Interior shape designed to match the contours and proportions of the human head more closely. The careful balance between front-to-back and side-to-side dimensions results in a shape that fits more people more comfortably.
Sizes XS toXL.
Large, closable intake vents combined with a 10mm vent greatly increase air intake. Larger 10mm rear vent hole increases airflow further compared to previous models.
NEW SHIELD PIVOT HARDWARE
New shield pivot hardware with redesigned track slider that improves aerodynamics. New wider 6-Series shield & eye port for increased peripheral field of view. Shield, pivot hardware, and wider eye port were developed on the RC and are the basis for all 6-Series models.
POSITIVE SHIELD LATCH
Positive latch mechanism provides solid shield latching while allowing normal operation of the shield. Designed to be an integral component of the shield system, not just an add-on afterthought. Simplicity of the function belies the complexity of the design.
HANS POST ANCHORS
Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepst a variety of anchor systems, making installation much easier. Flat surface area around the mounting nut allows the anchor post base to rest flush with the helmet surface. FIA-8858-2010 certification.
Proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance and keep weight and size to a minimum.
STANDARD ACCESSORY KIT
Standard accessory kit with each GP-6RC: Clear A/F installed on helmet; spare shield pivot/screw kit (with shell washers); spare upper vent kit (3-front, 2-rear); set of three Arai decals.
E-JECT READY CROWN PAD
Pre-cut pocket under the crown pad can be easily removed to accommodate the optional E-Ject system.
An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.