track, hitting the entry to a corner. Your foot hammers down on the brake, and you feel... absolute perfection. That's Halo P1 for you. Developed with Fade Resistant Technology, this specialist brake fluid is the secret sauce for top-tier motorsport enthusiasts worldwide. Why? Because when you're tearing up the track, the last thing you want is a mushy pedal feel. Halo P1 delivers a low and stable compressibility profile over an extended temperature range, not to mention a crazy-high dry boiling point of 341º C (646º F). All of this is to ensure your brake pedal feel remains as strong and consistent as your lap times.Sold in 20oz Bottles. Features & Benefits That'll Make You Weep Tears of Joy Fade Resistant Technology: Keeps your pedal feel consistent, lap after lap, so you can focus on nailing those corners. Pure Methyl Borate Ester Base: The purity level here is so high, it's like the distilled essence of speed itself, ensuring extreme resistance to compression, even when things get hot (and we mean really hot). World-Beating Dry Boiling Point: At 341° C (646° F), it's like this fluid laughed in the face of boiling points and set a new standard. Low Viscosity & High Lubricity: Because your brake system deserves to be as smooth as your driving skills. What Makes Halo P1 The Secret Weapon? While other brake fluids are off playing checkers, Halo P1 is mastering chess. It's not just another methyl glycol borate ester brake fluid; it's a revolution in braking performance. With its unique proprietary manufacturing process, it achieves the highest levels of purity and the lowest compressibility possible, remaining constant over a wide temperature range. This is the highest boiling point of any racing brake fluid on the market, folks. And the lubricity? Off the charts, especially at high temperatures. FAQs That'll Clear the Air Before you rush off to convert your entire garage to a Halo P1 shrine, let's tackle some of those burning questions you might have: Can I use Halo P1 in my daily driver? As much as we love the enthusiasm, Halo P1 is a race-only formula. It's like putting a rocket booster on a bicycle – thrilling, but not recommended. How often should I change my brake fluid with Halo P1? Regular maintenance is key in racing. Check with your team or mechanic, but before every major race is a good rule of thumb. The Call to Action You've Been Waiting For So, are you ready to elevate your racing game to legendary status? To feel the rush of confidence as you brake later and harder, knowing your brake fluid won't let you down? It's time to switch to Halo P1. Your podium awaits.

Outstanding Performance In High-Heat Braking Applications AP Radi-CAL R2 racing brake fluid was developed for the extreme abuse of heavy race cars competing in endurance events. AP Racing Radi-CAL R2 fluid has a dry boiling point of 312º C (593º F), and was developed for racing applications where high brake temperatures are common, e.g. when using carbon discs and very high temperature brake fluid performance is required. Before using AP Racing Radi-CAL R2 fluid, any existing brake fluid should be drained completely from the car's brake system. The system should be thoroughly purged with new R2 and can then be filled completely with new R2 fluid. AP Racing Radi-Cal R2 (Super 600) Brake Fluid Details: Manufacturer: AP Racing Manufacturer part number: AP-CP5600 R2 fluid conforms to and exceeds DOT4 specifications, but should not be used with components made from magnesium Dry Boiling Point: 312º C (593º F) Wet Boiling Point: 195º C (383º F) Bottle Size: 500 ml (16.9 oz.)

Highest Dry Boiling Point On The Market Today AP Racing Radi-CAL R4 racing brake fluid has the highest typical dry boiling point, at 340º C (644º F), of any racing brake fluid currently available on the market today. Radi-CALR4 racing brake fluid has been designed to perform better than any other product at the extremes of heavy-duty braking in top levels of professional racing. AP Racing Radi-CAL R4 has outstanding resistance to vapor lock and pedal fade under the most exacting conditions. A higher vapor lock point means a firmer brake pedal at the extremes of brake temperatures. Enhanced lubricity means R4 is a better lubricant than other market-leading racing brake fluids. This helps extend the life of the metal moving parts in your brake system while increasing system efficiency. Radi-CAL R4 can be mixed with other DOT3 and DOT4 racing brake fluid, but for maximum product performance your braking system should be thoroughly purged with R4 fluid. AP Racing Radi-Cal Pro R4 Brake Fluid Details: Manufacturer: AP Racing Manufacturer part number: AP-CP7005 DOT rating: DOT4 Dry Boiling Point: 340º C (644º F) Wet Boiling Point: 195º C (383º F) Bottle Size: 500 ml (16.9 fl oz)

Brake Fluid Suitable for All Forms of Motorsport AP Racing Brake Fluids like the Radi-CAL R1 are developed for road cars being used in events such as autocross and track days, where drivers need brake fluid with a higher boiling point than that of OEM brake fluid. AP Racing Radi-CAL R1 fluid has the lowest dry boiling point of AP Racing's brake fluid offerings at 269º C / 516º F. It was developed for applications needing more heat resistance than typical OEM brake fluid. AP Racing Radi-CAL R1 Brake Fluid Details: Manufacturer: AP Racing Conforms to FMVSS 116 DOT3 specification Manufacturer part number: AP-CP7551 New Dry Boiling Point: 269º C / 516º F Wet Boiling Point: 140º C / 284º F Bottle Size: 500 ml (16.9 fl oz)

Designed For The Top Levels Of Motorsports AP Radi-CAL R3 was developed for use in very-high-temperature racing conditions. Conforms to and exceeds FMVSS 116 DOT 4 and SAE J1703 and J1704. AP Racing Radi-CAL R3 Racing Brake Fluid is currently one of the most popular brake fluids at the highest levels of professional auto and motorcycle racing. It was specifically developed for coping with extraordinary temperatures, such as those encountered when running a carbon/carbon brake system. To ensure that the fluid stays fresh, AP brake fluids are furnished in 500 ml (16.9 oz) easy-pour plastic bottles with double-sealed caps. When switching your fluid to AP Racing Radi-CAL R3, we recommend purging all of the old fluid from the system. Three to four bottles of fluid are enough to completely replace existing brake fluid and still have enough left over for a bleed at the track to remove any remaining air bubbles. AP Racing Radi-CAL R3 Brake Fluid Details: Manufacturer: AP Racing Manufacturer part number: AP-CP5660 UPC: 48238040081 DOT Rating: DOT 4 Dry Boiling Point: 325º C (617º F) Wet Boiling Point: 195º C (383º F) Compatible with other DOT 4 fluids: Yes Bottle size: 16.9 fl oz (500ml)