C3 Carbon
C3 Carbon Ferrari F12 Carbon Fiber Shift Paddles
$799.99
C3 Carbon Ferrari F12 Carbon Fiber Shift Paddles
Direct replacements for the factory fitted shift paddles on the Ferrari F12, these beautifully finished and easy to install carbon fiber shift paddles from C3 Carbon add style to your F12.
C3's autoclaved, pre-impregnated dry 3k Carbon Fiber Shift Paddles install easily, fit perfectly, and perform flawlessly. C3 has matched the OEM Ferrari 1x1 weave for a perfect original Ferrari appearance. This a must-have for any F12 owner.
All 2012+ Ferrari F12 models
FEATURES:
Autoclaved pre-preg dry 3k carbon fiber with 1x1 weave matched to Ferrari OEM carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
"UP" and "DOWN" are silk-screened on the respective paddle
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Airbox Cover
$1,649.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Airbox Cover
Ferrari displays the 488's beautiful turbocharged V8 engine under a glass bonnet, but the stock black plastic airbox cover isn't up to the job. C3's autoclaved, pre-impregnated dry 3k Carbon Fiber Airbox fits and functions as perfectly as the factory piece and brings the beauty of carbon fiber to your engine bay. C3 has matched the OEM Ferrari 1x1 weave for a perfect original Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner.
All 2016+ Ferrari 488 models
FEATURES:
Autoclaved pre-preg dry 3k carbon fiber with 1x1 weave matched to Ferrari OEM carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Fuel Pump Covers
$449.99
C3 Carbon Ferrari 458 Carbon Fiber Fuel Pump Covers
The factory trim pieces that cover the Ferrari 458's high-pressure fuel pumps are unattractive black plastic. This oversight detracts from the look of the engine (more so when it is surrounded by C3 Carbon Fiber Engine Covers).  That's easily rectified with C3 Carbon Fiber Fuel Pump Covers!  Made from aerospace-grade autoclaved pre-preg dry carbon fiber, matched to Ferrari's traditional 1x1 3K plain weave pattern, they are a perfect complement to Ferrari factory carbon or C3 Carbon Fiber Engine Cover pieces. Installation is very straightforward.
FEATURES:
Autoclaved pre-preg dry carbon fiber construction with 1x1 3K plain weave matching factory Ferrari carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
KIT INCLUDES:
Two C3 Carbon Fiber Fuel Pump Covers
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Airbox Cover
$1,495.00
C3 Carbon Ferrari 458 Carbon Fiber Airbox Cover
FITS:Â 2010+ Ferrari 458 (Coupe and Spider)
Ferrari displays the 458's beautiful V8 engine under a glass bonnet, but the stock black plastic airbox doesn't do it justice. C3's autoclaved, pre-impregnated dry carbon fiber 458 Airbox fits and functions as perfectly as the factory piece and brings the beauty of carbon fiber to your engine bay without the crazy Ferrari price.
C3 matches the OEM Ferrari 1x1 carbon weave for a perfect original Ferrari appearance. Easy installation makes this a must-have for any 458 owner.
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matched to Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
