{"product_id":"a2-321-girodisc-rear-brake-rotors-for-audi-c8-s6-s7-c8-2019-2025","title":"A2-321 GiroDisc Rear Brake Rotors for Audi C8 S6\/S7 (C8) 2019–2025","description":"\u003ch1\u003eA2-321 GiroDisc Rear Brake Rotors for Audi C8 S6\/S7 (C8) 2019–2025\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0647\/9242\/8763\/files\/girodisc-glowing-brake-rotor-night-racing-hero-image.jpg?v=1793304915\" alt=\"Girodisc hero featuring a glowing orange rear brake rotor, flying sparks, and vivid reflections on a wet racetrack at night.\"\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrade your Audi's rear braking system with \u003cstrong\u003eGiroDisc A2-321 Two-Piece Floating Rear Brake Rotors\u003c\/strong\u003e. Engineered as direct replacements for the factory rear iron brake rotors on the Audi C8 S6, C8 S7, and D5 S8, these precision-manufactured brake assemblies combine lightweight aluminum hats, proprietary high-carbon iron friction rings, and advanced cooling technology for demanding performance driving.\u003c\/p\u003e\n\u003cp\u003eFeaturing a \u003cstrong\u003e350mm diameter, 28mm thickness, and fully floating two-piece construction\u003c\/strong\u003e, the GiroDisc A2-321 rear rotors are designed to reduce unsprung weight and rotating mass while delivering consistent braking performance. Their serviceable construction allows worn friction rings to be replaced independently of the reusable aluminum hats.\u003c\/p\u003e\n\u003ch2\u003eHigh-Performance 350mm Rear Brake Rotors for Audi C8 S6, S7 \u0026amp; D5 S8\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eGiroDisc A2-321 Rear Brake Rotor Assemblies\u003c\/strong\u003e offer a performance-focused upgrade for Audi S6, S7, and S8 models equipped with factory iron rear brakes.\u003c\/p\u003e\n\u003cp\u003eUnlike conventional one-piece cast iron rotors, GiroDisc's advanced two-piece design combines a high-carbon iron friction ring with a lightweight 6061-T6 aluminum mounting hat. This construction helps reduce unnecessary rotating mass while allowing the rotor components to accommodate differences in thermal expansion during aggressive braking.\u003c\/p\u003e\n\u003cp\u003eEach rotor features \u003cstrong\u003e48 internal curved cooling vanes\u003c\/strong\u003e designed to act as a centrifugal pump, drawing air through the rotor to help dissipate braking heat.\u003c\/p\u003e\n\u003cp\u003eGiroDisc's fully floating mounting system utilizes high-strength steel drive pins, spring clips, and spring washers to provide controlled movement between the rotor ring and hat while maintaining street-friendly operation.\u003c\/p\u003e\n\u003ch3\u003eGiroDisc A2-321 Rear Brake Rotor Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Factory Replacement:\u003c\/strong\u003e Engineered for Audi C8 S6, C8 S7, and D5 S8 models equipped with factory iron rear brakes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350mm Rotor Diameter:\u003c\/strong\u003e Vehicle-specific rear rotor dimensions for the intended factory braking system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Piece Floating Construction:\u003c\/strong\u003e Combines proprietary high-carbon iron friction rings with lightweight aluminum mounting hats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Unsprung Weight:\u003c\/strong\u003e Lightweight construction helps reduce rotating mass at the rear axle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProprietary High-Carbon Iron:\u003c\/strong\u003e Specially formulated cast iron designed to withstand demanding braking conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48 Curved Cooling Vanes:\u003c\/strong\u003e Advanced internal ventilation promotes airflow through the rotor for improved heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 Aluminum Hats:\u003c\/strong\u003e Precision-machined aluminum mounting hats with a durable black anodized finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Floating Hardware:\u003c\/strong\u003e High-strength steel drive pins accommodate thermal expansion between rotor components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Drive Pins:\u003c\/strong\u003e Cadmium-plated steel hardware provides additional corrosion protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreet-Friendly Design:\u003c\/strong\u003e Spring clips and spring washers help control hardware movement and minimize unwanted rattling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Friction Rings:\u003c\/strong\u003e Reusable aluminum hats allow worn rotor rings to be replaced independently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Major rotor components are manufactured in-house by GiroDisc in Bellingham, Washington.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e GiroDisc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e A2-321\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Two-Piece Floating Rear Brake Rotors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Application:\u003c\/strong\u003e Audi C8 S6 \/ C8 S7 \/ D5 S8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Position:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Brake Configuration:\u003c\/strong\u003e Factory Iron Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Outside Diameter:\u003c\/strong\u003e 350mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Thickness:\u003c\/strong\u003e 28mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Rotor Thickness:\u003c\/strong\u003e 26mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Weight:\u003c\/strong\u003e 18.4 lbs per rotor assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Vane Count:\u003c\/strong\u003e 48 Curved Vanes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Ring Material:\u003c\/strong\u003e Proprietary High-Carbon Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Hat Material:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Hat Finish:\u003c\/strong\u003e Black Anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Pin Material:\u003c\/strong\u003e High-Strength Steel Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Pin Finish:\u003c\/strong\u003e Cadmium Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Construction:\u003c\/strong\u003e Two-Piece Fully Floating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Steel Drive Pins, Spring Clips, and Spring Washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Rotor Rings:\u003c\/strong\u003e GiroDisc D2-321\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Location:\u003c\/strong\u003e Bellingham, Washington, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGiroDisc A2-321 Rear Brake Rotors\u003c\/strong\u003e are designed for the following Audi applications equipped with factory iron rear brakes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudi S6 (C8):\u003c\/strong\u003e Factory iron rear brake system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudi S7 (C8):\u003c\/strong\u003e Factory iron rear brake system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudi S8 (D5):\u003c\/strong\u003e Factory iron rear brake system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Note:\u003c\/strong\u003e These rotors are designed specifically for vehicles equipped with factory iron brakes. They are not listed as a direct replacement for factory carbon-ceramic brake systems.\u003c\/p\u003e\n\u003cp\u003eConfirm your Audi's model generation, factory brake package, and original rotor dimensions before ordering. Compatibility with other Audi models or aftermarket brake conversions should not be assumed.\u003c\/p\u003e\n\u003ch2\u003eAdvanced High-Carbon Iron Construction \u0026amp; Rotor Cooling\u003c\/h2\u003e\n\u003cp\u003eGiroDisc manufactures its rotor friction rings from a proprietary high-carbon iron casting formulated to withstand the demands of performance braking.\u003c\/p\u003e\n\u003cp\u003eDuring repeated high-speed stops, brake components experience significant thermal loads. The rotor's material composition and ventilation design play an important role in managing temperatures and maintaining predictable braking response.\u003c\/p\u003e\n\u003cp\u003eEach \u003cstrong\u003eGiroDisc A2-321\u003c\/strong\u003e incorporates 48 internal curved cooling vanes engineered to draw air through the rotor as it rotates.\u003c\/p\u003e\n\u003cp\u003eThe curved vane design acts as a centrifugal pump, pulling cooling air through the internal passages to help dissipate heat from the iron friction ring.\u003c\/p\u003e\n\u003cp\u003eThis advanced cooling construction is designed to support consistent braking performance during spirited street driving and demanding performance applications.\u003c\/p\u003e\n\u003ch2\u003eFully Floating Two-Piece Rotor Technology\u003c\/h2\u003e\n\u003cp\u003eThe GiroDisc A2-321 features a fully floating two-piece construction consisting of a high-carbon iron friction ring attached to a lightweight aluminum mounting hat.\u003c\/p\u003e\n\u003cp\u003eWhen braking temperatures increase, the iron rotor ring and aluminum hat expand at different rates. GiroDisc's floating mounting hardware allows controlled movement between these components to accommodate thermal expansion.\u003c\/p\u003e\n\u003cp\u003eHigh-strength alloy steel drive pins connect the rotor ring to the aluminum hat while maintaining the intended assembly configuration.\u003c\/p\u003e\n\u003cp\u003eSpring clips and spring washers help manage movement between the components and minimize unwanted rattling, providing the benefits of a floating rotor design with street-friendly operating characteristics.\u003c\/p\u003e\n\u003ch2\u003eLightweight 6061-T6 Aluminum Mounting Hats\u003c\/h2\u003e\n\u003cp\u003eEach GiroDisc A2-321 rear rotor assembly uses a precision-machined \u003cstrong\u003e6061-T6 aluminum mounting hat\u003c\/strong\u003e with a black anodized finish.\u003c\/p\u003e\n\u003cp\u003eThe lightweight aluminum construction helps reduce unnecessary rotating and unsprung weight compared with heavier mounting designs.\u003c\/p\u003e\n\u003cp\u003eReducing unsprung mass can benefit suspension response, while minimizing rotating mass can contribute to more responsive vehicle dynamics.\u003c\/p\u003e\n\u003cp\u003eEach complete GiroDisc A2-321 rear rotor assembly weighs approximately \u003cstrong\u003e18.4 pounds\u003c\/strong\u003e, according to the manufacturer's specifications.\u003c\/p\u003e\n\u003ch2\u003eReusable Aluminum Hats \u0026amp; GiroDisc D2-321 Replacement Rings\u003c\/h2\u003e\n\u003cp\u003eOne of the primary advantages of the GiroDisc A2-321 is its serviceable two-piece construction.\u003c\/p\u003e\n\u003cp\u003eRather than replacing the entire rotor assembly when the friction surface becomes worn, compatible replacement iron rings can be installed while retaining the original aluminum mounting hats, provided the hats remain in serviceable condition.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Replacement Rings:\u003c\/strong\u003e GiroDisc D2-321.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum Rotor Thickness:\u003c\/strong\u003e 26mm.\u003c\/p\u003e\n\u003cp\u003eGiroDisc recommends replacing rotor rings when they reach the specified minimum thickness or if a crack develops that extends to the outer edge of the friction ring.\u003c\/p\u003e\n\u003cp\u003eAlways inspect the aluminum hats, mounting hardware, and friction rings during servicing. Follow GiroDisc's replacement-ring installation instructions and hardware requirements.\u003c\/p\u003e\n\u003ch2\u003eDirect Replacement for Factory Audi Rear Iron Brake Rotors\u003c\/h2\u003e\n\u003cp\u003eThe GiroDisc A2-321 is engineered as a direct replacement for the factory rear iron brake rotor assemblies on compatible Audi C8 S6, C8 S7, and D5 S8 vehicles.\u003c\/p\u003e\n\u003cp\u003eThe vehicle-specific configuration is intended to work with the corresponding original brake calipers and mounting arrangement.\u003c\/p\u003e\n\u003cp\u003eThese rotors are not designed as a direct replacement for Audi carbon-ceramic rear brake packages. Vehicles equipped with carbon-ceramic brakes require separate compatibility verification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Follow GiroDisc's installation instructions and applicable Audi service procedures. Verify rotor orientation, brake pad condition, mounting hardware torque, and overall brake system operation before driving.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill GiroDisc A2-321 rear rotors fit my Audi C8 S6?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The GiroDisc A2-321 is designed for Audi C8 S6 models equipped with factory iron rear brakes. Confirm your vehicle's brake configuration and original rotor dimensions before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre GiroDisc A2-321 rotors compatible with the Audi C8 S7?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. GiroDisc lists the A2-321 as a rear brake rotor replacement for compatible Audi C8 S7 applications equipped with factory iron brakes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these rotors fit the Audi D5 S8?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Audi D5 S8 is included in the manufacturer's listed applications for GiroDisc A2-321 rear rotors, provided the vehicle uses the corresponding factory iron brake system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre GiroDisc A2-321 rotors for the front or rear?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe GiroDisc A2-321 assemblies are designed for the rear axle. The corresponding front rotor application is sold separately under GiroDisc part number A1-321.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan these rotors replace Audi carbon-ceramic brake discs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The A2-321 is listed as a direct replacement for factory iron rear brake rotors only. Compatibility with factory carbon-ceramic braking systems should not be assumed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size are the GiroDisc A2-321 rear brake rotors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese rotors measure 350mm in outside diameter and 28mm in nominal thickness, with a minimum allowable thickness of 26mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does each GiroDisc A2-321 rear rotor weigh?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach complete rear rotor assembly weighs approximately 18.4 pounds according to GiroDisc's published specifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre GiroDisc A2-321 rear rotors fully floating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The A2-321 features fully floating two-piece construction with high-strength steel drive pins, spring clips, and spring washers to accommodate thermal expansion while helping minimize unwanted hardware noise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many cooling vanes do GiroDisc A2-321 rotors have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach rotor features 48 internal curved cooling vanes designed to draw air through the assembly to help dissipate braking heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rotor rings be replaced without purchasing new aluminum hats?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. GiroDisc's two-piece construction allows worn friction rings to be replaced separately from the aluminum hats, provided the hats remain in suitable condition.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich replacement rings fit GiroDisc A2-321?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe compatible replacement ring part number is \u003cstrong\u003eGiroDisc D2-321\u003c\/strong\u003e. Confirm the replacement ring application and required hardware before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should the GiroDisc A2-321 friction rings be replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGiroDisc recommends replacement when the friction rings reach the minimum thickness of 26mm or when a crack extends to the edge of the ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these rear rotors suitable for performance driving?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Their high-carbon iron construction, advanced curved cooling vanes, and fully floating mounting design are intended for demanding performance driving conditions. Proper brake pad selection, brake fluid, and regular brake inspections remain essential.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere are GiroDisc brake rotors manufactured?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGiroDisc manufactures its major rotor components, including aluminum hats, friction rings, and drive pins, in-house at its facility in Bellingham, Washington, USA.\u003c\/p\u003e\n\u003ch2\u003eUpgrade Your Audi S6, S7 or S8 with GiroDisc Rear Brake Rotors\u003c\/h2\u003e\n\u003cp\u003eWhether you're upgrading your Audi C8 S6, improving the rear braking performance of your C8 S7, or maintaining your D5 S8, \u003cstrong\u003eGiroDisc A2-321 Two-Piece Floating Rear Brake Rotors\u003c\/strong\u003e provide advanced high-carbon iron construction, lightweight aluminum mounting hats, and fully floating performance engineering.\u003c\/p\u003e\n\u003cp\u003eFeaturing 350mm friction rings, 48 curved cooling vanes, and reusable aluminum hats, these GiroDisc rear brake rotors deliver a premium braking solution designed for Audi performance enthusiasts.\u003c\/p\u003e","brand":"GiroDisc Racing Brakes \u0026 Technologies","offers":[{"title":"Default Title","offer_id":51181936476379,"sku":"A2-321","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9242\/8763\/files\/Girodisc-Iron-rotors-with-new-curved-grooves-slots.jpg?v=1795192521","url":"https:\/\/competitionmotorsport.com\/products\/a2-321-girodisc-rear-brake-rotors-for-audi-c8-s6-s7-c8-2019-2025","provider":"Competition Motorsport","version":"1.0","type":"link"}