Seat Accessories

Recaro Flexible Side Mount for XL Size Seats This Kit Fits the Following Seats: Recaro Pro Racer SPA XL Recaro Pro Racer SPG XL FIA Approved Racing Seat Flexibility The Recaro Flexible Adapter bracket for the P 1300 GT advanced racing shell gives your Recaro full forward and backward sliding movement. The Recaro Flexible Adapter is the only FIA approved sliding mounting bracket for the Recaro XL racing seat. It was designed by Recaro specifically for endurance races where driver changes need to be done in seconds. The Recaro Flexible Adaptor seat mount is among the most robustly design slider mounts we've ever seen. The Flexible Adapter mount is a reinforced side mount and slider assembly intended for professional endurance racing. This FIA-certified seat slider has extra reinforcing braces on the front and rear which eliminate a lot of the lateral movement seen in traditional, un-reinforced side mount brackets. This Recaro high strength seat slider/mount combination is just the thing to keep you planted firmly in place. Even the bright red, attention-grabbing slider hand bar is overbuilt. This slider and mount system only works with the Recaro XL-size seats. Check out the standard-size version here. See the Recaro Flexible Adapter Side Mount in Action Recaro racing seat (pictured) sold separately.

Recaro Flexible Side Mount (Standard Size) This Kit Fits the Following Seats: Recaro Pro Racer SPA Recaro Pro Racer SPG Recaro P1300 GT Recaro P1300 GT LW FIA Approved Racing Seat Flexibility The Recaro Flexible Adapter bracket for the P 1300 GT advanced racing shell gives your Recaro full forward and backward sliding movement. The Recaro Flexible Adapter is the only FIA approved sliding mounting bracket for the Recaro racing seat. It was designed by Recaro specifically for endurance races where driver changes need to be done in seconds. The Recaro Flexible Adaptor seat mount is among the most robustly design slider mounts we've ever seen. The Flexible Adapter mount is a reinforced side mount and slider assembly intended for professional endurance racing. This FIA-certified seat slider has extra reinforcing braces on the front and rear which eliminate a lot of the lateral movement seen in traditional, un-reinforced side mount brackets. This Recaro high strength seat slider/mount combination is just the thing to keep you planted firmly in place. Even the bright red, attention-grabbing slider hand bar is overbuilt. This slider and mount system only works with the Recaro standard-size seats. Check out the XL version here. See the Recaro Flexible Adapter Side Mount in Action Recaro racing seat (pictured) sold separately.

AMT Ultra-Low Seat Mount For Corvette C5 Through C8 Sub Strap Mount Included The Best Way to Put Proper Seats in Your Corvette Throughout the years, the iconic Corvette has been equipped from the factory with many great features. Unfortunately, the seats aren't one of them. Those Corvette drivers who have added a proper racing seat to their Corvette often say it's the most important mod they've made to increase their track-day enjoyment and safety. However, a proper racing seat should be mounted from the side on fixed mounts, not using the OEM seat hardware. As a result, headroom becomes a concern with any racing seat in a Corvette, but AMT Motorsports has effectively eliminated that concern with the Ultra-Low Seat Mount. The Benefit of Innovative Design Countless development hours were spent making the Ultra-Low Seat Mount the best available for the Corvette. (The only way to get your seat lower in your car is to cut a hole in it!) The bottom of the seat can literally touch the floor in your Corvette. By machining a perfect hex in the mounts to accept the mounting bolts for the side brackets, AMT maximizes seat clearance. This machined hex also removes an extra wrench (and a whole lot of headache) from the install process. These seat mounts are machined from 6061-T6 extruded aluminum. Rather than allow the side brackets to only sit on bolts, AMT machines the brackets so there's a perfect mechanical interface with the bottom and side of each floor mount, increasing stiffness and strength. Included with every mount are studs and hardware to allow the mount to be bolted using the factory Corvette seat studs. Sub Strap Bar Included Finally, there's a movable cross bar to accept five- and six-point sub straps. This sub-strap bar is bolted to the floor mounts with flat head screws, and there are two more holes in the cross bar in case your sanctioning body requires you to bolt the bar through the floor. Two eye-bolts are included with the cross bar. We don't recommend using a different sub-strap bar with the AMT mount since you'll need to modify either the mount or the sub-strap bar to get it to fit. Lifetime Guaranteed Quality As with everything AMT makes, these mounts and sub-strap bars are proudly 100% made in the USA. If any part of the mount fails for any reason, AMT Motorsport will replace the offending part free of charge.

CMS Performance Ultimate Race Seat Mounting Kit For Porsche This Kit Fits the Following Vehicles: Porsche 911 Carrera, 2001-2023 (All) Porsche Boxster, 2001-2023 (All) Porsche Cayman, 2006-2023 (All) Introducing Our Complete Race Seat Mounting Kit: The Ultimate Upgrade for Porsche Motorsports Enthusiasts! Are you a Porsche racing or track-day aficionado looking to upgrade your on-track safety and performance? Look no further than the CMS Performance Ultimate Racing Seat Mounting Kit. One of the very best upgrades you can make for driving your Porsche on the race track is adding a dedicated racing seat. CMS Performance designed this kit to give you a complete solution to installing your choice of seat in your Porsche. No mixing-and-matching, hunting for parts and wondering whether it'll all work together. The CMS Performance Ultimate Race Seat Mounting Kit has everything you need! Precision Engineering for Porsche Excellence The CMS Performance Ultimate Race Seat Mounting Kit is precision- engineered, tailor-made to fit a variety of race seats safely and securely in your Porsche. Crafted with meticulous attention to detail from 3/16" carbon steel, this kit draws on our many years of experience with track-prepped Porsches. Let CMS Performance help you unlock the full potential of your high-performance Porsche on the race track. Custom Powder Coat to Match Your Porsche The CMS Performance Ultimate Race Seat Mounting Kit comes standard in a durable black wrinkle-finish powder coat. CMS Performance can also custom powder-coat your kit in just about any Porsche OEM paint color you like. Simply choose "Custom Color" in the dropdown above and specify the Porsche color you want in your Order Notes at check-out. CMS Performance Ultimate Race Seat Mounting Kit Includes: Mounting base w/ integrated sub strap bar (bolts securely to factory Porsche seat mounting holes) Two steel side-mount race seat brackets All necessary hardware (Grade 8) Detailed installation instructions Optional: high-performance race seat slider Key Features of This Kit: Race-Ready Compatibility: Designed to seamlessly integrate with a wide range of racing seats from Sparco, OMP, Racetech and Sabelt. Our mounting kit ensures a perfect fit on the driver and/or passenger side of your Porsche. Whether you drive a 911, Cayman, or Boxster, CMS Performance has you covered. Fully Integrated: The CMS Performance kit includes everything you need to install a racing seat in your Porsche. No mixing-and-matching, so you can spend less time installing and more time racing. Lightweight Durability: Constructed from premium materials, our kit prioritizes strength without compromising on weight. The integrated design puts a premium on maintaining structural integrity. Customization Options: Tailor your installation to perfection with multiple options, including racing sliders and custom powder-coat colors. Enhanced Safety: Safety is paramount in motorsports, and our kit doesn't cut corners. It's designed to meet or exceed industry safety standards, keeping you protected during the most demanding races. Quick and Easy Installation: The CMS Performance Racing Seat Mounting Kit is engineered for straightforward installation and precise fitment. Not included: CMS Performance roll bar and race seats are available separately. Seat mounting kit is shown with optional race seat slider.

Recaro Speed V Seat Brackets Driver Side (7227111.1) Get the perfect mounts for the perfect seat, the Recaro Speed V seat brackets. These brackets are necessary to complete the install of your Recaro Speed V seat. You can get the brackets for the passenger side here. When installing your Recaro seat, why trust any brackets other than those designed and tested for your seat?

Recaro Speed V Seat Brackets Passenger Side (7227111.2) Get the perfect mounts for the perfect seat, the Recaro Speed V seat brackets. These brackets are necessary to complete the install of your Recaro Speed V seat. You can get the brackets for the driver side here. When installing your Recaro seat, why trust any brackets other than those designed and tested for your seat?

Camaro Generation 6 Racing Seat Adapter R-9170 Or R-9171 Everything you need in one place!  Select driver or passenger side, add an optional sub mount bar, select the optional side mounts for your seat and you have everything you need for a clean racing seat installation into your Gen 6 Chevy Camaro! Brey-Krause manufactures high quality performance driving accessories for a variety of cars. Innovative engineering and superior workmanship are hallmarks of Brey-Krause products. All Brey-Krause parts can be installed easily without any modifications, using existing holes and factory mounting points to ensure your safety is never compromised. Whether your car is used on the road or at the race track, Brey-Krause performance driving accessories set the standard in engineering, function, and aesthetic design. Brey Krause R-9170 & R-9171 Fitment These Brey-Krause seat mounts fit the Chevrolet Camaro 6th Gen. It does not work with the Camaro OEM Recaro seats. Brey-Krause Seat Mount Features: Material: Type 304 stainless steel Finish: satin black powder-coat Installation: attaches to factory seat mounting points R-9172 sub strap mount sold separately (see pull-down) Seat side-mount brackets sold separately (see pull-down) Brey-Krause Side Mounts For The R-9170 & R-9171: Cobra Nogaro: R-9775 Sparco Evo, Pro 2000: R-9071, R-9072 Sparco Evo 2: R-9073, R-9074 Sparco Evo 2 Plus: R-9761, R-9762 Sparco Evo 2 US: R-9075, R-9076 Recaro Pole Position, SPG XL: R-9075, R-9076 Recaro SPA, SPG, Pro HANS: R-9755, R-9756 OMP HTE-R: R-9751, R-9752 Brey-Krause Side Mounts When Using Recaro Sliders: Cobra Nogaro: R-9065 Momo Super Cup: R-9060 Sparco Evo: R-9060 Sparco Evo 2, Evo 2 Plus, Corsa: R-9061 OMP HTE-R XL: R-9061 Recaro Pole Position: R-9062 Recaro SPG XL: R-9066 Recaro SPA, SPG, Pro Racer HANS: R-9067 Sub-mount bar, harness brackets, side mounts, and other hardware pictured are for illustrative purposes only.

Brey Krause Camaro Generation 5 Seat Mount R-9173 and R-9174 Everything you need in one place!  Select driver or passenger side, add an optional sub mount bar, select the optional side mounts for your seat and you have everything you need for a clean racing seat installation into your Gen 5 Chevy Camaro! Brey-Krause manufactures high quality performance driving accessories for a variety of cars. Innovative engineering and superior workmanship are hallmarks of Brey-Krause products. All Brey-Krause parts can be installed easily without any modifications, using existing holes and factory mounting points to ensure your safety is never compromised. Whether your car is used on the road or at the race track, Brey-Krause performance driving accessories set the standard in engineering, function, and aesthetic design. Brey Krause R-9173 & R-9174 Fitment These Brey-Krause seat mounts fit the Chevrolet Camaro 5th Gen. It does not work with the Camaro OEM Recaro seats. Brey-Krause Seat Mount Features: Material: Type 304 stainless steel Finish: satin black powder-coat Installation: attaches to factory seat mounting points R-9172 sub strap mount sold separately (see pull-down) Seat side-mount brackets sold separately (see pull-down) Brey-Krause Side Mounts For The R-9173 & R-9174: Sparco Evo, Pro 2000: R-9071, R-9072 Sparco Evo 2: R-9073, R-9074 Sparco Evo 2 Plus: R-9761, R-9762 Sparco Evo 2 US: R-9075, R-9076 Recaro Pole Position, SPG XL: R-9075, R-9076 Recaro SPA, SPG, Pro HANS: R-9755, R-9756 OMP HTE-R: R-9751, R-9752 Brey-Krause Side Mounts When Using Recaro Sliders:  Momo Super Cup: R-9060 Sparco Evo: R-9060 Sparco Evo 2, Evo 2 Plus, Corsa: R-9061 OMP HTE-R XL: R-9061 Recaro Pole Position: R-9062 Recaro SPG XL: R-9066 Recaro SPA, SPG, Pro Racer HANS: R-9067 Sub-mount bar, harness brackets, side mounts, and other hardware pictured are for illustrative purposes only.

Recaro Seat Slider for Recaro Podium Seats This Kit Fits the Following Seats: Recaro Podium Medium Recaro Podium Large ABE Approved Racing Seat Flexibility The Recaro Flexible Adapter bracket for the Recaro Podium advanced seat gives your Recaro full forward and backward sliding movement. The Recaro Flexible Adapter is the only ABE approved sliding mounting bracket for the Recaro Podium seat. It was designed by Recaro specifically for the Podium seat

Recaro XL Size Aluminum Side Mounts This Mount Set Fits the Following Seats: Recaro Pro Racer SPA XL Recaro Pro Racer SPG XL Recaro Profi SPA  XL Recaro Profi SPG  XL Recaro Pole Position Recaro Pole Position ABE FIA Approved Racing Seat Flexibility These Recaro Aluminum Sidemount brackets for the P 1300 GT advanced racing shell provide a lightweight, high-strength FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG XL, or Pole Position racing seat. Strong, rigid, and made specifically for your Recaro XL racing seat, these aluminum side mounts are for drivers who demand the highest quality in their safety gear. Sold in pairs. The Recaro aluminum side mounts can be used with Recaro Pole Position, ABE, Profi XL, Pro Racer SPA XL (FIA Certified) side mounted bucket seats or most other brands as well. Recaro Aluminum Side Mount Features: One pair of aluminum side mounts Lightweight, high-strength construction FIA certified For use with the Recaro Profi SPA/SPG XL, Pro Racer SPA/SPG XL, Pole Position, or Pole Position ABE racing seats

Brey Krause Side-Mount Adapter & Sub Strap Bar The Brey Krause R-9044 Side-Mount Adapter with Integrated Sub-Strap Bar makes installing racing seats in your Porsche straightforward and painless. Designed for the Porsche 996, 997, Boxster or Cayman, the R-9044 does away with your OEM seat sliders, mounting the seat as low as possible in the car and removing excess weight. An integrated sub-strap bar is adjustable for proper 5 or 6-point sub-strap routings. Three front-to-rear fixed mounting points allow your Brey-Krause Side-Mount Adapters (not included) to be installed in several fore-aft positions. Best of all, the entire assembly can be quickly installed before a track event and just as easily removed when you're back home. Voila! The daily driving comfort of your stock seats plus the bolstering and safety of a racing seat when you're at the track.Brey Krause side-mount brackets can be added separately in the dropdown above, creating a ready-to-bolt-in racing seat system! FEATURES: Fits Porsche 911 Carrera (996/997), Boxster & Cayman (986/987) Material: Type 304 Stainless Steel Weight: 4 lbs. Finish: Satin Side mounts not included

C6/C7 Corvette Extra-Low Seat Mount incl. Sub-Bar The Brey-Krause R-9153 driver-side seat mount offers a solution to the low roof-line of the C6 and C7 Chevrolet Corvettes. This racing seat adapter places the seat rails at a slant, allowing the seat to be lower in a rearward position when combined with a Recaro Slider (sold separately). This slant allows the seat to sit higher when in a forward position (perfect for shorter drivers), while offering increased head clearance when adjusted rearward for taller drivers. The Brey-Krause R-9153 bolts directly to the floor of the Corvette, and combines with a Recaro slider to allow the installation of many seat options when used with Brey-Krause side-mounts. Also compatible with the C6 Corvette if you are searching for additional head-room. The mounting kit comes complete with an adjustable integrated Sub-Bar for correct mounting of your 5 or 6 point harness system. The design also allows for the reuse of stock 3-point belts, with inboard/outboard lap belt mounting locations built in. Note: Brey-Krause R-906X series side mount brackets must be purchased separately. NOTE: Although this kit allows for the installation of many brands and models of racing seat, due to the extremely low roof-line and the tight confines of the C7 Corvette, many larger racing seats will not fit. Please contact one of our racing seat experts (844) 438-7244 with questions related to your particular installation. FEATURES: Materials (seat mount): Aircraft-grade aluminum Materials (sub bar): Type 304 stainless steel Finish: Black gloss powder coat Weight: 7.8 lbs / 3.5 kg Car Fitments: C6 and C7 Chevy Corvette coupes (2005 - 2019), including Z51 and Z06. Hardware: all necessary hardware included

Brey Krause R-9775 Cobra Nogaro Seat Mount for Porsche Seat Sliders The Brey Krause R-9775 makes adapting the phenomenal Cobra Nogaro seats to your Porsche's OEM manual sliders (not included)1. It can also be used with the Brey Krause R-9044 Seat Adapter for a lower mounting height and even lighter weight. The Cobra Nogaro is the perfect balance between a full-fledged racing seat (with pass-throughs for harness shoulder and anti-sub belts) and a seat comfortable enough for daily driving or weekend touring. With threaded lap belt bosses on both sides, the R-9775 works on both the driver- and passenger-side. It makes adapting the Nogaro to your OEM Porsche non-powered sliders a breeze. The Schroth Profi II GT3 six-point harness bolts right up, as well as your OEM inboard seat belt receptacle. Add the BK-9030 sub-belt adapter (available in the dropdown above) and you really have the best of both worlds! Brey Krause R-9775 Nogaro Mount Details: Fits all Porsche 996, 997, Boxster/Cayman models with manual seat sliders. Designed to fit Cobra Nogaro Sport Seats. Material: 11 gauge, type 304, stainless steel. Finish: Powder coated in durable black wrinkle-finish. Weight: 4 lbs. Porsche manual seat slider (pictured) not included 1 Porsche OEM manual seat slider assembly (not included) from the 996/986, as well as many 997/987 models, is required for installation. Not compatible with power seat sliders.

Easily Install OMP HTE Seats In Your Porsche The Brey Krause R-9751 Driver-side Racing Seat Side Mount Bracket (for Passenger-side, see R-9752) allows for the easy installation of OMP HTE Racing Seats into Porsche 996, 997, Boxster, and Cayman models using the OEM factory non-power sliders. It can also be used with BK's R-9044 assembly. Designed to keep the seat as low as possible, the four mounting positions provide a wide range of recline options. An inboard threaded seat belt mount is integrated into the adapter. FEATURES: Fits all Porsche 996, 997, Boxster/Cayman (986/987) models with non-power seats. Designed to fit OMP HTE Racing Seats. Material: 11 gauge, Type 304, stainless steel. Finish: Powder coated in durable black wrinkle-finish. Weight: 4 lbs. Note: Factory non-power slider assembly from the 996/986 (and some 997/987s) required for installation. Will not fit sliders with power option.

Recaro Steel Side Mounts for the Pole Position N.G. FIA Approved Racing Seat Side Mounts These Recaro Steel Sidemount brackets for the Pole Position N.G. racing seat provide an FIA-approved mounting system for your Recaro seat. Strong, rigid, and made specifically for your Recaro, this simple side mount system is for drivers who demand the highest quality in their safety gear. Recaro Steel Side Mount Features: One pair of side mounts Steel construction FIA certified For use with the Recaro Pole Position N.G. racing seat