Brake Rotors

Girodisc McLaren 390mm Front Rotors These Girodisc 2-piece front rotors are a direct replacement for McLaren applications equipped with 390 mm front brakes. They reduce unsprung weight and improve cooling for repeatable performance on street and track. A1-206  Vehicle Fitment McLaren 600LT  McLaren 720S Lightweight, High-Performance Rotor Assemblies The rotor rings are machined from proprietary high-carbon iron to Girodisc specifications for durability and thermal stability. The 48 curved vanes act as a centrifugal pump, pulling air through the hub for excellent cooling under heavy braking. The serviceable two-piece design allows the aluminum hats to be reused with front replacement rings (D1-206). A1-206  Features Direct OEM replacement, no modifications required 2-piece floating rotor assemblies reduce unsprung weight High-carbon iron rings for consistent braking performance 48 curved vanes for efficient cooling Reusable 6061-T6 aluminum hats with black anodized finish Manufactured and assembled in Bellingham, WA Girodisc McLaren 390mm Front Rotors FAQs: Are these rotors a direct fit? Yes, they bolt on with factory calipers and hardware for 390 mm front brake applications. Do they work with OEM pads? Yes, and they are compatible with performance pad compounds. Can I reuse the hats when the rings wear out? Yes, use D1-206 front replacement rings. Are these suitable for track days? Yes, they are designed for repeated heat cycles with strong cooling. Related Products A2-206 Girodisc McLaren 390mm Rear Rotors D2-206 Girodisc McLaren 390mm Rear Replacement Rings D1-206 Girodisc McLaren 390mm Front Replacement Rings

A1-211 Girodisc 2pc Front Brake Rotors Fits Chevy Camaro ZL1 (Gen 6), Front The Girodisc system is a direct replacement for the OE disc, but a different brake pad with an annulus (pad swept area) of 66mm or less must be used. We strongly recommend the Pagid 8081. This reduction in rotor annulus is done to keep the weight of the rotors low. The OEM rotors utilize a pillar vane design which is horribly inefficient in terms of dissipating heat. Since the OEM rotors heat-soak very easily, Chevrolet chose an easy solution to this problem: increasing the rotors' mass to combat that heat. We weighed an OEM rotor at 32.5 lbs. -- holy smoke! Girodisc took the functional route instead, engineering a shorter-annulus rotor ring for a total rotor-and-hat weight of 28.0 lbs. This design utilizes 72 directional cooling vanes for an incredibly efficient and robust package. The necessary pad shape is very common, found on other Camaro and Corvette applications equipped with six-piston calipers. If there's a specific pad compound you're after please contact us at (844) 438-7244 and we'll get you what you need! The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-216 Girodisc Two-Piece Front Brake Rotors FITMENT: Audi RS4 and RS5 (B9), Front Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

Girodisc A1-220 Two-Piece Floating Front Racing Brake Rotors FITMENT: BMW F80 M3 (incl. CS) w/ CCB (gold calipers) BMW F82 M4 (incl. CS) w/ CCB (gold calipers) BMW F87 M2/M2 Competition/M2 CS (red or silver calipers) BMW F87 M2 CS w/ CCB (gold calipers) Racing Brake Rotors To Replace Your Fragile BMW Rotors Whether you have a BMW M2 with red or silver calipers and drilled rotors or a BMW M2, M3, or M4 with gold calipers and the OEM CCB, this Girodisc floating iron rotor system is a direct replacement for your BMW front rotors. No modifications to your car are necessary. The 400mm diameter rotors will bolt directly to your BMW and work with the original red, silver, or gold calipers (depending on your model) perfectly. By upgrading your BMW CCB brakes with lightweight high performance iron replacements, your factory bias is maintained as well as your ABS efficiency. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-232 Girodisc Two-Piece 390mm Front Brake Rotors FITMENT: Nissan GT-R (DBA, 2012+), Front 390mm OEM Rotors Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors on 2012+ DBA cars. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-238 Girodisc Two-Piece 380x32 Front Brake Rotors FITMENT: Porsche GT3 Cup (991), Front Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a 380mm x 32mm two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter (8 lbs. per corner) than the OEM Porsche brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-239 Girodisc Two-Piece Front Brake Rotors FITMENT: Chevy Camaro ZL1 (Gen 5) Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by class 12.9 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-242 Girodisc Two-Piece Front Brake Rotors FITMENT: Chevy Corvette Z51 (C8), Front Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by class 12.9 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-249 Girodisc Two-Piece 380mm Front Brake Rotors FITMENT: Nissan GT-R (CBA) 2007-2011, Front w/ 380mm stock rotors Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by class 12.9 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-266 Girodisc Two-Piece 380mm Front Brake Rotors FITMENT: Porsche Cayman GT4 Clubsport, Front This Girodisc system is a 380mm two-piece steel rotor and aluminum hat combination, a direct-replacement upgrade for the one-piece OEM Cayman GT4 Clubsport steel brakes. The Girodisc A1-266 will bolt directly to your Porsche GT4 Clubsport and will work perfectly with your OEM calipers. There are two main reasons for replacing your OEM rotors: first, the Girodisc rotors are designed to shed heat more effectively than the original rotors; second, the slotted Girodisc A1-266 will far outlast the OEM drilled rotors. When subjected to intense heat in a racing or track-day environment, the drilled holes in the OEM rotors form cracks which can lead to rotor failure. When paired with the Girodisc A2-266 rear rotors, your factory brake bias and ABS efficiency are maintained. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by class 12.9 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

Girodisc A1-272 Two-Piece Floating Racing Brake Rotors These Rotors Fit The Following Cars (w/ OEM Steel Rotors) Porsche 992 GT3, Front Porsche 992 GT3RS, Front The Girodisc system is a direct replacement for the OEM disc on the 992 Porsche GT3 and GT3RS with OEM iron rotors. No modifications are necessary, allowing use of unmodified factory pad shapes (unlike most racing rotors for this Porsche). The Girodisc rotors will bolt directly to your car and work perfectly with the excellent OEM Brembo calipers. By upgrading your brakes with lightweight, high performance replacements -- as opposed to a big brake kit -- the brake bias and ABS actuation dialed-in by Porsche engineers are preserved. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by class 12.9 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-273 Girodisc Two-Piece Front Brake Rotors FITMENT: Tesla Model S Plaid, Front Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by class 12.9 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-276 Girodisc Two-Piece 410mm Front Brake Rotors FITMENT: Porsche GT3 (992) w/ factory PCCB Porsche GT3RS (992) w/ factory PCCB This 410mm Girodisc conversion system is a direct front rotor replacement for the Porsche 992 GT3 and GT3RS originally equipped with PCCB brakes. These two-piece floating iron rotors with aluminum hats will bolt directly to your Porsche and work flawlessly with the OEM front calipers. You must use must use the pad shape used on the 992 GT3/GT3RS with iron rotors. The annulus (pad swept height) of these rotors is smaller than the PCCBs to keep rotor weight low and allow far better pad selection. By upgrading your brakes with lightweight, high-performance Girodisc rotors, especially when paired with Girodisc A2-154 rear rotors, your Porsche's factory brake bias and ABS efficiency are maintained. The low rotational mass and unsprung weight of Girodisc rotors allows for quick acceleration and fast transient suspension response. Most racers replace the factory PCCBs with Girodisc rotors to avoid the inevitable damage to fragile carbon-ceramic discs when swapping wheels at the track. We suggest using these rotors with these Pagid 4924 or PFC brake pad profiles normally used in the Porsche 991 GT3 without PCCB. When combined with Competition Motorsport RF1 Racing brake fluid or the New HALO P1 High Performance Brake Fluid, you'll have an extremely reliable and durable solution to cracked or broken carbon-ceramic rotors at a fraction of the cost of factory PCCBs. The central hat section of the Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

Girodisc A1-291 Two-Piece Floating Front Brake Rotors FITMENT: Porsche Cayman GT4RS (oem steel rotors), Front This Girodisc system is a direct replacement for the OEM drilled front iron rotors on the Porsche 718 Cayman GT4RS. No modifications are necessary when installing these Girodisc rotors, allowing use of unmodified factory pad shapes (unlike most aftermarket racing rotors for the GT4RS). The Girodisc rotors will bolt directly to the car and work with the excellent OEM Brembo calipers perfectly. By upgrading your Porsche's brakes with lightweight, high performance Girodisc floating rotors (as opposed to a big brake kit), both the brake bias and ABS actuation dialed in by Porsche engineers are preserved. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by class 12.9 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-308DS Girodisc Mercedes 360mm Front Rotors (Dimpled & Slotted) These Girodisc A1-308DS 2-piece dimpled and slotted front rotors are a direct replacement for factory 360 mm front rotors on Mercedes performance models. The floating two-piece design reduces unsprung weight and improves cooling, while the surface pattern enhances pad bite and gas evacuation. Vehicle Fitment Mercedes-AMG / Mercedes models using 360 mm front rotors Factory OEM 360 mm brake systems on select AMG / performance models High-Performance Dimpled & Slotted Design The 48 curved vane internal structure pulls cooling air through the rotor like a centrifugal pump. Combined with high-carbon iron rings and reusable aluminum hats, this design delivers excellent thermal stability and cost-effective service. Features Direct OEM replacement for 360 mm front rotors Dimpled & slotted rotor surface improves bite and pad cleaning 2-piece floating rotor design reduces unsprung weight High-carbon iron rings with reusable aluminum hats 48 curved vanes for outstanding cooling Manufactured and assembled in Bellingham, WA A1-308DS Girodisc Mercedes 360mm Front Rotors FAQs: Are these a direct fit? Yes, they bolt to factory hubs and work with OEM calipers. Do they work with OEM pads? Yes, and they are compatible with performance pad compounds. Can I replace just the rings later? Yes, reuse the hats with D1-308DS replacement rings. Why dimpled & slotted instead of drilled? The pattern improves bite and gas evacuation while minimizing cracking risk versus fully drilled rotors. Related Products A1-308DS Girodisc Mercedes 360mm Front Rotors (Dimpled & Slotted) A2-148DS Girodisc Mercedes 360mm Rear Rotors (Dimpled & Slotted) D1-308DS Girodisc Mercedes 360mm Front Replacement Rings (Dimpled & Slotted) D2-123DS Girodisc Mercedes 360mm Rear Replacement Rings (Dimpled & Slotted)

A1-320 Girodisc Corvette C8 Z06, E-Ray Front Iron Rotor Conversion These Girodisc A1-320 2-piece front iron rotors are a direct bolt-on conversion for the Corvette C8 Z06 and E-Ray. They reduce unsprung weight and improve thermal performance while retaining street-friendly operation and full compatibility with factory calipers. Vehicle Fitment Chevrolet Corvette C8 Z06 (Front) Chevrolet Corvette C8 E-Ray (Front) High-Performance Two-Piece Design High-carbon iron rings are mated to reusable aluminum hats. The 48 curved vane internal design pulls cooling air through the rotor for consistent performance under repeated heavy braking. When the rings wear out, replace them with D1-320 to refresh your setup without buying complete rotors again. Features Direct bolt-on conversion for C8 Z06 and E-Ray (front) 2-piece floating rotor design reduces unsprung weight High-carbon iron rings for superior thermal stability 48 curved vanes for efficient cooling Reusable aluminum hats with black anodized finish Manufactured and assembled in Bellingham, WA A1-320 Girodisc Corvette C8 Z06, E-Ray Front Iron Rotor Conversion FAQs: Does this kit work with OEM calipers? Yes, it bolts on and works with factory calipers and lines. Can I replace just the rings later? Yes, use D1-320 398 mm front replacement rings. Is this suitable for track use? Yes, it is engineered for high heat loads and repeated braking cycles. Does it change ABS or brake bias? No, rotor dimensions are designed to maintain OEM system behavior. Related Products A1-320 Girodisc Corvette C8 Z06, E-Ray Front Iron Rotor Conversion A2-319 Girodisc Corvette C8 Z06, E-Ray Rear Rotors D1-320 Girodisc Corvette C8 398mm Front Replacement Rings D2-319 Girodisc Corvette C8 Z06, E-Ray Rear Replacement Rings