Racing Seats Racing Seats

Sparco ADV XT Carbon Racing Seat The Sparco ADV XT is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating, FIA 8862-2009. This means the ADV XT has been tested to an impact of approximately 70G. This rating is required for GT racing, and the ADV XT was specially designed with a more relaxed, comfortable driving position for GT cockpits. With strength at the top of its class, the ADV XT can withstand over 6,600 lbs. of lateral force. The ADV XT has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric, plus a special non-slip fabric in the shoulders and seat area. The ADV XT is FIA approved when mounted with the Sparco #0049605 side-mount brackets. TECHNOLOGY: Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for GT cockpits and driver position HANS device compatible Fire retardant fabric Special non-slip fabric DIMENSIONS:

Sparco Racing Seats ADV Elite Carbon The Sparco ADV Elite is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the ADV Elite has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the ADV Elite was specially designed with an upright driving position preferred by Rally drivers. In addition to the Rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the ADV Elite can withstand over 6,600 lbs. of lateral force. The ADV Elite has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. The ADV Elite is FIA approved when mounted with the Sparco #004988ADV side-mount brackets. TECHNOLOGY Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire retardant fabric Special non-slip fabric DIMENSIONS

Racetech RT9119 Lightweight Racing Seat Building upon the successful 129 series, the Racetech RT9119 racing seat offers the same ergonomic form and incredible features in a lighter and more protective package. Used by many professional teams at both the national and international levels, this is the lightweight version using a precise combination of carbon and Kevlar hybrid weave to achieve a shell weights as low as 9.9 lbs. (4.5kg). Four sizes are available: Standard, Wide, Tall, and Wide & Tall. You can further customize your seat with low-profile base cushions, or by adding side cushions for support in the thigh area. Racetech 119-Series seats (except the WHR) are compliant with FIA 8855-1999 standards1. BRACKETS AND MOUNTING OPTIONS: Side mount to the floor using the Racetech RTB1009M 5mm aluminum brackets (available in the drop-down above). Back mount using the RTB2115B bracket in conjunction with the RTB2005C clamps. The RTB2115B is a 5mm aluminum bracket that bolts directly to the shoulder beam of the seat. The RTB2005C clamps bolt to the RTB2115B and come in three variants: 11/2 inch (38mm), 15/8 inch (41mm), or 13/4 inch (45mm) ID to suit your roll cage tubing diameter. Note 1: In order to comply with FIA 8855-1999, Racetech 119-Series seats must be back-mounted to the roll cage at shoulder level. Back-mounting improves seat strength and stability during an impact, increases driver feel, and reduces driver fatigue. FEATURES: Gel-coat cear self-finish. Seat cover in black fire-retardant fabric. Wear patches black perforated leather. FIA homologation FIA 8855-1999 approved (except RT9119WHR). Shell constructed of Kevlar/carbon. Shell weight from 9.9l bs. (4.5 kg). Integrated air ducting is vented to the driver's lower back. Back-mount compatible. SIZES: Standard (HRW) Wide (WHR) Tall (THR) Wide & Tall (WTHR)     

Sabelt X-Pad Carbon Racing Seat The Sabelt X-Pad Carbon is exceptionally light weight, the perfect seat for those racing smaller cars with limited interior space who still demand the safety of a full-containment seat. Sabelt has managed to by making the shell smaller and lighter while maintaining interior seat dimensions that fit most average racing drivers. The X-Pad Carbon is Sabelt’s most compact seat yet, specifically designed to fit in smaller cockpits and offering the safety and weight savings of a high-strength carbon fiber shell. They achieved this by replacing bulky racing seat padding with significantly thinner, but still very comfortable foam padding. You'll never miss the added bulk! The exterior dimensions of the seat were reduced by changing key elements -- like eliminating the "rolled" upper edges of the seat -- which combine to reduce the width significantly without narrowing the seat to the point where it would only fit small drivers. The Sabelt X-Pad Carbon is a premium example of how game-changing innovation can be discovered in plain-sight; it doesn't always require a shake-up to standard conventions. FEATURES: FIA 8855-1999 homologation. Weight: 13.7 lbs (6.2 kg). Super-light carbon fiber shell construction. Standard side mounting. Perfect full-containment seat for small cockpit cars. Shoulders and hips designed for Regulation 8862 to improve driver safety.

Sabelt Titan Carbon Racing Seat The Sabelt Titan Racing Seat has been known for being simple and elegant. With the new Titan Carbon Racing Seat, Sabelt maintains that tradition while introducing an ultra-lightweight, autoclave carbon fiber shell and a more rounded design aimed at reducing weight by over 25%. The Sabelt Titan Carbon was developed in partnership with the best companies racing in GT Championships around the world. The Titan Carbon is both very light weight, extremely safe, and incredibly comfortable. Offered in two sizes (Standard and Max) to accommodate a wide range of drivers, the Titan Carbon is beautifully upholstered including 3D mesh panels that offer excellent breathability to help reduce driver fatigue. The result is an amazingly light, safe, comfortable racing seat. CMS Exclusive: for a limited time, add Sabelt lightweight aluminum side mounts and hardware kit (in the dropdowns above) at no additional cost. FEATURES: FIA 8855-1999 homologation Weight: Standard 15.6 lbs (7.1 kg); Max 15.2 lbs (6.9 kg) Deep side bolstering to prevent lateral movement Six-point harness ready (sub-belt hole in the bottom of the shell) High-wear velour fabric upholsters the main shell Breathable mesh 3D fabric on backrest and bottom Kinderpoint anti-slip fabric on shoulder bolsters

Racetech RT4119HRW Racing Seat Building upon the successful 129-Series, the Racetech RT4119 offers the same ergonomic form and incredible features in a lighter and more affordable package. The RT4119 is used by many professional teams at both the national and international levels. There are four sizes available: Standard, Wide, Tall, and Wide & Tall. Customize your seat further by adding low-profile base cushions, or you can add side cushions for support in the thigh area. The 119-Series seats are compliant with FIA 8855-1999 standards1. BRACKET AND MOUNTING OPTIONS: Side mount to the floor using Racetech RTB1009M 5mm aluminium brackets. Back mount using the RTB2115B bracket in conjunction with RTB2005C clamps. The RTB2115B is a 5mm aluminium bracket that bolts directly to the shoulder beam of the seat. The RTB2005C clamps bolt to the RTB2115B and come in three variants: 11/2 inch (38mm), 15/8 inch (41mm), or 13/4 inch (45mm) ID to suit the roll cage tubing diameter in your vehicle. Note 1: In order to comply with FIA 8855-1999, Racetech 119-Series seats (except the RT4119HRW) must be back-mounted to the roll cage at shoulder level. Back-mounting improves seat strength and stability during an impact, increases driver feel, and reduces driver fatigue. FEATURES: FIA homologation complies with FIA 8855-1999 regulations. Shell construction of composite (GRP) Shell weight from 16.8 lbs. (7.6 kg). Large harness guides. Air ducting vented to the driver's lower back. Back-mount compatible. SIZING: Standard (HRW) Wide (WHR) Tall (THR) Wide & Tall (WTHR)

OMP WRC-R Carbon Racing Seat The OMP WRC-R Carbon Racing Seat offers professional-level features in a an ultra-light, carbon fiber design with aggressive side and thigh bolsters. Upholstered in OMP's highly breathable Airtex material to keep you cool and improve performance even in the hottest conditions. The WRC-R Carbon features removable back/base cushions and a comfortable split-leg bottom cushion. High side-bolsters offer excellent lateral leg support, while the HANS-compatible shoulder harness slots accomodate various driver heights. Seat gel-coated fiberglass shell. Large . High side bolsters for lateral leg support for higher protection. Removable back, base and leg cushion for maximum individual seating comfort. FEATURES: FIA homologated to 8855-1999 standard Made from ultra lightweight carbon fiber Removable cushions in the back, base and split leg High side bolsters for great lateral leg support Large harness slots 12.3 lbs (5.6 kg)

Sabelt GT-Spine Racing Seat The industry's very first racing seat to earn the coveted FIA 8855-2021 homologation, the GT-Spine is good for 10 years from the date of manufacture! This innovative gel-coated fiberglass competition racing seat by Sabelt boasts an aggressive design, DCT head protection, fireproof fabric, and high density foam. The GT-Spine seat also provides excellent lateral support and is more than a worthy choice for safety and comfort where it matters most. FEATURES: FIA 8855-2021: Must use F12 Brackets (see pulldown menu) Large weighs 35.5 lbs High side bolstering prevents lateral movement and keeps the driver positioned like never before Six-point harness ready with sub-belt hole in the bottom of the shell High wear resistance velour fabric Heavy-duty M12 mounting bolts (included)

Sparco QRT-C Performance Carbon Racing Seat The QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. SIZING Large – up to a 36” waist (pants size) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY Ultralight Carbon Fober Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved QRT-C PERFORMANCE CARBON DIMENSIONS

Racetech RT4119W Racing Seat Racetech took their most popular seat and gave it a chop! The RT4119W (Wide) and RT4119WT (Wide & Tall) seats are based on the existing RT4119WHR and RT4119WTHR, but with the head restraints removed for improved visibility and access in track day type vehicles. This seat retains Racetech's unique, patented back mount design to give the driver ultimate support and feel for the chassis not available in basic floor-mounted seats. Customize your seat further with low base cushions or add side cushions for support in the thigh area. These 119 seats without head restraints are not FIA homologated. These seats do not include an air ducting spigot, but when it gets hot in your Porsche or Pro Touring Camaro, you're just going to turn on your air-conditioning, right? Ideal for HPDE/DE track cars, off-road desert trucks & outlaw drag cars when drivers can't use a head restraint seat. Brackets and Mounting: Side mount to the floor using Racetech RTB1009M 5mm aluminium brackets (please tick the box above when ordering). Back mount using RTB2115B in conjunction with RTB2005C. The RTB2115B is a 5mm aluminum bracket that bolts directly to the shoulder beam of the seat. The RTB2005C clamps bolt to the RTB2115B (once holes have been drilled) and come in three variants: 1-1/2" (38mm), 1-5/8" (41mm) or 1-3/4" (45mm) ID to suit the rollcage tube diameter in your vehicle. Please select your preferred clamp diameter above when ordering. TECHNICAL INFO: FIA Homologation: N/A Gel-coated in gloss black Seat covered in black fire-retardant fabric Wear patches of black perforated leather Shell construction in composite (GRP) Shell weight from 7.0kg (15.5 lbs) Sizes W (Wide) or WT (Wide & Tall) Air Ducting: N/A Back-mount compatible     

Racetech RT4100HR Racing Seat Announcing the all new Racetech 4100 Series! The RT4100HR is a standard-sized fiberglass race seat equipped with head restraint wings for enhanced safety. Racetech focused on achieving a lightweight seat shell with optimized geometry, straddling the line between a seat wide enough in the shoulders to suit an athletic build, but narrow enough to fit in most cockpits. Racetech's patented back-mount technology has migrated down from the 119- and 129-Series, giving you the option of fixing the seat to your roll cage at shoulder level. Large harness guides and a removable molded base cushion allow a range of drivers of varying heights to fit comfortably. Breathable Spacer fabric, parallel sides, and pronounced thigh support round out the features of this accomplished motorsport seat. For the larger driver, the RT4100WTHR is 60mm taller and 40mm wider than the Standard size. For those wanting a seat without head restraints, check out the Racetech RT4100 and RT4100WT. All 4100-Series seats use Racetech RTB1009M alloy side mounting brackets. FEATURES: Gel-coat in gloss black. Seat cover is black fire-retardant nylon fabric with Spacer mesh through the torso. FIA homologation 8855-1999. Shell construction in fiberglass composite. Shell weight from 17.85 lbs. (6.1 kg). Back-mount compatible. SIZES: Standard (HR) Wide & Tall (WTHR)     

Sparco QRT-K Carbon Kevlar Racing Seat The QRT-K is a full Carbon Kevlar version of the QRT-R. The QRT-K looks amazing with the exposed yellow/black Carbon Kevlar weave. The QRT-K is one of the lightest seats on the market. The QRT-K weighs 13.5lbs fully trimmed (with padding, cover and harness guides) and is constructed from “Pre-Preg” aerospace grade Carbon Kevlar. The QRT-K was specifically designed for a larger driver and it can fit a 36” waist (pants size) driver. The QRT-K is unique because it was designed to fit a larger driver but has excellent fitment into smaller cockpits. The QRT-K requires the special QRT Side mounts (#600QRT) which allows the seat to be raked back for a comfortable ergonomic seating position. The QRT-K is FIA approved. SIZING Large fits up to a 36” waist (pants size) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY Ultralight Carbon Kevlar Composite Shell - 13.5lbs including cover and padding Visible carbon kevlar weave Excellent fitment into small cockpits Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved QRT-K CARBON KEVLAR DIMENSIONS

Sparco QRT-C Carbon Racing Seat The QRT-C is an all-carbon fiber version of the QRT-R. The QRT-C is the lightest “large” size carbon fiber seat on the market. The QRT-C weighs 12.5lbs (with padding and cover) and is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The QRT-C was specifically designed for a large driver and it fits up to a 36” waist driver comfortably. The QRT-C is unique because it was designed to fit a larger driver but has excellent fitment into smaller cockpits The QRT-C requires the special QRT Side Mounts (#600QRT) which allows the seat to be racked back for a comfortable seating position. The QRT-C is FIA approved. SIZING Large – up to a 36” waist (pants size) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY Ultralight Carbon Fiber  - 12.5lbs fully trimmed weight Excellent fitment into small cockpits Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved QRT-C CARBON DIMENSIONS

Sparco QRT Performance Racing Seat The Sparco QRT-R was the first seat to feature Sparco’s patented QRT technology. The QRT Performance seat represents the luxury evolution of the QRT-R race seat. The QRT Performance uses the same FIA race shell as the QRT-R race seat but is covered in Italian Leather and Alcantara. The seats are handstitched in the Sparco OEM factory in Torino Italy. The QRT Performance has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. QRT TECHNOLOGY Sparco QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach the weight of carbon fiber seat at the price of a fiberglass composite seat. REQUIRES QRT SIDE MOUNT #600QRT FOR PROPER MOUNTING FEATURES OEM Italian leather and Alcantara QRT technology gives up to 30% weight savings Ultra-light fiberglass composite shell Lower seating position that can fit taller/larger drivers Smaller outer dimensions for improved vehicle fitment Available in Black or Red FIA approved

Racetech RT4100 Racing Seat Announcing the all-new Racetech 4100 Series! The RT4100 is a standard-sized fiberglass race seat. Racetech focused on achieving a lightweight seat shell with optimized geometry, straddling the line between designing the seat to be wide enough in the shoulders to suit the athletic build, but narrow enough to fit in most cockpits. Their patented back-mounted technology has trickled down from the 119 and 129 Series, giving you the option of fixing the seat to the rollcage at shoulder level. Large harness guides and a removable molded base cushion allow a range of drivers of varying heights to fit. Breathable Spacer fabric, parallel sides and pronounced thigh support round off the features of this accomplished motorsport seat. OPTIONS: The RT4100WT is 60mm taller and 40mm wider than the standard RT4100. The RT4100HR and RT4100WTHR include head restraints. The 4100 Series seats use Racetech RTB1009M alloy side mounting brackets (can be added separately). TECHNICAL INFO: Gel-coat in gloss black Seat covered is black fire-retardant nylon fabric with Spacer mesh through the torso FIA homologation 8855-1999 Shell constructed of fiberglass composite Shell weight from 5.7kg (12.5 lbs) Sizes Standard or WT (Wide & Tall) Back-mount compatible