Chillout Systems Quantum Cooling Package
Chillout Systems Chillout Systems Quantum Cooling Package $0.00
Chillout Systems Complete Quantum Cooling Kit This CMS-exclusive kit contains everything required for a complete installation of the amazing Chillout Systems Quantum driver cooling system. Optional equipment is also available. KIT INCLUDES: Chillout Systems Quantum Cooler Power Cable Mounting Tray (choose steel or carbon fiber) Chilllout Club Series cooling shirt Chillout Systems Coolant Formula - 1.5 Liter Chillout Systems 6-Foot Insulated Coolant Hose 40-Amp Inline Fuse (install within 6 inches of power source) OPTIONAL UPGRADES: Quantum Pro Cooler (see details below)  10-Foot Insulated Coolant Hose Insulated Y-Hose for driver/co-driver cooling Upgrade to Pro Touring SFI shirt Air Duct Plenum (increases air flow & cooling capacity): Use in conjunction w/ NACA duct and hose MUST SELECT ONE: Dual Prong Connector or Rapid Release Connector (Rapid Release includes roll bar and flush mounts, easy push-on connection, emergency pull release) Wired remote control Second Vehicle Kit (includes mounting tray, wiring harness, fuse and relay) What makes the Chillout Systems Quantum Cooler superior to other driver cooling systems? Complete control coolant temperature, not just the flow of cold liquid. Bright, easy-to-read digital display on the cooler or control via a mountable remote control unit. Requires 25% less space to mount, fits nearly any vehicle! Say goodbye to the hassle and weight of ice and water; Chillout System weighs far less than any competing system. A 1.5 liter coolant pack lasts most drivers an entire season! With our Second Vehicle Kit, your cooler can be hot-swapped to another car in under two minutes  Quantum Pro vs Quantum V3: The Quantum Pro offers several additional features versus the Quantum V3, including: Full color LCD display with extensive data. Internal bypass valve that eliminates the need for a coolant loop. System continues to cool the reservoir even when the shirt is disconnected. Dual 4-inch 220 cfm brushless fans. 50% larger condenser vs V3. 25% larger evaporator vs V3. LiPo / Li-ion battery support outlet at 24 volts. Supports parallel power at 12 and 24 volts simultaneously, no downtime between power sources. Coolant reservoir has double the capacity at 13 oz.  Eco mode maintains system under 18 Amps at all times. Carbon Fiber mounting plate, further reducing weight and heat-soak.  Two flow sensors monitor both sides of the flow valves for easy troubleshooting and maintenance. IP65 rating.
Coolshirt Complete Club System All-In-One Kit
Coolshirt Coolshirt Complete Club System All-In-One Kit $0.00
Coolshirt Complete Club System Kit PACKAGE PRICE STARTS AT $456 WITHOUT COOLING SHIRT OR FC SWITCH Competition Motorsport assembled this kit putting everything you need to reduce fatigue, reaction time, and dehydration all in one place! Anyone who uses a Coolshirt system will tell you, once you race with one you'll never race without it. Our Complete Club System Kit makes it easy to assemble everything you need, and you save $25 versus buying the pieces separately! 1 Coolshirt coolers have been seriously upgraded in recent years, with new encapsulated pumps rated for an incredible 25,000 hours of continuous operation. Each Coolshirt Complete Club System Kit starts with your choice of a 13- or 19-quart Coolshirt Club System cooler, a mounting tray and tie-down straps, and your choice of a 4-ft, 8-ft, or 12-ft insulated water hose (hoses can be cut to length for your installation). You can add a CoolWater Shirt and an FC-1 Temperature Controller to create a complete driver cooling package! The Coolshirt Complete Club System is the preferred choice for racers at all levels of the motorsport. Whether you race with NASA, PCA, SCCA, IMCA, Chump Car, LeMons, WRL or any other organization, this system's ease of use and unparalleled quality will keep you performing at your peak. Add the optional FC-1 Temperature Controller for total control over your comfort in the race car. The FC-1 Temperature Controller allows you to optimize the flow of water whether you're sitting in the paddock or grid or racing in high-heat conditions. The optional Coolshirt CoolWater shirt contains about 50 feet of medical-grade capillary tubing securely stitched on the front and back of the shirt, covering up to 40% of the body. It connects to the cooler via insulated hose with dry quick-disconnects. You can upgrade to the Coolshirt Evolution cooling shirt, with double the tubing of the standard CoolWater shirt. This provides even more efficient heat transfer, keeping your core temperature stable for longer. Or combine cooling with fire protection by adding Coolshirt's newest SFI 3.3 Rated Evolution FR shirt with the same double-tubing sewn into a long-sleeve SFI 3.3 flame-resistant shirt. COMPLETE SYSTEM KIT INCLUDES Coolshirt Club System cooler (13- or 19-quart) Mounting tray Maintenance additive Water supply/return hose (4-, 8- or 12-foot) with dry quick-disconnects OPTIONS INCLUDE Coolshirt CoolWater short-sleeve shirt Coolshirt Evolution cooling short-sleeve shirt Coolshirt SFI 3.3 Evolution FR long-sleeve shirt FC-1 temperature controller COOLER DIMENSIONS 13-quart: 3 lbs, 14" x 11" x 9.5" 19-quart: 4 lbs, 15.5" x 13" x 10.5"
Coolshirt Pro Air & Water System
Coolshirt Coolshirt Pro Air & Water System from $1,468.00
Coolshirt Pro Air & Water System The Coolshirt Pro Air & Water System can be used with any Coolshirt cooling garment. It effectively sends temperature-controlled cooling water through the garment along with blower-enhanced, cooled, HEPA-4 filtered air to your helmet. The Coolshirt Pro Air & Water System can be used with Coolshirt products like the CoolWater shirt, 2Cool Water FR SFI 3.3 shirt, or the new Coolshirt Evolution FR shirt. The Coolshirt Pro Air & Water System provides 300 Watts (1,023 BTU) of continuous cooling per hour. Its 235 CFM blower and 13- or 19-quart cooler unit with internal pump deliver temperature-controlled cool water to your Coolshirt and chilled air to your helmet. You can independently regulate the temperature and flow of air and water with the included FC-2 Dual Temperature Control Switch, fine-tuning the temperature to your ideal comfort level. Twelve feet of double-insulated water hose, complete with dry quick-disconnects and an automatic shutoff, attach the shirt to the unit. Emergency pull releases are standard on all water hose connections, so if you have to exit the vehicle in a hurry your Coolshirt will automatically unplug from your cooler. SYSTEM DIMENSIONS 13-quart: 6 lbs, 14" x 11" x 9.5" 19-quart: 7 lbs, 15.5" x 13" x 10.5" Coolshirt garment sold separately.
Coolshirt Six-Person Complete Pit Crew Cooling Station
Coolshirt Coolshirt Six-Person Complete Pit Crew Cooling Station $4,485.00
Coolshirt Six-Person Complete Pit Crew Cooling Station A COOL PIT CREW IS A SAFE, EFFICIENT ONE! The Coolshirt Pit Crew Cooling Station is a system is built around a 62-quart heavy duty igloo-style cooler to ensure that you and your crew stay cooler for longer. The cooler features a water port panel allowing up to six connections, with a dual-pump system for enhanced efficiency to make sure everyone gets cool water flow. Each connection uses Coolshirt's dry-break safety pull release system, so the water lines will pull loose with as little as 21 pounds of force. This is a great safety feature in the event that someone forgets to disconnect from the system in the bustle of a busy pit or garage. The system also includes six premium fire retardant, moisture-wicking short sleeve cooling shirts (sizes Small to 3XL) and 12 safety pull hoses (12 feet each). The Coolshirt Pit Crew Station is rugged enough to operate reliably even in the harsh environment of pit road! SPECIFICATIONS Weight: 50 lbs. (22.7 kg)Dimensions: 32" × 23.5" × 19.5"Continuous Cooling Capacity: 300 Watts (1023 BTU) per hour
Chillout Systems Quantum Cooler Pro
Chillout Systems Chillout Systems Quantum Cooler Pro $3,999.00
Chillout Systems Quantum Cooler Pro The Chillout Systems Quantum Cooler series of coolers are the most powerful portable iceless cooling systems ever designed for auto-racing. Requiring no ice, this driver cooling system is completely maintenance-free, running solely off the strength of a rotary micro-compressor that is as powerful as other compressors 5x its size.  Rated at 20 liters per minute/16 psi, the Quantum Pro system is capable of chilling to under 35º F. Max amp draw is rated at 18-22 amps, depending on installation and environmental conditions. System contains less than 1.75 oz. of freon sealed within the rotary micro-compressor system. The Quantum Pro offers many different temperature settings that support varying performance conditions. Dual 220-cfm fans help decrease amp draw, and a bright, easy-to-read color digital display offers valuable information and data.  Weighing in at 10.5 lbs, the Quantum Pro is portable and hot-swappable so you can quickly move it from mounting location to mounting location within seconds. A dash-mountable digital control display is available for cooler installations out of the driver's reach.  When planning installation, please consider the interior temperature of your vehicle under racing conditions. Keep in mind that ducting is necessary for many installations to achieve the best results. Using four-inch ducting is highly recommended and eliminates the need for a supplemental blower. Three-inch ducting is restrictive and requires the use of a high performance (250+ cfm) blower. Quantum Pro vs Quantum V3: Full-color LCD display with extensive data Internal bypass valve eliminates the need for a coolant loop. System continues to cool the reservoir even when the shirt is disconnected. Dual 4-inch, 220 cfm brushless fans  50% larger condenser vs V3 25% larger evaporator vs V3 LiPo / Li-ion battery support outlet at 24 volts. Supports parallel power at 12 and 24 volts simultaneously, no downtime between power sources. Coolant reservoir has double the capacity at 13 oz.  Eco mode maintains system under 18 amps at all times. Carbon fiber mounting plate further reduces weight and heat-soak.  Two flow sensors for monitoring both sides of the flow valves for easy troubleshooting and maintenance. IP65 rated. In the Box: Quantum Cooler Pro Carbon Fiber Mounting Plate Wiring Harness Locking Ball Pins Priming Tube Cross Compatibility: The Chillout Systems Quantum Cooler Pro is compatible with other brands of cooling shirts that use 1/4" tubing. You will need to purchase the Chillout Systems Dual Prong Adapter and Insulated Hose in order to connect to non-Chillout shirts.
Chillout Systems Quantum v3 Cooler
Chillout Systems Chillout Systems Quantum v3 Cooler $2,899.00
Chillout Systems Quantum Cooler Finally! No more dragging around bags of ice and gallons of water for your driver cooling! The Chillout Systems Quantum Cooler is the most powerful, portable iceless cooling system ever designed for auto racing. Requiring no ice or water, this driver cooling system is completely maintenance-free, running solely off a rotary micro-compressor that is as powerful as other compressors five times its size! Pumping Chillout's proprietary coolant formula at a rate of 20 liters per minute at 16 psi through specially-designed cooling apparel, this system is electronically limited to cool to 40º F (5º C) despite being capable of cooling much lower than that. The Chillout Systems Quantum Cooler is simple to use while offering more customizable features than ever before, including five temperature settings that accommodate varying race-day conditions and a bright, easy-to-read digital display. Weighing less than 11 pounds, the Chillout Systems Quantum Cooler is portable and hot-swappable, so you can quickly move it from one mounting location to another within seconds. A dash-mountable digital control/display is available for installations where the system is beyond the driver's reach. IN THE BOX Quantum Cooler Mounting Tray Wiring Harness Locking Ball Pins CROSS COMPATIBILITY The Chillout Systems Quantum Cooler is compatible with other brands of cooling shirts that use 1/4" tubing. You will need to purchase the Chillout Systems Dual Prong Adapter and Insulated Hose in order to connect to non-Chillout shirts. Ducting plenum (shown) sold separately.
Coolshirt Drag Pack Complete Drag Racing System
Coolshirt Coolshirt Drag Pack Complete Drag Racing System $1,025.00
Coolshirt Drag Pack Cooling System The Coolshirt Drag Pack complete system helps drag racers go straight as fast as possible! Designed specifically for drag racers, this complete kit comes with the Drag Pack ice-based cooler system, a Driver Cooling Vest, an eight-foot insulated hose, and a seven hour lithium-ion battery with charger. The Driver Cooling Vest helps stabilize body temperature and is deal for drivers with limited space or short-duration races. Many drag racers use this system to stay comfortable during staging, and then disconnect quickly at start time. Others leave them running the whole time. Either way, the improvement in driver comfort and focus is night and day! Research shows that driver reaction times alone can increase by as much as 20% with only a 2% loss in hydration. The Drag Pack system covers 30-40% of the body with cold water circulating through tubing designed to dissipate heat away from the body, cooling your core and dramatically lowering dehydration. In terms of body temperature, cooler is faster! The Drag Pack system comes with emergency pull release standard, facilitating quick driver extraction in an emergency. SYSTEM INCLUDES MobileCool 1 (6qt) or MobileCool 2 (12qt) cooler Driver Cooling Vest (size S to XXL) Eight-foot insulated water hose with emergency-pull releases Lithium-ion battery with seven-hour charger Two Endurance Ice packs
Coolshirt Dry-Cool Air Cooler (Add-On)
Coolshirt Coolshirt Dry-Cool Air Cooler (Add-On) $746.00
Coolshirt Dry-Cool Air Cooler The Coolshirt Dry-Cool Air System is an add-on component that can be installed in series to any water-cooled system (such as the Club System, MobileCool bags, Drag Pack, etc.) to provide cool air to the driver's helmet. Using an independent fan system to draw outside air through an aluminum heat-exchanger, the 235 CFM fan provides hours of cool air when needed. Add an optional FC-2 Dual-Temperature Controller to control both fan speed and cooling system water pump speed. This lets you tailor cooling to the environment, whether you're waiting on the grid or racing full-tilt on a hot day!
Coolshirt HotHead System
Coolshirt Coolshirt HotHead System from $536.00
Coolshirt HotHead System The HotHead System is designed with the budget-conscious racer in mind. The HotHead provides head cooling for those who want a small, lightweight system and don't need body cooling. The kit includes a Coolshirt Kart Bag powered by 12V hookup (or choose the optional 7.2V lithium-ion rechargeable battery kit), a four-foot water supply hose with safety-pull release fittings, and a Coolshirt Cool-A-Clava under-helmet cooling garment. It's perfect for open wheel racing, legend cars, HPDE participants, and sports car racers who want cooling but don't want to add much weight or amp draw to their vehicle. SPECIFICATIONS Bag dimensions: 4” x 7” x 7.5” Race-ready weight: 6.5 lbs (3.0 kg) Amp draw: < 3A INCLUDED IN THE SYSTEM Coolshirt Kart Bag with 12V hard-wire standard (lithium-ion battery optional) Four-foot water hose Coolshirt Cool-A-Clava Endurance Ice cooling packs
Coolshirt Club Bag Portable Cooler
Coolshirt Coolshirt Club Bag Portable Cooler from $425.00
Coolshirt Club Bag Portable Cooling System The Coolshirt Club Bag is designed for the weight-conscious racer who wants a cooling solution without having to permanently mount a hard cooler system in the car. It's designed to utilize two Endurance Ice packets to provide a great, easy cooling solution without the hassle of permanently mounting the system. The Club Bag can be can be wired into the car's 12V system or powered by an optional rechargeable 7.4V lithium-ion battery kit. This system is perfect for the club racer who needs to keep cool during sprint races or for the track-day enthusiast who can't mount a hard cooler. Weighing only two pounds and measuring 8" x 7" x 10", it fits in tight spaces that a regular cooling system won't!
Coolshirt MobileCool Portable Bag Cooler
Coolshirt Coolshirt MobileCool Portable Bag Cooler from $342.00
Coolshirt MobileCool Portable Bag Cooler Developed for use in all types of racing, the Coolshirt MobileCool Portable Bag Cooler provides a driver with a full cooling alternative for race cars that have limited space or no place to mount a standard hard cooler. The MobileCool is especially convenient for road racers and track-day enthusiasts with more than one car; it's easily moved from car to car as needed. Drag racers are also discovering its versatility (the MobileCool is the basis of the Coolshirt Drag Pack System), and it has also become very popular with driving-school instructors as it can be powered by a cigarette lighter adapter and easily moved.  The cooler comes in two capacities, 6-quart and 12-quart, and can be powered by the car's 12V system or the optional rechargeable 7.4V lithium battery for true portability.  It provides the same superior cooling as Coolshirt's legendary fixed-cooler systems. It keeps drivers cool and mentally alert right through their final laps, when heat fatigue and dehydration are at their worst.
Coolshirt Club Cooler (Cooler and Pump Only)
Coolshirt Coolshirt Club Cooler (Cooler and Pump Only) from $310.00
Coolshirt Club Cooler The compact Coolshirt Club Cooler is designed for those racing applications that have space for a fixed-mounted cooler for longer races. Perfect for road racing, circle track, drags and many other racing types, it's a favorite among NASA, SCCA, and PCA drivers! The Club Cooler keeps you cool and alert so you feel your best in the waning laps of a race, when heat is a big factor in fatigue and loss of focus. Plus, you can stay cool waiting in the pits or on the grid. The Coolshirt Club Cooler comes as a 13- or 19-quart cooling unit with an internal water pump that supplies cooled water to your Coolshirt garment (sold separately) through double-insulated hose (also sold separately) with automatic shutoff quick-disconnects. Add an optional FC-1 Temperature Controller for complete control over your cooling comfort in the race car. COOLER DIMENSIONS 13-quart: 3 lbs, 14" x 11" x 9.5" 19-quart: 4 lbs, 15.5" x 13" x 10.5"
Coolshirt Air Blower System
Coolshirt Coolshirt Air Blower System $253.00
Coolshirt Air Blower System The Coolshirt Air Blower system is the most economical way to get fresh, filtered air to the driver for relief from that hot helmet. It's designed to attach to the driver's helmet intake and comes complete with a 235 CFM blower motor, a clear air hose, and a HEPA-4 air filter to ensure the driver's air is clean and virtually particle-free, down to 4 microns. Breathe fresh, clean air using a Coolshirt Air Blower system! The system includes three feet of 3" diameter inlet hose (to the blower), four feet of 1-1/2" diameter outlet hose (from the blower to the helmet), a 12V 235 CFM blower, and a HEPA-4 air filter. Requires a ported helmet (sold separately). The blower measures 5 3/4" long overall and draws 4.3 amps.   
Coolshirt Kart Bag Portable Cooler
Coolshirt Coolshirt Kart Bag Portable Cooler from $338.00
Coolshirt Kart Bag Compact Portable Cooling System Powered by a 12V connection or an optional rechargeable 7.4V lithium-ion battery kit, the Coolshirt Kart Bag is a self-contained, portable cooling system for the racer who has limited room with which to work. The Kart Bag is designed to use one Endurance Ice cold pack and plug directly into any Coolshirt liquid-cooled garment. It's perfect for karting, formula racing, HPDE track-day cars, or anywhere else a small, compact cooling solution is needed due to space limitations. Don't be fooled, even though the Kart Bag weighs only 1.6 pounds, it will keep you plenty cool for up to one hour. Perfect for sprint races, track days and karting! DIMENSIONS 4.0 x 7.0 x 7.5 in. 1.6 lbs (0.7 kg)
Coolshirt Cool-A-Clava
Coolshirt Coolshirt Cool-A-Clava $115.00
Coolshirt Cool-A-Clava The Coolshirt Cool-A-Clava literally helps you keep a cool head under pressure! This helmet insert is superior to any current air- or water-based head cooling unit on the market. The Coolshirt Cool-A-Clava plugs in to any current Coolshirt cooler or bag system. The Cool-A-Clava requires no special hardware and can be used with nearly every helmet available! Last but not least, the Coolshirt Cool-A-Clava eliminates the need to install a separate helmet blower system. That's less drain on your electrical system, fewer hoses, less weight and lower chance of an equipment failure. This is, without a doubt, a must-have to stay cool and focused while on track.