Sparco Racing Seats

The Sparco ADV XTS carbon fiber racing seat is in stock at the lowest price only at Competition Motorsport

Sparco Sparco ADV XT Carbon Racing Seat $11,347.00

Sparco ADV XT Carbon Racing Seat The Sparco ADV XT is an extremely strong, ultra-lightweight carbon fiber racing seat designed to exceed the FIA’s most stringent seat homologation standard, FIA 8862-20091. This means the Sparco ADV XT has been tested to an impact of approximately 70G. This rating is required for GT racing, and the ADV XT was specially designed with a more relaxed, comfortable driving position for GT cockpits. With strength at the top of its class, the ADV XT can withstand over 6,600 lbs. of lateral force. The ADV XT has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric, plus a special non-slip fabric in the shoulders and seat area. 1 Note: The Sparco ADV XT is FIA approved when installed with Sparco 0049605 side-mount brackets (sold separately). Sparco ADV XT Carbon Racing Seat Details Manufacturer: Sparco Manufacturer part no.: 008002ZNR Seat shell: ultra-lightweight carbon fiber construction Upholstery: special non-slip, fire retardant fabric Homologation: FIA 8862-2009 approved1 Tested to an impact of 70G Designed for GT cockpits with more relaxed driver position HANS device compatible Sparco ADV XT Racing Seat Dimensions

Sparco Sparco ADV Elite Carbon Racing Seat $11,347.00

Sparco Racing Seats ADV Elite Carbon The Sparco ADV Elite is an extremely strong, ultra-lightweight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-20091. This means that the ADV Elite has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the ADV Elite was specially designed with an upright driving position preferred by rally drivers. In addition to the Sparco ADV Elite's rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the ADV Elite can withstand over 6,600 lbs. of lateral force. The ADV Elite has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. Sparco ADV Elite Carbon Racing Seat Details Manufacturer: Sparco Manufacturer part no.: 00849ZNR Seat shell: ultra-lightweight carbon fiber construction Upholstery: special non-slip, fire retardant fabric Homologation: FIA 8862-2009 approved Impact testing: to 70G Driving position: designed for WRC rally cockpits HANS device compatible 1 Note: The Sparco ADV Elite is FIA approved when properly mounted using the Sparco 004988ADV side mount brackets. Racing Seat Dimensions

Sparco Sparco QRT-C Performance Carbon Racing Seat $3,261.00

Sparco QRT-C Performance Carbon Racing Seat The QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY Ultralight Carbon Fober Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved QRT-C PERFORMANCE CARBON DIMENSIONS

Sparco Evo Carbon Fiber 008007ZNR Race Seat

Sparco Sparco EVO Carbon Fiber (STD, L, XL) Racing Seat $2,410.00

Sparco EVO Carbon Fiber Racing Seats As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover). The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SIZINGEVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) The Sparco EVO QRT Racing Seat TECHNOLOGY Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsFire retardant fabricSpecial non-slip fabricFIA 8859-1999 approved The Sparco EVO CARBON FIBER Racing Seat SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO 008007ZNR – Medium (up to 34” waist) EVO L 008013ZNR – Large (up to 36” waist) EVO XL 008015ZNR – Extra Large (38” waist) The Sparco EVO Carbon Fiber Racing Seat DIMENSIONS EVO Std Dimensions: EVO L / XL Dimensions:

Sparco Sparco QRT-K Carbon Kevlar Racing Seat $2,410.00

Sparco QRT-K Carbon Kevlar Racing Seat The QRT-K is a full Carbon Kevlar version of the QRT-R. The QRT-K looks amazing with the exposed yellow/black Carbon Kevlar weave. The QRT-K is one of the lightest seats on the market. The QRT-K weighs 13.5lbs fully trimmed (with padding, cover and harness guides) and is constructed from “Pre-Preg” aerospace grade Carbon Kevlar. The QRT-K was specifically designed for a larger driver and it can fit a 36” waist (pants size) driver. The QRT-K is unique because it was designed to fit a larger driver but has excellent fitment into smaller cockpits. The QRT-K requires the special QRT Side mounts (#600QRT) which allows the seat to be raked back for a comfortable ergonomic seating position. The QRT-K is FIA approved. SIZING Large fits up to a 36” waist (pants size) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY Ultralight Carbon Kevlar Composite Shell - 13.5lbs including cover and padding Visible carbon kevlar weave Excellent fitment into small cockpits Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved QRT-K CARBON KEVLAR DIMENSIONS

Sparco Sparco QRT-C Carbon Racing Seat $2,410.00

Sparco QRT-C Carbon Racing Seat Sparco's fantastic QRT-C Carbon is an all-carbon fiber version of the incredibly popular Sparco QRT-R. The QRT-C is the lightest large-size carbon fiber seat on the market. Weighing in at a mere 12 lbs (with padding and cover), the Sparco QRT-C Carbon is constructed from pre-preg aerospace-grade carbon fiber, also known as dry carbon. The Sparco QRT-C Carbon was designed specifically for a larger driver, comfortably fitting a driver with up to a 36-inch waist. However, the Sparco QRT-C Carbon has a unique trick up its sleeve. Although it was designed to fit a larger driver, its intelligent design allows for excellent fitment into smaller cockpits. The Sparco QRT-C uses Sparco's special QRT Side Mounts (#600QRT) which allow the seat to be racked back into a very comfortable seating position. The Sparco QRT-C Carbon is FIA approved. What Is Sparco's QRT Technology? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Carbon Racing Seat Details: Manufacturer: Sparco Manufacturer part no.: 008025ZNR Construction: Ultra-light carbon fiber Weight: 12.0 lbs (5.5 kg) fully trimmed Excellent fitment into small cockpits Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved Sparco QRT-C Racing Seat Dimensions:

Sparco Sparco QRT Performance Racing Seat $2,268.00

Sparco QRT Performance Racing Seat An Amazingly Light and Supremely Comfortable Racing Seat The Sparco QRT Performance seat represents the luxury evolution of Sparco's revolutionary QRT-R race seat. The QRT-R was the first seat to feature Sparco’s patented lightweight QRT technology, and the QRT Performance uses the same FIA race shell but is covered in rich Italian leather and Alcantara. Each Sparco QRT Performance is hand-stitched in the Sparco OEM factory in Torino, Italy. The QRT Performance has a unique CAD design featuring a lower seating position for taller drivers while maintaining exterior dimensions that fit into smaller cockpits. The QRT Performance holds the driver securely on the race track and is also comfortable for long trips on the road. Experience Sparco's Fantastically Innovative QRT Technology Sparco QRT technology yields an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. This translates to an average weight savings of 30% when compared to standard fiberglass technology. So Sparco QRT racing seats approach the weight of carbon fiber at the price of fiberglass composite. The Sparco QRT Performance Racing Seat requires the Sparco #600QRT side mounts for proper installation. Sparco QRT Performance Racing Seat Details: FIA approved OEM Italian leather and Alcantara Ultra-light QRT fiberglass composite shell reduces weight up to 30% Lower seating position can fit taller/larger drivers Smaller outer dimensions for improved vehicle fitment Available in Black or Red Racing Seat Dimensions:

Sparco Sparco Pro ADV QRT Racing Seat $1,559.00

Sparco Pro ADV QRT Racing Seat The Pro-ADV competition seat is the result of a collaborative partnership between Sparco and FIA. The goal was to identify ways to improve safety. The results are new levels in ergonomics, materials and above all safety, are all found in the Pro-ADV seat. Increased rigidity and the use of impact-absorbing materials are the major advances found in the Pro-ADV.The new PRO ADV QRT is an upgraded evolution of the original PRO ADV. The new PRO ADV QRT features a new head restraint redesign that allows better fitment with vehicles with smaller cockpits. The PRO ADV QRT will fit a medium/large size driver (up to 35 inch waist). The Pro ADV QRT is made with all-new QRT Technology which results in an ultra-light shell. The Pro-ADV QRT is FIA-approved. WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent head and shoulder protection Special non-slip fabric for shoulders and bottom cushion Excellent ergonomics Fire retardant fabric FIA approved DIMENSIONS

Sparco Sparco Circuit QRT Racing Seats (Circuit II QRT) $1,559.00

Sparco Circuit / Circuit II QRT Racing Seat The Circuit QRT is an ultra-light competition seat specifically designed for circuit use. Made from aramadic fiber-reinforced fiberglass with all-new QRT technology, the Circuit QRT has an ultra-light shell. The Circuit QRT includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body. The Circuit QRT is FIA approved and available in two sizes: Circuit QRT (Standard) and Circuit II QRT (Large). QRT TECHNOLOGY QRT technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach weight of carbon fiber seat at the price of a fiberglass composite seat. TECHNOLOGY QRT technology – 30% weight savings Ultra-light Aramadic fiber-reinforced fiberglass shell Integrated head bolsters for greater safety HANS device compatible Fire retardant fabric FIA approved DIMENSIONS

Sparco Sparco EVO XL QRT-X Racing Seats $1,417.00

Sparco EVO XL QRT-X Racing Seat Feel the track beneath you and conquer each curve as you settle into the Sparco EVO XL QRT X-Range, the throne of speed designed exclusively for the true racing enthusiast. With state-of-the-art technology and unmatched comfort, this seat isn’t just part of your car; it’s your partner in the race against time. Features and Benefits: Advanced QRT Technology: Utilizing Sparco's patented Quick Resin Tech, the EVO XL QRT X boasts an ultralight fiberglass composite shell, reducing weight by up to 30% compared to traditional seats. Feel the difference as this feather-light yet rugged seat bolsters your control and speed. Water Repellant and Dust Resistant: The innovative seat cover not only repels water but dries quickly, making it perfect for unpredictable weather. The dust-resistant material keeps your cockpit pristine and maintenance low. Enhanced Comfort and Ergonomics: With additional padding atop the side bolsters, the discomfort of climbing in and out is a thing of the past. The seat's back angle offers the most recline in Sparco's range, ensuring a comfortable drive, no matter the distance. Optimal Fit for All Sizes: Available in three sizes—Medium, Large, and X-Large—this seat ensures a perfect fit for every driver, supporting a waist size up to 38 inches. Safety First: FIA approved and crafted with fire retardant fabric and special non-slip material, the EVO XL QRT X doesn’t just elevate your driving experience; it enhances your safety on the track. Specifications: Sizing Options: Medium (up to 34” waist), Large (up to 36” waist), X-Large (38” waist) Materials: Ultralight QRT fiberglass composite, water repellant and dust resistant cover, fire retardant and non-slip fabric Approval: FIA certified FAQs: Q: How do I clean the seat cover? A: Simply wipe down with a damp cloth. The water-repellant and dust-resistant features make cleaning effortless. Q: Can this seat fit into any racing vehicle? A: Absolutely! Its excellent fitment is designed for even the smallest cockpits, making the EVO XL QRT X a versatile choice for any racer. Call to Action: Ready to feel every turn and accelerate your racing performance? Upgrade to the Sparco EVO XL QRT X-Range Racing Seat today and transform your car into a champion’s chariot. Click here to claim your seat at the front of the pack!

Sparco Sparco Pro 2000 QRT Martini Racing Seat $1,417.00

Sparco Pro 2000 QRT Martini Racing Seat ICONIC MARTINI RACING MOJO INJECTED INTO SPARCO'S ICONIC PRO 2000 The Pro 2000 QRT Martini Racing Edition (size Medium only, up to a 34” waist) is a limited production seat. It features the Iconic Martini Racing stripes and is available in period correct Navy or Grey. The Pro 2000 QRT Martini Edition is designed for a medium size driver with a waist size up to 34 inches. The Pro 2000 QRT Martini Edition is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT Martini Edition is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT Martini Edition is a unique FIA seat as it can be bottom mounted in addition to the traditional side mounting. This gives additional installation options. EVOLUTION OF AN ICON The Pro 2000 QRT is an evolution of Sparco's iconic Pro 2000 seat. The Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium size driver with a waist size up to 34 inches. The Pro 2000 QRT is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT is FIA approved. WHAT IS QRT TECHNOLOGY? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio, generating the lightest fiberglass composite seat shells currently on the market. In fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. SPARCO PRO 2000 QRT RACING SEAT TECHNOLOGY QRT ultra-light fiberglass composite shell Excellent fitment into small cockpits Adjustable lumbar cushions Excellent ergonomics Fire retardant fabric FIA approved SPARCO PRO 2000 QRT DIMENSIONS

Sparco Sparco Rev Racing Seat $1,276.00

Sparco Rev Racing Seat The Ideal Racing Seat for Smaller Cockpits The Sparco Rev is a light-weight competition seat is that offers performance, safety and styling. Evolved from the Evo seat, the Rev is designed for the smaller driver. Constructed with a special non-slip fabric in the shoulder and cushion, the Rev features silver harness slots and signature Sparco embroidery. The Sparco Rev racing seat is FIA approved. Sparco Rev Racing Seat Details: Specifically designed for the smaller driver Ultra-light fiberglass composite shell Re-proportioned seat design provides excellent ergonomics Hans device compatible Fire retardant fabric Special non-slip fabric FIA approved Sparco Rev Dimensions:

Sparco Sparco Grid Q Racing Seat $1,276.00

Sparco Grid Q Racing Seat The Sparco Grid Q racing seat was designed to provide the ultimate lateral support, racing ergonomics and driver safety. This unique design incorporates individual padding that is attached by Velcro. This padding design allows for ventilation channels. The Sparco Grid Q features a brand new shell design that has deep side bolsters and very supportive shoulder bolsters for excellent lateral hold. In addition to the unique padding and shell design, the Sparco Grid Q is now made with Sparco's amazing QRT technology which results in an ultra-light shell. The side cushion can be removed to give more room for a larger fit. The Sparco Grid Q features harness slots that can accommodate a large range of drivers. The Sparco Grid Q is FIA approved SPARCO QRT TECHNOLOGY EXPLAINED QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach the weight of carbon fiber seat at the price of a fiberglass composite seat. SPARCO GRID Q RACING SEAT FEATURES QRT technology – 30% weight savings Ultra-light fiberglass composite shell Harness slots that can accommodate a wide range of drivers Removable padding Hans device compatible Fire retardant fabric Special non-slip fabric SPARCO GRID Q DIMENSIONS

Sparco Sparco Pro 2000 QRT Racing Seat $1,276.00

Sparco Pro 2000 QRT Racing Seat QRT TECHNOLOGY LIGHTENS THE ICONIC SPARCO PRO 2000 The Pro 2000 QRT is an evolution of Sparco's iconic Pro 2000 seat. The Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium-sized driver with a waist size up to 34 inches. The Pro 2000 QRT is Sparco's deepest bolstered seat, giving the driver exceptional lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT is made with all-new QRT Technology, resulting in an ultra-light yet incredibly strong outer shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Sparco Pro 2000 QRT is FIA approved. WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. SPARCO PRO 2000 QRT TECHNOLOGY QRT ultra-light fiberglass composite shell Excellent fitment into small cockpits Adjustable lumbar cushions Excellent ergonomics Fire retardant fabric FIA approved SPARCO PRO 2000 QRT DIMENSIONS

Sparco Sparco EVO QRT (S, STD, L, XL) Racing Seat $1,276.00

Sparco EVO QRT Racing Seats QRT ULTRA-LIGHT TECHNOLOGY IMPROVES SPARCO'S ICONIC RACING SEATS The EVO QRT competition seat has been redesigned with new improved updates. The EVO QRT is now made with all-new QRT Technology which results in an ultra-light shell. The EVO QRT has been updated from the previous EVO seat with a reduced shoulder bolster dimension that allows fitment into smaller cockpits but can still accommodate a medium size driver. Also the shoulder harness belt openings have been raised to accommodate a taller driver. The EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The EVO QRT is FIA approved. SPARCO EVO QRT RACING SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO S – Small (up to 32” waist) EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. SPARCO EVO QRT TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent fitment into small cockpits 4 Sizes: Small through XL Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved SPARCO EVO QRT DIMENSIONS EVO S Dimensions: EVO Std Dimensions: EVO L / XL Dimensions:

Find anything you need

Racing seats from Sparco are known around the world as being among the highest-quality, most technically advanced, and most popular racing seats available.