Black Friday 2022 10%

Stilo ST5.1 GT Composite The ST5.1 GT Composite is Stilo's Snell SA2020 version of their best-selling kevlar-carbon composite helmet. With an autoclave molded shell, the Stilo ST5.1 GT Composite offers far superior safety compared to fiberglass and most composites from their competitors. You get all this without sacrificing comfort or features, as Stilo continues to focus on minimizing weight and maximizing flexibility. With its large eye port, the Stilo ST5.1 GT Composite offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT retains its FIA 8858-2015 homologation as well. This makes the helmet legal for nearly all road race usage (although some sanctioning bodies require FIA 8860 homologated helmets.). INTEGRATED FLEXIBILITY The Stilo ST5.1 GT Composite is unsurpased in built-in flexibility. Its two side ports can be fitted with 3 different types of integrated communication electronics, forced air, helmet eject system, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the ST5.1 GT is sleek and seamless. When not in use, you don't even know the features are there. Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo offers simply the best modular racing helmet on the market. Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use. Note: We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. FEATURES Noise attenuating earmuffs are included to reduce exterior noise. Seamlessly integrate communications, forced air, hydration and/or eject options into your Stilo ST 5.1 GT helmet. Snell SA2020 certification offers increased protection at higher g-forces and speeds than SA2015. Existing Stilo ST5 visor shields and accessories work on ST5.1 SA2020 helmets. Sizes shown in centimeters OTHER STILO VERSIONS Carbon fiber version: Stilo Helmets ST5.1 GT Carbon Helmet FIA 8860-2018 versions: Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet Stilo Helmets ST5 GT 8860-2018 Carbon Helmet The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Stilo Anti-Fog/Anti-Scratch Visor for the ST5 Helmet Add some color to your racing life! Stilo offers a wide variety of visor options, including many popular iridium colors. All visors have an anti-fog and anti-scratch coating and are made to fit your Stilo ST5 helmet (GT or Naked) perfectly. Anti-fog visors do require special care, only use Stilo Visor Cleaner (Acrysol). Liberally spray the outside of the visor with the cleaner and wipe with a microfiber towel until clean and dry. Repeat if necessary.  To clean the inside of the visor, spray liberally with Stilo Visor Cleaner and wipe in one direction only, wiping only once with a microfiber towel. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor.  Do not use Windex or any glass cleaner containing ammonia as this can harm the anti-scratch coating on the outside of the visor and the anti-fog coating on the inside of the visor.

Sparco Race 2 Racing Shoe Developed exclusively for the U.S. market, the all-new Race 2 driving shoe provides comfort and control. It is an evolution from the popular Race shoe. It features a wide toe box and a Comfort Achilles panel designed to allow ankle movement when operating pedals. An all new sole design improves pedal feel and helps reduce shock and vibration. Stylistically, the Race 2 shoe offers an aggressive design with an all-suede upper and a Velcro closure. Available in black, blue and red in sizes from 7 to 13. The Race 2 is SFI approved. FEATURES SFI approved Comfort Achilles panel which allows ankle movement Wide toe box and an extra cushioned sole for greater comfort New sole design for better pedal feel Suede outer shell and boot cut design with Velcro closure

Bell Racing Helmets M.8 SA2020 Helmet The Bell Racing Helmets M.8 Composite Helmet SA2020 succeeds the Bell M-Series Concept, ideal for racers who want a larger field of vision (perfect for eyeglass wearers) along with the latest Bell performance and styling.  The Bell M.8 Composite has traditional styling while offering a wide range of updated features for all types of racing: open wheel, closed car, karting, and more. The lightweight composite shell, Comfort-Plus FR® interior, manual air intake vents, and bigger eye opening all contribute to superior protection, comfort, and air flow to keep you safe and cool under pressure. AVAILABLE COLORS: Gloss White Matte Black FEATURES: Snell SA2020 homologation. All sizes are in centimeters. SRV-8 3mm SRV clear shield (SRV-1 pivot system). Lightweight composite shell with high-pressure molding system for improved shell strength. High-impact, multi-piece, multi-density custom bead absorbing liner improves low- and high-velocity impact protection. Install integrated radio microphone, drinking tube systems (both sold separately) with integrated channels in the facepiece. Black Comfort-Plus FR® interior fabric for excellent moisture wicking and durable quality. Multi-foam density standard interior for superior fit. Optimum airflow ventilation system with direct-flow chin bar vents, manual level air intake vents. Air, dirt, and water won’t get past the hollow synthetic rubber gasket seal. Larger eyeport than many other models. M6 terminal hardware and hex wrench to install your Head and Neck Restraint Device

Sparco Rush Kart Racing Gloves The Rush karting glove offers protection and comfort at an entry level price. Made from a polymide outer and lined with soft cotton, the Rush features a synthetic suede palm printed with high grip silicon for excellent grip with improved comfort. The Rush is a two-tone glove with signature Sparco logos printed on the back of the hand for instant recognition. The Rush has an elastic cuff with a high grip puller for ease of use. TECHNOLOGY Polymide outer with soft cotton lining Synthetic suede palm High-grip silicon printed palm Elastic cuff for secure fit and control Grippy pull for easy on/off

Stilo Acrysol Visor Cleaner Ground Shipping Only for this Item. Stilo helmet visors have a special anti-fog coating that is harmed by any type of ammonia, acidic, or even vinager based cleaners. The only safe way to clean a Stilo visor is with this very fast drying, ultra-purified solvent based cleaner. Stilo Visor Cleaner Details: Manufacturer: Stilo Manufacturer part number: YA0640 Size: 20 oz Aerosol: Yes Approved by Stilo: Yes Acrysol is commonly used in premium auto body shops. Used primarily for body panel degreasing prior to top color coat application, and is the official Stilo visor cleaner. How do you clean a Stilo Visor? We prefer to remove the shield from the helmet and spray a wet mist amount on the inside first. Then quickly and lightly, use a single wiping action to to go from one side to the other going the long way. We then turn the visor over and repeat using the single swipe method. If debris/mud/etc remain, repeat until perfect. This is the Official certified cleaning agent that will keep your vision perfect in front and the competition behind and not damage your special anti-fog coating.

HANS Helmet Post Anchors (for SA2015 and newer) HANS helmet post anchors to attach your HANS or Stand21 head-and-neck restraint to your Snell SA2015 or SA2020 helmet. (Those helmets have threaded M6 inserts molded into the helmet.) These post anchors are FIA-approved and screw right into those helmet inserts.

Stilo ST5.1 GT Carbon SA2020 Helmet The ST5.1 GT Carbon is Stilo's Snell SA2020-compliant version of their best-selling carbon helmet. With an autoclave molded carbon fiber shell, the Stilo Helmets ST5.1 GT Carbon offers strength superior to fiberglass and composites while minimizing weight. With its large eyeport, the Stilo ST5.1 GT Carbon offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT Carbon retains its FIA 8858-2015 homologation as well. This makes the helmet legal for nearly all road race usage (except for those sanctioning bodies requiring FIA 8860 homologation). INTEGRATED FLEXIBILITY The Stilo Helmets ST5.1 GT Carbon is unsurpassed in built-in flexibility. Its two side ports can be fitted separately with integrated communication electronics, forced air, helmet eject system, or a driver hydration system. Thanks to its innovative shell design, mounting and routing these options into the ST5.1 GT is sleek and seamless. Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo simply offers the best-designed modular racing helmet on the market. Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for your head-and-neck restraint. SIZING NOTE We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. FEATURES: Noise-attenuating earmuffs to reduce exterior noise Integrated side ports for adding communications, forced air, or hydration Snell SA2020 certification All Stilo ST5 shields and accessories work on the newer ST5.1 SA2020 helmets OTHER VERSIONS OF THE STILO ST5.1 HELMET: For the composite version, see the Stilo Helmets ST5.1 GT Composite Helmet. For the FIA 8860-2018 version, see the Stilo Helmets ST5 GT Zero 8860-2018 Carbon Helmet. Measuring Your Head The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

HANS Device Sport 3 Head Restraints HANS Device Sport 3 Head Restraints are the lightest HANS Sport Series device to date. HANS Device Sport 3 Head Restraints present a contemporary approach to building a lightweight, strong, and safe HANS Device. Now in the third generation, HANS Device Sport 3 Head Restraints have a new design and polymer with a hollow collar which reduces the weight significantly. Its engineered reinforcements guarantee a very strong structure with a reduced mass. HANS Device Sport 3 Head Restraints provide the same level of safety as every HANS Device with the lightest, most comfortable injection-molded HANS made to date. HANS Device Sport 3 Head Restraints are developed with ease of driver entry/exit in mind. Its rounded back is lower than the original HANS Device design, reducing the risk of getting caught on a roll cage or in window openings when moving in and out of a racecar. Authentic HANS Devices set the standard in top performance in lab crash testing and real-life race crash results. The HANS Sport 3 is only available in a 20o Layback Angle configuration, suitable for the majority of racing applications including most Stock Cars, Modifieds, Drag, Legends, Bandalero and most road racing cars. However, the HANS Device Sport 3 Head Restraints are not compatible with cars that have extreme layback seats such as formula type cars, IndyCars, etc. FEATURES: CMS carries only dual homologation FIA/SFI HANS devices to make sure you're getting the right certification for any racing organization needs. Includes SAH helmet post anchors (for SA2015 and SA2020 helmets). Only 4 oz. (100 g) heavier than the HANS Pro Device! Improved fit, reduced weight compared to past models. Sliding tethers are standard. Injection molded super-structural carbon composite construction. Lower rounded collar saves weight and allows for easier entry/exit in many smaller, tighter vehicles.

Stilo Helmet Adapter for IMSA Radio Systems Genuine Stilo to IMSA helmet adapter cord to connect the female communication port on your Stilo Helmet to any female IMSA car harness. The short cable has a 4-inch coiled section while the long cable has a 10-inch coiled section. Stilo to IMSA Adapter Cable (4C to 4C) Details: Manufacturer: Stilo Manufacturer part number: AC0212 (short) / AC0224 (long) Helmet end: Stilo 4C Chassis end: IMSA 4C Cord type: Semi-coiled

Bell Racing Helmets SE07 3mm Helmet Shield Bell SE07 helmet shields are specifically designed for the SA2015 Bell RS7 and HP7 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE07 shield uses the SV (SE07) pivot kit, is compatible with tear offs, and is available in a variety of tint colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) AVAILABLE TINT COLORS: Clear Light Smoke Dark Smoke Yellow Silver Mirror Blue Mirror Rainbow Iridium Mirror Multi-Layer Blue Multi-Layer Red

Stilo Communications Kits Discovery Parts does not recommend installing these kits without proper training and tools. Call us at (844) 438-7244 and we'll make arrangements for you to send your helmet to us for professional installation and/or retrofitting. PLEASE NOTE: We will not warranty any Stilo communications kit that has not been professionally installed by our team of experts. Stilo AE0210 Details: Manufacturer: Stilo Manufacturer part number: AE0210 Microphone: Yes, Gentex button shaped microphone that fits in chin bar of all Stilo Helmets Speakers: Yes, mounted in nose reducing padded Stilo Ear Cups Wiring protocol: Female IMSA (4C) The Stilo AE0210 is easily the #1 Stilo electronics wiring kit. Fitting all Stilo ST5 GT helmets that have side ports, SA2020, FIA 8859, FIA 8860-2010 and FIA 8860-2018. The round, button microphone is placed into the factory installed hole in the chinbar padding and ear cups are placed into the recesses on each side of the helmet.  Stilo AE0214 Details: Manufacturer: Stilo Manufacturer part number: AE0214 Audio in: Earbud 3.5mm female jack Microphone: Gentex button shaped microphone that fits in chin bar of all Stilo Helmets Who would want the Stilo AE0214? Anyone with a Stilo helmet with custom earbuds that does not want the ear-cups installed. If you find ear cups uncomfortable and use ear buds, then the Stilo AE0214 electronics kit is for you. Audio In: This Stilo EarBud Rally electronics kit uses the Stilo 3.5mm female earbud jack. All audio will be played into your ear buds. Microphone: Your Stilo helmet has a female recess in the front chin bar to place a microphone. The Stilo EarBud Electronics gives you a microphone that fits into the recessed area of your Stilo chin bar.  Stilo AE0320 Details: Manufacturer: Stilo Manufacturer part number: AE0320 Audio in: Earcup and Earbud, both work at the same time Audio out: Gentex flex boom microphone Stilo description: Gen Boom, Speakers, Earbuds 3.5mm What racers prefer the Stilo AE0320? Anyone with an extremely loud race engine. Some formula cars with the engine close to the driver or a ultra high compression race V8. If your car is very loud, or you went to too many Who concerts when you were younger, this is a great communication upgrade.Audio In: This Stilo Dual Rally electronics kit uses the proven Stilo powered ear cup audio electronics for each ear, but also lets you use your earbuds in addition. The audio will be played into both the ear cups and your earbuds at the same time. Microphone: Your Stilo helmet has a female recess in the cheek pad backing and front chin bar to place a noise canceling microphone. The Stilo Dual Rally & Ear Bud Electronics gives you a Gentex noise canceling microphone on a flex boom. You can place the microphone barely touching your upper lip and save your crew chiefs ears.

Bell SE03 Helmet Shields (Fits GTX.3, GP.3, HP3) Bell SE03 Double Screen Anti-Fog (DSAF) helmet shields are specifically designed for the SA2015 Bell GP.3 and GTX.3 helmets (including carbon fiber models), and the SA2010 Bell HP3 Carbon Helmet. The Double Screen Anti-Fog treatment features variable thickness that exceeds 5mm in the field of vision for excellent clarity and fog-control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) TINT COLORS: Clear High-Resolution Amber Light Smoke Dark Smoke Blue Chrome Silver Chrome Gold Chrome Rainbow Mirror  Red Metallic Multilayer Red, Blue or Green

Sparco Arrow Nomex Gloves The Sparco Arrow racing glove provides incredible grip and superior comfort. The palm is printed with high-grip HTX, a Sparco patented material that increases grip, comfort and dexterity. HTX is strategically placed for maximum steering feel and performance. Another Sparco-exclusive feature is Touch-S technology, a Touch Sensitive index finger and thumb. Sparco's patented fire resistant touch sensitive material allows you to use your touch screen data acquisition electronics or phone lap timer apps without taking off your gloves. The Arrow is ultra-lightweight with pre-curved fingers, external stitching and a unique inner thumb seam that gives unparalleled comfort on long stints. Available in Black/White, Black/Red, Navy, White, and Red. The Sparco Arrow is both FIA and SFI approved. TECHNOLOGY Touch Sensitive finger tips compatible with touch screen data acquisition and lap timer apps Anatomically correct seamless palm that contours to the natural shape of the hand Printed high-grip HTX palm, a Sparco-exclusive material that increases grip, comfort and dexterity External seams and unique inner thumb seam for extreme comfort FIA and SFI approved

Sparco K-Pole Kart Racing Shoe The Sparco K-Pole karting shoe was specifically designed for durability while offering the highest levels of comfort and performance in the kart. Distinctly designed, the K-Pole features a breathable, perforated matte-printed upper with a two-tone contrasting design. For greater grip and pedal sensitivity, the K-Pole has an anatomic inner sole with a low back, allowing the heel to move freely while karting. An all-new ultralight outer sole is anti-slip, anti-static, and oil-resistant.   TECHNOLOGY Matte printed upper with breathable perforations Anatomic inner sole for comfort New high-grip outer sole